Harman Stove Company P35i User manual

www.harmanstoves.com 3-90-775 Rev; 5 November, 2010









• Important operating and
maintenance instructions
included.
• Read, understand and
follow these instructions
for safe installation and
operation.

• Leave this manual with
party responsible for use
and operation.







• Do not store or use gasoline or other am-
mable vapors and liquids in the vicinity of this
or any other appliance.
• Do not overre - If any external part starts to
glow, you are overring. Reduce feed rate.
Overring will void your warranty.
• Comply with all minimum clearances to com-
bustibles as specied. Failure to comply may
cause a house re.
Check building codes prior to installation.
• Installation MUST comply with local, regional, state and
national codes and regulations.
• Consult local building, re ofcials or authorities having
jurisdiction about restrictions, installation inspection, and
permits.



• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room
as replace.
• Alert children and adults to hazards of high
temperatures.
  

• Keep clothing, furniture, draperies and other
ammable materials away.

Glass and other surfaces are
hot during operation AND
cool down.

Tested and approved for use with wood pellets
and a mixture of shelled eld corn and wood
pellets only. Burning any other type of fuel will
void your warranty.
Do Not
Discard


2Pellets or Corn/Pellet Mixture Only 3-90-775 Save These Instructions

Hearth & Home Technologies welcomes you to our tradition of excellence! By choosing a Harman appliance, you
have become part of a long standing family committed to meeting the heating needs of consumers with the most
distinctive, powerful and responsible home heating products available.
The P35i insert has brilliant features in an elegant package, giving you 0 to 35,000 BTU when you need it,
automatically. Aside from the regular, simple cleaning process, you need only set your desired room temperature,
keep the hopper full, and the ash pan empty. With the P35i, you will notice even heat throughout your zone and a
level of convenience you never thought possible. The P35i takes advantage of Harman’s 30+ years of stove design,
technology and manufacturing. Output is managed by a microprocessor that senses the room temperature and
the re temperature with two thermistor probes and then determines the best feed rate for your heating demand.
The platinum combination is Harman’s Patented Pellet ProTM Feeder system, and ESP Control which have been
developed to their highest state. These features work together to allow amazing heat output with little regard for
fuel quality.
We wish you and your family many years of enjoyment in the warmth and comfort of your hearth appliance.
Thank you for choosing Harman Home Heating.
, A division of
Hearth & Home Technologies, Inc.
352 Mountain House Road
Halifax, PA 17032
www.harmanstoves.com









SAMPLE

3
Save These Instructions 3-90-775 Pellets or Corn/Pellet Mixture Only



A. Appliance Certications......................4
B. Mobile Home Approval.......................4
C. Glass Specications...........................4
D. Electrical Rating ................................4
E. BTU & Efciency Specications.........4

A. Carbon Monoxide Warnings &
Considerations....................................5
B. Other Safety Considerations .............5

A. Design, Installation & Location .........6
B. Fire Safety..........................................6
C. Component Locator .........................7
D. Pre-Use Checklist..............................8

A. Appliance Dimensions .......................9
B. Clearances to Combustibles.............10
C. Floor Protection ..............................10
D. Minimum Fireplace Opening
Requirements .................................10
E. Mantel Projections ...........................10
F. Factory Built Fireplaces.....................11

A. Vent Termination Requirements ......12
B. Avoiding Smoke and Odors..............13
C. Venting Requirements / Restrictions 14
D. Existing Fireplace Installation...........15
E. Rear Venting.....................................16
F. Zero Clearance Cabinet ..................16

A. Mobile Home Installation .................17

A. Outside Air Attachment ......................18
B. Installing the Surround ......................19
C. Routing the Power Cord ....................19
D. Securing the Mounting Frame............20
E. Attaching the Venting .........................20
F. Installing the Body Into The Frame.....21
G. Control Board Installation ...................21
H. Room Sensor Installation ..................21
I. Optional Log Kit .................................22
J. Optional Trim Kit ................................22
K. Service Rail Kit ..................................22

A. Fire Safety .........................................23
B. Fuel & Fuel Storage ...........................23
C. General Operating Information ..........24
D. Before Your First Fire ........................26
E. Draft Test Procedure .........................26
F. Starting a Fire "Manual" .....................26
G. Starting a Fire "Automatic" ................27
H. Maintaining The Fire ..........................27
I. Relaxation Mode ................................27
J. Shut-Down Procedure ....................... 27

Troubleshooting Chart..............................28

A. Shut-Down Procedure .......................29
B. Quick Reference Maintenance...........29
C. General Maintenance Procedures .....30
D. Motors and Components....................34

A. Wiring Diagram ..................................38
B. Power Failure / Back-up ....................39
C. Service Parts Listing...........................40
D. Custom Surround Sizes......................44
E. Warranty Policy ..................................45

  Indicates a hazardous situation which, if not avoided will result in death or serious injury.
  Indicates a hazardous situation which, if not avoided could result in death or serious injury.
  Indicates a hazardous situation which, if not avoided could result in minor or moderate injury.
  Indicates practices which may cause damage to the appliance or to property.

4Pellets or Corn/Pellet Mixture Only 3-90-775 Save These Instructions

Hopper Capacity-
#1-70-774235 (23½ ")


Model: P35i Insert
Laboratory: OMNI-Test Laboratories, Inc.
Report No. 135-S-25-6.2
Type: Solid Fuel Room Heater / Fireplace
Insert.
Standard(s): ASTM E1509-04, ULC S628-93 and
ULC/ORD C1482-M1990



This appliance is approved for Installation in mobile/
manufactured homes. The structural integrity of the
mobile home oor, ceiling and walls must be main-
tained. The appliance must be properly grounded to
the frame of the mobile home, and must never be
installed in a room designated for sleeping. The unit
must have provisions for an outside air source when
installed in a mobile home.


This appliance is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please
contact your dealer for replacement glass if needed.
115 VAC, 60 Hz,
3.6 Amps (Start-up); avg. 1.5 Amps (Normal Run)

Particulate Emissions
Rating:
*BTU Input:
Heating Capacity:
Hopper Capacity-
#1-70-774195 (19½ ")
Fuel:
Shipping Weight:
41 lbs.
Wood pellets / Corn†
289 lbs.
1,500 sq. ft.
0 or 6,000 - 35,000 / hr
Exempt from EPA per
40 CFR, Method 28A
* BTU input will vary, depending on the type of
fuel you use in your stove. Moisture and ash
content can affect performance.
† Corn is approved for burning only when mixed
with wood pellets.
62 lbs.

5
Save These Instructions 3-90-775 Pellets or Corn/Pellet Mixture Only




       
      
        




     
    


    
Carbon monoxide, referred to as CO, is a colorless,
odorless gas that is produced during combustion of solid
fuels. 
Even though this stove is designed to be as safe
as possible, it is recommended that you  
 This is true for oil, gas, or wood burning
products as well.
CO is not specically heavier or lighter than air.
Therefore, it is best to install the detector at table top level
rather than on the ceiling like a smoke detector.
CO detectors are very sensitive and may sound an
alarm for fumes other than CO or CO from sources other
than the stove such as a car or lawn mower exhaust.

1. Increase house ventilation by opening windows or
doors.
2. Make sure the stove doors and hopper lid are closed
and latched.
3. Check stove for electrical power and normal opera-
tion.
4. Check vent for possible blockage or down-draft.
5. Check for false alarm.
Never use gasoline, lantern fuel, kerosene, charcoal
lighter uid, or similar liquids to start or “freshen up” a
re in this heater. Keep all such liquids well away from
the heater while it is in use.


