Hanwha Techwin SBP-276HM User manual

ENG
Product Overview
Package
SBP-276HM/W is an adaptor used to install an
PNM-9000VQ/9030V/9002VQ camera in a Wall Mount Adaptor
(SBP-300WM/W), Ceiling Mount Adaptor (SBP-300CM/W), or Parapet
Mount Adaptor(SBP-300LM/W).
Installation Precautions
Make sure that the installation place can endure at least 4 times of the total weight of
the Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
The Hanging Mount Adaptor can be also connected to 1.5” PF screw-thread pipe as
well as to the Wall/Ceiling/Parapet Mount Adaptor.
HANGING MOUNT ADAPTOR SCREW 4EA
Hanging Mount Adaptor
SBP-276HM / W

Product Specifications
• Weight : 830g
• Material : Aluminum
• Operation temp. : -50°C~60°C
• Operation hum. : 0~100%
Product Outline
Installation
1
Insert the Hanging Mount Adaptor to 1-1/2”PF screw-thread (female) pipe or
to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM/W or 300CM/W
or 300LM/W) and turn it clockwise to secure to the Pipe or Adaptor.
JMake sure you fix the Pipe or Adaptor so that it reaches to the end of the
1-1/2”PF screw thread on the Hanging Mount Adaptor. If not secured tightly,
the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing
physical damage or malfunction.
(Make sure you check the connection between two components before
proceeding with the next step.)
2
Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
mm(inch)
PT01-005265B
Ö
Ö