HAMOKI J210 User manual

Bonesaw
Instruction Manual
Model: J210, J320
1
Please read this instruction manual carefully before
operation

2
WARNING
SAFETY INSTRUCTIONS
▪Please ensure the proper attire is worn when operating this device.
▪Please be sure to check the worktable before use-if there's any loose
screws, or if there is a shift of motor back cover.
▪Please make sure you install a leakage protection device, this must be
connected with the earth wire.
▪Gloves must be worn when replacing the Saw Band.
▪Never Position fingers or thumbs in line with the blade to avoid serious
personal injury.
▪DO NOT BACK MEAT AWAY from the blade while the saw is running. Plan
your cuts so you always cut through the meat. If you need to back the
meat out, turn the bandsaw off and wait for the blade to come to a
complete stop.
▪Do not twist or put excessive stress on the blade while backing meat
away
▪Do not operate the emergency stop frequently, this can cause damage
to the motor.

3

4

5
Operation

6
Operation

7

8

WARRANTY
9
WARRANTY Hamoki Ltd warrants the original purchaser of every new
product (under normal and proper use and maintenance service as
specified by Hamoki Ltd and upon proper installation and start-up in
accordance with the instruction packet supplied with each unit) a one
year parts warranty.
Hamoki Ltd’s obligation under this warranty is limited to a period of one (1)
year from the date of original installation.
WARRANTY CLAIMS:
All claims for parts must be made directly through the retailer in the first
instance. All claims raised with the retailer should include:
Your name:
Model number:
Your company:
Serial number of the product:
Address: Date of purchase:
Email: Proof of purchase :
Phone:
Information supporting the alleged defect.(A video/photo)
Photo of the dataplate.