Hanwha Techwin SBP-329HM User manual

ENG
Product Overview
Package
SBP-329HM is an adaptor used to install an PNM-9080VQ camera in a
Wall Mount Adaptor (SBP-300WM), Ceiling Mount Adaptor (SBP-
300CM), or Parapet Mount Adaptor(SBP-300LM).
Installation Precautions



Make sure that the installation place can endure at least 4 times of the total weight of the
Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
The Hanging Mount Adaptor can be also connected to 1-1/2” PF screw-thread pipe as
well as to the Wall/Ceiling/Parapet Mount Adaptor.
HANGING MOUNT ADAPTOR SCREW 4EA
Hanging Mount Adaptor
SBP-329HM

Product Specifications
• Weight : 1182g
• Material : Aluminum
• Operation temp. : -50°C~60°C
• Operation hum. : 0~100%
• Ciężar : 1182g
• Materiał : Aluminium
• Temperatura robocza : -50°C~60°C
• Wilgotność robocza : 0~100%
Installation
1
Insert the Hanging Mount Adaptor to 1-1/2”PF screw-thread (female) pipe or
to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300CM/300LM)
and turn it clockwise to secure to the Pipe or Adaptor.
JMake sure you fix the Pipe or Adaptor so that it reaches to the end of the
1-1/2”PF screw thread on the Hanging Mount Adaptor. If not secured tightly,
the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing
physical damage or malfunction.
(Make sure you check the connection between two components before
proceeding with the next step.)
2
Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
mm(inch)
PT01-004979B
Ö
Ö
Ö