Harman Kardon ONE User manual

Quick Start Guide
Guide de demarrage rapide
Buttons and connections
Power turn on/off
What’s in the box
x 1
x 1
x 1
x 1
Speakerphone
LED indication
NFC pairing
Bluetooth®
Harman Kardon One
ONE
HarmanKardon One
Status LED indication
Slow blinking
Fast blinking
On
On
On
On
Off
Blinking
Pairing mode / Incoming call
Not connected
Product On
Connected
Low Power
Charging
Call not active
Product Off
Call active
Blinking
Phone ringing
HarmanKardon One

EN
•Model : Harman Kardon ONE
•Battery type: Lithium-ion polymer
(3.7V, 2000mAh)
•Battery charge time: 3 hour for adapter
•Music playing time: up to 5 hour (varies by
volume level and audio content)
•Bluetooth® version:
•Support: A2DP V1.2, AVRCP V1.4, HFP V1.6,
HSP V1.2
•Bluetooth® transmitter power: 0-4 dBm
•Bluetooth® transmitter frequency range:
2.402-2.480 GHz
•Bluetooth® transmitter modulation:
GFSK, π/4-DQPSK, 8DPSK
•Transducer: 2 x 40mm (1.5’’)
•Rated power: 2 x 6W
•Power Input: 5VDC, 1A
•Frequency response: 100Hz – 20kHz
•Signal-to-noise ratio: ≥80 dB
•Dimensions (H x W x D): xxxx (mm)
•Weight: xxxx g
TR00049_A
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by HARMAN International Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.
FPO
FPO
LTHBlack
TR & Job No:
Job Description:
Date:
Other:
Developedby
RESTRICTED
DESIGN ADAPTATION / IMAGE / FINALART
IMPORTANT NOTE : THE PRINT/PDF IS FOR LAYOUT AND TEXT ILLUSTRATION ONLY. THE COLOURS INDICATED HERE MAY NOT APPEAR SAME IN THE FINAL PROOF. ALTHOUGH
EVERY EFFORT HAS BEEN MADE TO CHECK THE CORRECTION OF LAYOUT AND TEXT. IT IS CLIENT RESPONSIBILITY TO VERIFY BEFORE GIVING THE FINAL APPROVAL.
TR00049_HK_One_QSG_A
Version : 2
TR00049
2014-12-19
AS01/BL02/UK03
N/A
EQUITY COLORS:
REPRESENTATION:
3.0+EDR

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.