Important Safety Instructions
Read these instructions carefully and save them for future reference.
1. Follow all warnings and instructions marked on the LCD Display.
2. Do not use the LCD near water.
3. Unplug the LCD Display from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Clean only with dry cloth.
4. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
6. Do not defeat the safety purpose of the polarized or grounding–type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wider blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Use only the proper type of power supply cord set (provided in your accessories box) for
this LCD Display. Only use attachments/accessories specified by the manufacturer.
9. Do not place the LCD Display on an unstable cart, stand or table. If the product falls. It
could be seriously damaged. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
10. Unplug this apparatus during lightening storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been spilled or objects have fallen into the apparatus, apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
12. Except as explained elsewhere in this manual, do not attempt to service the LCD Display
yourself. Opening or removing covers might expose you to dangerous voltage points or
other risks. Refer all servicing of marked components to qualified personnel.
13. The LCD Display should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local ower
company.
14. If an extension cord is used in with LCD Display, make sure that the total ampere rating
of the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the local rating of all products plugged into the wall
outlet does not exceed the fuse rating.
Power Source : (for 32” models) Power Source : (for 37” models)
Fabricant : FSP
Type: 194-3F01
Rating: 3.5A, AC~ 100-240V, 50-60Hz
Fabricant : Darfon
Type: B048.001
Rating : 3.5A, AC 100-240V, 50-60Hz
NOTES:
Read all safety and operating instructions before operating your new LCD Display.
To ensure good ventilation, the LCD Display should be at least 10 cm clear of the wall or furniture
and that the ventilation is always kept clean.
For this Display set, the ideal operating temperature is 5 ~ 35 °C and storage temperature is
0 ~ 60 °C.
