HandHeld Image Kiosk 8560 User manual

User’s Guide-
Preliminary CP4
Draft
ImageKiosk8560
withMicrosoft®Windows®CE

Disclaimer
Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information
contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine
whether any such changes have been made. The information in this publication does not represent a commitment on the part of
Hand Held Products.
Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of Hand Held Products.
©2006 Hand Held Products, Inc. All rights reserved.
Web Address: www.handheld.com
Trademarks
Microsoft, Windows, Windows CE, Windows NT, Windows 2000, Windows ME, Windows XP, ActiveSync, Outlook, and the
Windows logo are trademarks or registered trademarks of Microsoft Corporation.
Intel is a registered trademark of Intel Corporation.
Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and
are the property of their respective owners.

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft Rev (a)
6/27/06 iii
Chapter 1 - Agency Information
Required Safety Labels ....................................................................................................................... 1-1
Safety Label, non-RF.................................................................................................................... 1-1
Safety Label, 802.11b Radio ........................................................................................................1-1
Regulatory and Safety Approvals for all IK8560 Devices .................................................................1-2
FCC Compliance.................................................................................................................................1-2
Chapter 2 - Getting Started
IK8560 Features..................................................................................................................................2-1
Connect the Power and Communication Cables.................................................................................2-1
Boot the IK8560..................................................................................................................................2-1
Start Screen .........................................................................................................................................2-1
Task Tray......................................................................................................................................2-2
Setting the Time and Date...................................................................................................................2-2
Using the Soft Input Panel (SIP).........................................................................................................2-3
Adjusting the Backlight.......................................................................................................................2-3
Adjusting the Contrast..................................................................................................................2-4
Using Windows Explorer....................................................................................................................2-4
Selecting Text......................................................................................................................................2-4
Selecting Programs.............................................................................................................................. 2-4
Chapter 3 - Hardware Overview
Front Panel..........................................................................................................................................3-1
Back Panel...........................................................................................................................................3-2
Connectors....................................................................................................................................3-3
Connecting the Power and Communication Cables............................................................................3-4
USB Cable....................................................................................................................................3-4
Standard RS-232 Cable ................................................................................................................ 3-5
RS-232 Pass-Through Cable ........................................................................................................3-5
Rebooting the Device..........................................................................................................................3-6
Warm Boot ...................................................................................................................................3-6
Cold Boot......................................................................................................................................3-6
Using the Reset Switch.................................................................................................................3-6
Screen Protector Replacement ............................................................................................................3-7
Maintenance........................................................................................................................................ 3-8
IK8560 Technical Specifications........................................................................................................3-9
Chapter 4 - Communication
Installing Additional Software............................................................................................................4-1
Microsoft ActiveSync .........................................................................................................................4-2
Exploring the Device from the Host Workstation........................................................................4-5
Adding Programs Using ActiveSync............................................................................................4-6
Synchronizing...............................................................................................................................4-7
Wired Ethernet Communication—IK8560E.......................................................................................4-8
Adding Programs from a Network......................................................................................................4-8
TableofContents

iv Rev (a)
6/27/06 Image Kiosk 8560 User’s Guide-
Preliminary CP4 Draft
USB Host Port .....................................................................................................................................4-9
Chapter 5 - IK8560C—Wireless LAN with 802.11b
Overview .............................................................................................................................................5-1
Configuring the 802.11b Radio ...........................................................................................................5-1
802.11b with Wireless Zero Config..............................................................................................5-1
Disabling Encryption ....................................................................................................................5-2
Editing Radio Configuration.........................................................................................................5-2
Wireless Information Tab .............................................................................................................5-3
Preferred Networks .......................................................................................................................5-4
Wireless Properties Window.........................................................................................................5-5
Advanced Wireless Settings..........................................................................................................5-6
IP Addresses..................................................................................................................................5-7
802.11b Wireless Security...................................................................................................................5-8
Opening the Client ........................................................................................................................5-9
Main Window ...............................................................................................................................5-9
Setup Screens..............................................................................................................................5-12
Saving Your Settings ..................................................................................................................5-12
Configuring Client Authentication..............................................................................................5-13
Configuring a Port.......................................................................................................................5-17
Configuring a Network ...............................................................................................................5-19
Installing Certificates..................................................................................................................5-22
Chapter 6 - Imaging
Overview .............................................................................................................................................6-1
Supported Bar Code Symbologies.......................................................................................................6-1
Default Bar Code Symbologies.....................................................................................................6-1
Scanning a Bar Code ...........................................................................................................................6-2
Omni-Directional Aiming....................................................................................................................6-2
Sample Bar Codes ...............................................................................................................................6-3
Depth of Focus (DOF) Specifications .................................................................................................6-3
Scan Demo...........................................................................................................................................6-4
Auto-Send .....................................................................................................................................6-7
Chapter 7 - Mounting
Overview .............................................................................................................................................7-1
Back Panel Mounting Dimensions ......................................................................................................7-1
Connector Slots....................................................................................................................................7-2
Side Panel Dimensions........................................................................................................................7-2
Chapter 8 - Customer Support
Product Service and Repair .................................................................................................................8-1
Online Product Service and Repair Assistance.............................................................................8-1
Technical Assistance ...........................................................................................................................8-2
Online Technical Assistance.........................................................................................................8-2
Limited Warranty ................................................................................................................................8-3

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft Rev (a)
6/27/06 1 - 1
1
Agency Information
Required Safety Labels
ImageKiosk 8560(IK8560)devices meet orexceedthe requirements ofall applicable standardsorganizationsfor safeoperation.
However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency
guidelines that follow. Please read these guidelines carefully before using your IK8560.
Location
Safety label
Safety Label, non-RF
7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJ
WZRFRQGLWLRQV7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQGWKLVGHYLFH
PXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHG
RSHUDWLRQ 7KLV&ODVV$GLJLWDODSSDUDWXVFRPSOLHVZLWK&DQDGLDQ,&(6&HWDSSDUHLOQXPHULTXHGHOD
1
(
'
0DGHLQ7DLZDQ
ZZZKDQGKHOGFRP
(QWUDGD9P$
&ODVVH$HVWFRQIRUPHDODQRUPH10%GX&DQDGD
+DQG+HOG3URGXFWV,QF
6NDQHDWHOHV)DOOV1<
86$
Safety Label, 802.11b Radio
IK8560 RF devices are designed to comply with the most current applicable standards on safe levels of RF energy developed
by the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) and has
been recommended for adoption by the Federal Communications Commission (FCC).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la
E153740
Made in Taiwan
www.handheld.com
Hand Held Products, Inc.
Skaneateles Falls, NY
13153 USA
Classe A est conforme a la norme NMB-003 du Canada.
Entrada:
12 V 800mA
7D21
N10410
!!
1317
FCC ID: HD585606065 IC: 1693B-85606065
Terminal de captura para Punto de Ventas
,

1 - 2 Rev (a)
6/27/06 Image Kiosk 8560 User’s Guide-
Preliminary CP4 Draft
Regulatory and Safety Approvals for all IK8560 Devices
Parameter Specification
U.S.A. FCC Part 15, Class A
Canada ICES-003
European Community EN 55022 (CISPR 22) Class A; 1998 +A1:2000; +A2:2003
EN60950
EN60825-1
EN55024:1998; +A1:2000; +A2:2003
The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within
the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage Directive.
For further information, please contact:
Hand Held Products, Inc.
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
Hand Held Products, Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.)
that is not CE marked and does not comply with the Low Voltage Directive.
FCC Compliance
IK8560 devices meet or exceed all applicable standards and have been manufactured to the highest level of quality.
IK8560 Batch Device
IK8560 Batch devices comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
IK8560 RF Device With an 802.11b Radio
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio frequencies. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
!
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. To maintain compliance with FCC RF exposure guidelines, use only the accessories specified by the
manufacturer.
Canadian Compliance for IK8560 RF Devices With an 802.11b Radio
This Class A digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft Rev (a)
6/27/06 1 - 3
RF, Regulatory, and Safety Agency Approvals for 802.11b
Parameter Specification
RF Approvals
U.S.A. FCC Part 15-247
Canada RSS 210, RSS GEN
Europe EN300328-1, V.1.6.1:2004-11
EN301489-1, V.1.6.1:2005-09
EN301489-17, V.1.2.1:2002-08
This product is marked with

in accordance with the Class II product requirements specified in the R&TTE
Directive, 1999/5/EC.
The equipment is intended for use throughout the European Community. Its authorization for use in France is restricted as
follows:
PAN European Frequency Range: 2.402 - 2.480 GHz
Restrictions in France are as follows:
•Indoor use - Maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz
•Outdoor use - Maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and maximum power (EIRP*) of 10 mW for
the 2454-2483 MHz band
Pacemakers, Hearing Aids and Other Electrically Powered Devices
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires devices to operate properly
in an EM Field with a strength of 3V/m over a frequency range of 26 to 1000MHz.
The maximum allowable field strength emitted by the IK8560 is 0.3V/m according to Subpart B of Part 1 of the FCC rules.
Therefore, the IK8560 RF has no effect on medical devices that meet the IEC specification.
Microwaves
The radio in the IK8560 RF device operates on the same frequency band as a microwave oven. Therefore, if you use a
microwave within range of the IK8560 RF device you may notice performance degradation in your wireless network. However,
both your microwave and your wireless network will continue to function.
The IK8560 batch device does not contain a radio, and therefore, is not affected by microwave ovens.
Care and Cleaning
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The device can
be cleaned with a damp cloth.
For European Community Users
Hand Held Products complies with Directive 2002/69/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27
January 2003 on waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for its production. It may contain hazardous substances
that could impact health and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources,
we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of
the materials of the product you are disposing in a sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste
and invites you to use the appropriate separate take-back systems for product disposal.

1 - 4 Rev (a)
6/27/06 Image Kiosk 8560 User’s Guide-
Preliminary CP4 Draft
If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste
administration.
You may also contact your supplier for more information on the environmental performances of this product.

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft Rev (a)
6/27/06 2 - 1
GettingStarted
IK8560 Features
The IK8560 comes in two standard versions: the IK8560C with an on-board 802.11b radio and the IK8560E with a wired ethernet
connection. Here is a list of the standard features:
•Microsoft Windows CE 5.0 operating system
•Intel®XScale PXA 255 200MHz processor
•5.7" 320X240 backlit color display
•Touch screen and protective overlay
•64 MB SDRAM and 32 MB Flash ROM of on-board memory
•Support for RS-232, RS-485, USB, and powered USB interfaces
•Ethernet 10/100 Base-T communications port (IK8560E)
•802.11b wireless radio (IK8560C)
•USB host communications port
•Adaptus Imaging Technology
•Beeper
Connect the Power and Communication Cables
The IK8560 has a number of power and communication cables. Use one to apply power to the device.
For more information, see Connecting the Power and Communication Cables on page 3-4.
Boot the IK8560
1. The IK8560 begins booting as soon as power is applied from the cable.
2. The splash screen appears as the system cold boots (see Cold Boot on page 3-6). The software version numbers for both
the bootloader and the kernel appear on the splash screen.
3. The device begins loading software; this is Autoinstall. A status bar appears for each program that loads. Do NOT interrupt
Autoinstall!
4. Autoinstall completes and the splash screen appears again as the system warm boots (see Warm Boot on page 3-6).
5. When the warm boot is complete, you end on the Start screen.
Start Screen
The Start screen is your Desktop for the IK8560. The boot process ends on this screen.
2

2 - 2 Rev (a)
6/27/06 Image Kiosk 8560 User’s Guide-
Preliminary CP4 Draft
Task Tray
The task tray is located at the bottom of every application window and provides access to the Start menu.
Task Tray Icons
Icon Description
Opens the Start menu.
The communication cable is connected. Double-tapping this icon displays the cable type and connection
status.
Wired ethernet cable is not connected.
802.11b radio is not connected
802.11b radio is connected.
Displays the Soft Input Panel (SIP); see Using the Soft Input Panel (SIP) on page 2-3.
Tapping this button enables you to return to the Desktop.
The pop-up menu that appears will also show two programs or windows currently open.
Setting the Time and Date
After the device boots up, set the time and date to set the system clock to real-time.
Double-tap the time on the taskbar
OR