Harman JBL Club-704 User manual

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC
receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
18. Do not expose batteries to excessive heat such as sunshine, fire or the like.
For Products That Transmit and
Receive RF Energy:
FCC Regulations (USA Only)
FCC Information For Users
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference; and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio
or television reception, which can be determined by turning
the equipment off and then on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•Increase the separation between the equipment and
receiver.
•Connect the equipment to a different outlet so that the
equipment and receiver are on different branch circuits.
•Consult the dealer or an experienced radio/TV technician
for help.
NOTE: Changes or modifications not expressly approved
by Harman could void the user’s authority to operate the
equipment.
IC Statement and Warning (Canada Only)
This Class B digital apparatus complies with Canadian ICES-
003. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
For Canadian Model
This Class B digital apparatus complies with Canadian
ICES-003.
Modèle pour les Canadien
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
For Products with Radio Receivers
That Can Use an External Antenna:
CATV or Antenna Grounding
If an outside antenna or cable system is connected to this
product, be certain that it is grounded so as to provide some
protection against voltage surges and static charges. Section
810 of the National Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements of the grounding electrode.
Note to CATV System Installer:
This reminder is provided to call the CATV (cable TV) system
installer’s attention to article 820-40 of the NEC, which
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as possible.
For CD/DVD/Blu-ray Disc™Players:
Caution:
This product uses a laser system. To prevent direct exposure
to the laser beam, do not open the cabinet enclosure or defeat
any of the safety mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM. To ensure proper use
of this product, please read the owner’s manual carefully and
retain it for future use. Should the unit require maintenance
or repair, please contact your local Harman Kardon service
center. Refer servicing to qualified personnel only.
For Products That Include Batteries:
Instructions for Users on Removal and Disposal of
Used Batteries.
CAUTION
Risk of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Alkaline batteries are considered nonhazardous.
Rechargeable batteries (i.e., nickel cadmium, nickel metal-
hydride, lithium and lithium-ion) are considered hazardous
household materials and may pose an unnecessary health
and safety risk.
In the European Union and other locations, it is illegal to
dispose of any battery with household trash. All batteries
must be disposed of in an environmentally sound manner.
Contact your local waste management officials for information
regarding the environmentally sound collection, recycling and
disposal of used batteries.
To remove the batteries from your equipment or remote
control, reverse the procedure described for inserting
batteries in the owner’s manual.
For products with a built-in battery that lasts for the lifetime of
the product, removal may not be possible for the user. In this
case, recycling or recovery centers handle the dismantling of
the product and the removal of the battery. If, for any reason, it
becomes necessary to replace such a battery, this procedure
must be performed by authorized service centers.
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
BDS 270 / BDS 570 harman/kardon
2 of 86


Each precaution in this manual should be followed during servicing.
Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with
, use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the
parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably
insulated from the supply circuit before retuming the product to the customer.
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and
semiconductor "chip" components.
The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on
your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to
prevent electrostatic charge build-up or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can generate electrical charges
sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical change sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement
ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material.)
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the
chassis or circuit assembly into which the device will be installed.
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together
or your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES devices.
CAUTION :


SAFETY PRECAUTIONS
The following check should be performed for the continued
protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Measure leakage current to a known earth ground (water
pipe, conduit, etc.) by connecting a leakage current tester
between the earth ground and all exposed metal parts of the
appliance (input/output terminals, screwheads, metal
overlays, control shaft, etc.). Plug the AC line cord of the
appliance directly into a 120V AC 60Hz outlet and turn the
AC power switch on. Any current measured must not exceed
o.5mA.
ANY MEASUREMENTS NOT WITHIN THE LIMITS
OUTLINED ABOVE ARE INDICATIVE OF A
POTENTIAL SHOCK HAZARD AND MUST BE
CORRECTED BEFORE RETURNING THE APPLIANCE
TO THE CUSTOMER.
Device
under
test
Test all
exposed metal
surfaces
Also test with
plug reversed
(Using AC adapter
plug as required)
AC Leakage Test
Leakage
current
tester
Reading should
not be above
0.5mA
Earth
ground


1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
GAIN
min-max
Crossover
Power supply
GROUND
+12V
32Hz-320Hz 12dB/oct
23
1
4
A
LO
Hi
Hi2
LP/HP PASS
2 3
1
4
A
HPF
LPF
FULL
LW/HI input
30kHz320Hz32Hz
Input selector Controls
Block diagram
DWG NO:
PART NO:
PART NAME:
PRODUCT MODE:
Page Number:
UNIT: MM
SIZE: A2
REV:A1
DRAW BY:
CHECKED BY:
APPROVED BY:
DATA:
DATA:
DATA:
CLUB/REF704A
PLACE NO DESCRIPTON DATA
ZJS 2016-03-01
1/1
AGND
REV
ADAS INPUT
ADAS ASSIGN
MCU
SN8P2751P8AD
HT7550
DC-DC
MCU STM32F103 to STM32F105,I/O 2014-11-01
A1K1 A2K2
Power/Protect
White/RED
AMP
OP
11
22
33
REM
FL INPUT
MIX
OP
Phase Power Amplifier
Class H
2Ω/4Ω
2 3
1
4
A
HPF
LPF
FULL
LW/HI input
Controls
AGND
FR
OP
Phase Power Amplifier
Class H
2Ω/4Ω
2 3
1
4
A
HPF
LPF
FULL
LW/HI input
Controls
AGND
RL
OP
Phase Power Amplifier
Class H
2Ω/4Ω
2 3
1
4
A
HPF
LPF
FULL
LW/HI input
Controls
AGND
RR
OP
Phase Power Amplifier
Class H
2Ω/4Ω
CLUB/REF704A Block diagram
2 5
1
3
4
ADASFL
ADASFR
ADASRL
ADASRR
OP
MIX
OP
PRE L OUT
PRE R OUT
PREL
PRER
1
2
3
4
5

AGND
HALOSONIC
INPUT
HALOSONIC INPUT
ADAS FL
OP OP OP
OP
OP
PRE
PRE OUTPUT
OP
Crossover
32Hz-320Hz 12dB/oct
LP/HP PASS
30kHz320Hz32Hz
OP
Crossover
32Hz-320Hz 12dB/oct
LP/HP PASS
30kHz320Hz32Hz
OP
Crossover
32Hz-320Hz 12dB/oct
LP/HP PASS
30kHz320Hz32Hz
OP
INPUT
MIX
OP
INPUT
MIX
OP
INPUT
MIX
OP
GAIN
min-max
OP
GAIN
min-max
OP
GAIN
min-max
OP
23
1
4
A
LO
Hi
Hi2
Input selector
OP
23
1
4
A
LO
Hi
Hi2
Input selector
OP
23
1
4
A
LO
Hi
Hi2
Input selector
OP
RCA FL HALOSONIC L
SIGNAL DET
HALOSONIC R ADAS FR
ADAS RL
ADAS RR
RCA FR
AGND
JBLCUSTOMER:

1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
C22A
106/16V
R36A
5.9K
C23A
22P
R38A
20K
R35A
10K
C21A
106/16V
R35B
10K
C20B
106/16V
C22C
106/16V
R36C
5.9K
R35C
10K
C21C
106/16V
C22D
106/16V
R36D
5.9K
R35D
10K
C21D
106/16V
Q5
8050D
R31A
510R
R65A
10K
ADAS_MUTE
Q7
8050D
R65C
10K
Q8
8050D
R65D
10K
R31C
510R
R31D
510R
ADAS_MUTE
AGND
AGND
R32A
1R
R32C
1R
R32D
1R
C19A
106/16V
R26A
100R
2
1
3
SW2A
SW-SPDT
5
4
6
SW2B
SW-SPDT
11
2
3
1
84
U10A
4580
+15V
-15V
FL-VR
C22B
106/16V
R36B
5.9K
Q6
8050D
R31B
510R
R65B
10K
AGND
R32B
1R
FR-VR
ADAS_MUTE
8
7
9
SW2C
SW-SPDT
11
10
12
SW2D
SW-SPDT
2
6
5
7
U10B
4580
RL-VR
14
13
15
SW2E
SW-SPDT
17
16
18
SW2F
SW-SPDT
7
20
19
21
SW2G
SW-SPDT
23
22
24
SW2H
SW-SPDT
5
RR-VR
TP19
TP20
TP21
TP22
R20A
22K
C16A
100P
R21A
10K
R23A
10K
R22A
10K
R24A 10K
C13A
106/16V
C14A
106/16V
C15A
47P
6
5
7
U8B
4580
C17A 22P
C12A
NF
AGND AGND
+15V
-15V
R20B
22K
C16B
100P
R21B
10K
R23B
10K
R22B
10K
R24B 10K
C13B
106/16V
C14B
106/16V
C15B
47P
2
3
1
84
U8A
4580
C17B 22P
C12B
NF
AGND AGND
R20C
22K
C16C
100P
R21C
10K
R23C
10K
R22C
10K
R24C 10K
C13C
106/16V
C14C
106/16V
C15C
47P
6
5
7
U9B
4580
C17C 22P
C12C
NF
AGND AGND
+15V
-15V
R20D
22K
C16D
100P
R21D
10K
R23D
10K
R22D
10K
R24D 10K
C13D
106/16V
C14D
106/16V
C15D
47P
2
3
1
84
U9A
4580
C17D 22P
C12D
NF
AGND AGND
ADRR-
ADRR+
ADRL-
ADRL+
ADFR-
ADFR+
ADFL+
ADFL-
RJ45
1 2
L3A 2.5KZ
1 2
L4A 2.5KZ
1 2
L5A 2.5KZ
1 2
L6A 2.5KZ
1 2
L7A 2.5KZ
1 2
L8A 2.5KZ
1 2
L9A 2.5KZ
1 2
L10A 2.5KZ
ADAS INPUT
AD_FL+
3
2
1
U12A
4580
AGND
+-
-
C19B
106/16V
R26B
100R
C19C
106/16V
R26C
100R
R27C
10K
2
3
1
84
U11A
4580
AGND
C19D
106/16V
R26D
100R
R27D
10K
6
5
7
U11B
4580
AGND
C23B
22P
R38B
20K
AGND
5
6
7
8 4
U12B
4580
-15V
+15V
C23C
22P
R38C
20K
3
2
1
U13A
4580
AGND
C23D
22P
R38D
20K
AGND
5
6
7
8 4
U13B
4580
-15V
+15V
+15V
-15V
AD_FL-
AD_FR+AD_FR-AD_RL+AD_RL-
AD_RR+AD_RR-
AGND
12
E4D NF
12
E3D NF
12
E4C NF
12
E3C NF
EGND
12
E3A NF
12
E4A NF
12
E3B NF
12
E4B NF
ADAS_MUTE
EGND
R34A
10K
C20A
106/16V
R27A
10K
AGND
R28A
47K
2
3
1
84
U6A
4580
+15V
-15V
-
R29A
100K
AGND
HS-LO
R27B
10K
R28B
47K
6
5
7
U6B
4580
R29B
100K
AGND
HS-RO
R34B
10K
C21B
106/16V
AGND
R28C
47K
2
3
1
84
U7A
4580
+15V
-15V
R29C
100K
AGND
HS-LO
R34C
10K
C20C
106/16V
ADAS_MUTE
R28D
47K
6
5
7
U7B
4580
R29D
100K
AGND
HS-RO
R34D
10K
C20D
106/16V
ADAS SCH
DWG NO:
PART NO:
PART NAME:
PRODUCT MODE:
Page Number:
UNIT: MM
SIZE: A4
REV:T1-01
DRAW BY:
CHECKED BY:
APPROVED BY:
DATA:
DATA:
DATA:
PLACE NO DESCRIPTON DATA
2016-03-01
1/2
REV
ZJS
FL-EQ
FR-EQ
RL-EQ
RR-EQ
-
-
2
3
1
84
U24A
4580
ADAS Detect
C4G
100P
C3G
100P
6
5
7
U24B
4580
C1G
224
R1G 470K
R2G 470K
R3G 470K
R4G 470K
R10G
470K
R9G
470K
AD_FR+
AD_RL+
AD_FL+
AD_RR+
AD_FR-
AD_RL-
AD_FL-
AD_RR-
C2G
224
R5G 470K
R6G 470K
R7G 470K
R8G 470K
C5G
224
R11G
10K
R12G 15.8K
C6G
100P
R13G
1.5K
R15G
33K
R16G
33K
C9G
106/16V
C8G
106/16V
AD12V
AD12V
VREF_AD
VREF_AD
C7G
0R ADAS_DET
TP23
-15V
ADAS_MUTE
C41A
226/16V
EC
BQ1
A1015
R61A
10K
R62A
1K
R63A
20K
R64A
100R
+15V
R60A
2K2
AGND
ADASMUTE ADAS_MUTE
12
3 4
U25
P185
PGND
R14G
100R/1206
P12VA
R37A
NF
R37B
NF
R37C
NF
R37D
NF
C40A
226/16V
R30A
1K
R33A
NF
R30B
1K
R33B
NF
R30C
1K
R33C
NF
R30D
1K
R33D
NF
PGND
PGND
C42A
100uF/16V
AD_FL
AD_FR
AD_RL
AD_RR
ADFL
ADFR
ADRL
ADRR
25
SW2I
SW-SPDT
EGND
FL+ 1
FL- 2
FR+ 3
FR- 6
RL+ 5
RL- 4
RR+ 7
RR- 8
9
10
JK2
121103000003
C10G
470uF/25V
C11G
100u/25V
CLUB/REF704
JBLCUSTOMER:

1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
PRE SCH
DWG NO:
PART NO:
PART NAME:
PRODUCT MODE:
Page Number:
UNIT: MM
SIZE: A3
REV:T1-01
DRAW BY:
CHECKED BY:
APPROVED BY:
DATA:
DATA:
DATA:
PLACE NO DESCRIPTON DATA
2016-03-01
2/2
REV
ZJS
R39A
10K
C24A
47P
R41A
10K
R40A 10K
R42A
11K
C25A
333
R44A
12K
C26A
563
R43A
10K
4
5
6
VR3B
C100K
1
2
3
VR3A
C100K
FLAT_FL
LPF_FL
HPF_FL 2
3
1
8 4
U20A
4580
R46A
1K
FLAT_FR
LPF_FR
HPF_FR
R47A
0R
R45A
10K
C27A
NC
R48A
NC
3 2
1
4
SW3A
110103000062
7 6
5
8
SW3B
110103000062
9
10
11
12
SW3C
110103000062
Crossover 32Hz - 320Hz 12dB/oct
Crossover 32Hz - 320Hz 12dB/oct
R39B
10K
C24B
47P
R41B
10K
R40B 10K
R42B
11K
C25B
333
R44B
12K
C26B
563
R43B
10K
10
11
12
VR3D
C100K
7
8
9
VR3C
C100K
6
5
7
U20B
4580
R46B
10K
R47B
10K
R45B
10K
C27B
22P
3
2
1
U14A
4580
5
6
7
8 4
U14B
4580
3
2
1
U16A
4580
5
6
7
8 4
U16B
4580
3
2
1
U18A
4580
5
6
7
8 4
U18B
4580
R39C
10K
C24C
47P
R41C
10K
R40C 10K
R42C
11K
C25C
333
R44C
12K
C26C
563
R43C
10K
4
5
6
VR4B
C100K
1
2
3
VR4A
C100K
FLAT_RL
LPF_RL
HPF_RL 2
3
1
8 4
U21A
4580
R46C
1K
FLAT_RR
LPF_RR
HPF_RR
R47C
0R
R45C
10K
C27C
NC
R48C
NC
3 2
1
4
SW4A
110103000062
7 6
5
8
SW4B
110103000062
9
10
11
12
SW4C
110103000062
Crossover 32Hz - 320Hz 12dB/oct
Crossover 32Hz - 320Hz 12dB/oct
R39D
10K
C24D
47P
R41D
10K
R40D 10K
R42D
11K
C25D
333
R44D
12K
C26D
563
R43D
10K
10
11
12
VR4D
C100K
7
8
9
VR4C
C100K
6
5
7
U21B
4580
R46D
10K
R47D
10K
R45D
10K
C27D
22P
3
2
1
U15A
4580
5
6
7
8 4
U15B
4580
3
2
1
U17A
4580
5
6
7
8 4
U17B
4580
3
2
1
U19A
4580
5
6
7
8 4
U19B
4580
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
+15V
+15V
+15V
+15V
+15V
+15V
+15V
+15V
-15V
-15V
-15V
-15V
-15V
-15V
-15V
-15V
FL+SG
FR-SG
RL+SG
RR-SG
TP24
TP25
TP26
TP27
+
C30D
104
+15V
-15V
C31D
104
C32D
104
C33D
104
C34D
104
C35D
104
C36D
104
C37D
104
C38D
104
C28D
104
C29D
104 C40D
104
C39D
104
C41D
100uF/25V
C42D
100uF/25V
AGND
C43D
104
C44D
104
FL-EQ
FR-EQ
RL-EQ
RR-EQ
2
3
1
84
U22A
4580
AGND
+15V
-15V
FL-EQ
TP28
Q2
NF
PRE_MUTE
R52A
47K
C28A
22P
1 2
R50A
47K
R57A
4.7K
C30A
106/16V
R56A
220R
R55A
22K
C31A
100P
-
AGND
FR-EQ R52B
47K
C28B
22P
1 2
R50B
47K
PRE_RO
6
5
7
U22B
4580
1 2
R51A
47K
RL-EQ
RR-EQ 1 2
R51B
47K
+
+
+
+
-
+
-
+
R49A
3.3K
RTA
PTC 300R
PRE_LO
R49B
3.3K
RTB
PTC 300R
R49C
3.3K
RTC
PTC 300R
R49D
3.3K
RTD
PTC 300R
M1 M2 M3 M4
ALL MARK
M5 M6
M7 M8
AGND
TP29
Q3
NF
R57B
4.7K
C30B
106/16V
R56B
220R
R55B
22K
C31B
100P
AGND
PRE_MUTE
2
3
1
84
U23A
4580
AGND
+15V
-15V
R54A
5.49K
C29A
22P
+
1 2
R53A
10K
-
AGND
R54B
5.49K
C29B
22P
6
5
7
U23B
4580
1 2
R53B
10K
FL-VR
FR-VR
RL-VR
RR-VR
FL+SG
FR-SG
RL+SG
RR-SG
FR-SG
FL+SG
RL-VR
FL-VR
HS-LO
RR-SG
RL+SG
RR-VR
FR-VR
HS-RO
P1
AGND AGND
HS-ROHS-LO
-15V+15V
PRE_LO
PRE_RO
AGND
1
2
3
4
5
67
8
9
10
11
12
CN2A
CN2X6P2.5
P1 PRE_MUTE PRE_MUTE
PRE_LO
PRE_RO
PGND
ADAS_DET
ADASMUTE
P12VA
ADAS_DET
ADASMUTE
P12VA
AGNDAGND
1
2
3
4
5
6
13
8
9
10
11
12
7
14
CN1A
CN2X7P2.5
M9 M10 M11 M12
CB
104
MT1
M3
MT2
M3
AGND
CA
104
EGND
MT3
M3
MT4
M3
MT5
M3
CC
104
AGND
ZD1
1.8V
ZD2
1.8V
AGND PGND
CLUB/REF704
JBLCUSTOMER:

1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
12
E1A
NF
12
E2A
NF
C1A
226/16V
C2A
NF
R8A
22K
R9A
10K
R10A
10K
C3A
106/16V
C4A
106/16V
LOW FL
AGND
C5A
47P
HI2 FL-1
LOW FL-1
R4A
47K
R5A
47K
R6A
0R
R7A
0R
R2A
270R
1
2
RCA1A
120203000085
6
5
7
U1B
4580
C6A
100P
R11A
10K
R12A 10K
C7A 22P
3 2
4
1
SW1A
110103000061
7 6
8
5
SW1B
110103000061
R8B
22K
C6B
100P
R9B
10K
R11B
10K
R10B
10K
R12B 10K
1 2
E1B
NF
12
E2B
NF
C3B
106/16V
C4B
106/16V
LOW FR
C1B
226/16V
C5B
47P
HI2 FR-1
LOW FR-1
C2B
NF
FR
2
3
1
84
U1A
4580
3
4
RCA1B
120203000085
R4B 47K
R5B
47K
R7B
0R
R6B 0R
R2B
270R
C7B 22P
11 10
12
9
SW1C
110103000061
15 14
16
13
SW1D
110103000061
L1A
2.5KZ
L2A
2.5KZ
L1B
2.5KZ
L2B
2.5KZ
FL
R3A
270R
R3B
270R
12
E1C
NF
12
E2C
NF
C1C
226/16V
C2C
NF
R8C
22K
R9C
10K
R10C
10K
C3C
106/16V
C4C
106/16V
LOW RL
C5C
47P
HI2 RL-1
LOW RL-1
R4C
47K
R5C
47K
R6C
0R
R7C
0R
R2C
270R
5
6
RCA1C
120203000085
6
5
7
U2B
4580
C6C
100P
R11C
10K
R12C 10K
C7C 22P
19 18
20
17
SW1E
110103000061
23 22
24
21
SW1F
110103000061
R8D
22K
C6D
100P
R9D
10K
R11D
10K
R10D
10K
R12D 10K
1 2
E1D
NF
12
E2D
NF
C3D
106/16V
C4D
106/16V
LOW RR
C5D
47P
HI2 RR-1
LOW RR-1
C2D
NF
RR
2
3
1
84
U2A
4580
7
8
RCA1D
120203000085
R4D 47K
R5D
47K
R7D
0R
R6D 0R
R2D
270R
C7D 22P
27 26
28
25
SW1G
110103000061
31 30
32
29
SW1H
110103000061
L1C
2.5KZ
L2C
2.5KZ
L1D
2.5KZ
L2D
2.5KZ
RL
R3C
270R
R3D
270R
C36
105/25V
C35
105/25V
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
+15V
+15V
+15V
-15V
-15V -15V
9
10
RCA1E
120203000085
11
12
RCA1F
120203000085
12
E4E ESD
12
E5E ESD
AGND
PRE_LO
PRE_RO
TP1
TP2
TP3
TP4
TP5
TP6
TP7
TP8
1
2
3
4
5JK1
CK3.5-18
L
R
1 2
L1E
2.5KZ
1 2
L2E
2.5KZ
12
E2E NF
12
E1E NF
Halosonic INPUT
C9A
22P
R15A
2.2K
R13A
2K
R14A
1K
4
5
6
VR1B B20K
C8A
100P
AGND
AGND
TP9
1
2
3
VR1A B20K
FR-VR
FL-VR
RL-VR
RR-VR
C10A
0R
TP16
TP17
TP13
TP14
C9B
22P
R15B
2.2K
R13B
2K
R14B
1K
C8B
100P
AGND
AGND
TP10
C10B
0R
C9C
22P
R15C
2.2K
R13C
2K
R14C
1K
4
5
6
VR2B B20K
C8C
100P
AGND
AGND
TP11
C10C
0R
1
2
3
VR2A B20K
C9D
22P
R15D
2.2K
R13D
2K
R14D
1K
C8D
100P
AGND
AGND
TP12
C10D
0R
INPUT SCH
DWG NO:
PART NO:
PART NAME:
PRODUCT MODE:
Page Number:
UNIT: MM
SIZE: A3
REV:A1
DRAW BY:
CHECKED BY:
APPROVED BY:
DATA:
DATA:
DATA:
CLUB/REF704
PLACE NO DESCRIPTON DATA
2016-03-01
1/6
REV
ZJS
JBL
-
1 2
L3E
2.5KZ
12
E3E NF
-
C34
104
C33
104
C32
104
C31
104
RREL
RRER
HI2 FR
HI1 FR
HI1 FR-1
HI1 FL
HI1 FL-1
HI2 RL
HI1 RL
HI1 RL-1
HI2 RR
HI1 RR
HI1 RR-1
C1D
226/16V
2
3
1
8 4
U3A
4580
+15V
-15V
6
5
7
U3B
4580
2
3
1
8 4
U4A
4580
-15V
+15V
6
5
7
U4B
4580
A1A2
A3A4
FL-
FR-
FR+
FL+
RL-
RL+
RR-
RR+
A5A6
A7A8
1 2
L5E
2.5KZ
1 2
L6E
2.5KZ
1 2
L7E
2.5KZ
12
E6E ESD
RREG
6
5
7
U5B
4580
R1E
22K
C5E
100P
R2E
10K
R4E
10K
R3E
10K
R5E 10K
C2E
106/16V
C3E
106/16V
C4E
47P
C6E 22P
C1E
226/16V
AGND AGND
HS-LO
2
3
1
84
U5A
4580
+15V
-15V
R1F
22K
C5F
100P
R2F
10K
R4F
10K
R3F
10K
R5F 10K
C2F
106/16V
C3F
106/16V
C4F
47P
C6F 22P
C1F
NF
AGND AGND
HS-RO
HS-R+
HS-R-
C7E
106/16V
C7F
106/16V
C30
104
EG1
HI2 FL
C37
105/25V
C38
105/25V
TO PRE BOARD
FL-VR
FR-VR
RL-VR
RR-VR
FL+SG
FR-SG
RL+SG
RR-SG
FR-SG
FL+SG
RL-VR
FL-VR
HS-LO
RR-SG
RL+SG
RR-VR
FR-VR
HS-RO
1
2
3
4
5
6
13
8
9
10
11
12
7
14
CN1
CN2X7P2.5
P1
AGND AGND
HS-ROHS-LO
-15V+15V
PRE_LO
PRE_RO
AGND
1
2
3
4
5
6 7
8
9
10
11
12
CN2
CN2X6P2.5
P1 PRE_MUTE PRE_MUTE
PRE_LO
PRE_RO
PGND
ADAS_DET
ADASMUTE
P12VA
ADAS_DET
ADASMUTE
AGNDAGND
HS-L+
EG
EG
EG
EG
EG
+15V
-15V
P12VA
C0A
NF
AGND
AGND
C0B
NF
C0C
NF
AGND
AGND
C0D
NF
CUSTOMER:

1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
R103
2K
R113
1K
C103
100u/35V
Q101
C1815 R107
47R
R110
6K8
R111
47R
Q103
C1815
Q102
A1015
Q104
A1015
R108
47R
R112
47R
R109
6K8
Q108
2SD669
Q107
MPSA13
C106
104/50V
R116
3K3
R117
5K6
Q105
2N5401
Q106
2N5551
1 2
C104
100P
R114
47R
R115
47R
12
C105
100P
R125
620R
D101
IN4148
R127
5.76K
Q112
C1815
C110
104
Q109
2SB649
R126
620R
D102
IN4148
R128
5.76K
R130
4R7/1W
C111
104/250V
C109 47P
R120
10K
+VCC
R106
1K
R104
10K
R105
1K
R129
5.76K
-VCC
Q110
TIP35C
Q111
TIP36C
1
2
3
4
JK3
SPK-JK3A-D Front
C101
10uF/25V
C107
101/50V
C108
101/50V
D103
BAS316
C102
470P
-AMP+AMP
PROT
FR-SG
R203
2K
R213
1K
C203
100u/35V
Q201
C1815 R207
47R
R210
6K8
R211
47R
Q203
C1815
Q202
A1015
Q204
A1015
R208
47R
R212
47R
R209
6K8
Q208
2SD669
Q207
MPSA13
C206
104/50V
R216
3K3
R217
5K6
Q205
2N5401
Q206
2N5551
1 2
C204
100P
R214
47R
R215
47R
12
C205
100P
R225
620R
D201
IN4148
R227
5.76K
Q212
C1815
C210
104
Q209
2SB649
R226
620R
D202
IN4148
R228
5.76K
R230
4R7/1W
C211
104/250V
C209 47P
R220
10K
R221
220R/1W
+VCC
R206
1K
R204
10K
R205
1K
R229
5.76K
-VCC
Q210
TIP35C
Q211
TIP36C
C201
10uF/25V
C207
101/50V
C208
101/50V
D203
BAS316
C202
470P
-AMP+AMP
PROT
FL+SG
AMP FRONT CH
DWG NO:
PART NO:
PART NAME:
PRODUCT MODE:
Page Number:
UNIT: MM
SIZE: A3
REV:A1
DRAW BY:
CHECKED BY:
APPROVED BY:
DATA:
DATA:
DATA:
PLACE NO DESCRIPTON DATA
2016-03-01
2/6
REV
ZJS
AGND
AGND
AGND
AGND AGND
AGND
AGND
AGND
AGND
AGND AGND
R121
220R/1W
FL+outFR-out
+VCC_H
-VCC_H
+VCC_H
-VCC_H
FR-out
FL+out
FL+out
FR-out
+VCC
-VCC
+VCC_H
-VCC_H
R222
0.15R/5W
R223
0.15R/5W
R122
0.15R/5W
R123
0.15R/5W
FL_H
FL_L
FR_H
FR_L
C112
681/50V
AGND
C113
681/50V
AGND
C114
102/100V
C212
681/50V
AGND
C213
681/50V
AGND
TP22P
TP23P
R201
620R
R202
620R
R101
620R
R102
620R
CLUB/REF704
JBLCUSTOMER:

1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
R303
2K
R313
1K
C303
100u/35V
Q301
C1815 R307
47R
R310
6K8
R311
47R
Q303
C1815
Q302
A1015
Q304
A1015
R308
47R
R312
47R
R309
6K8
Q308
2SD669
Q307
MPSA13
C306
104/50V
R316
3K3
R317
5K6
Q305
2N5401
Q306
2N5551
1 2
C304
100P
R314
47R
R315
47R
12
C305
100P
R325
620R
D301
IN4148
R327
5.76K
Q312
C1815
C310
104
Q309
2SB649
R326
620R
D302
IN4148
R328
5.76K
R330
4R7/1W
C311
104/250V
C309 47P
R320
10K
+VCC
R306
1K
R304
10K
R305
1K
R329
5.76K
RR-out
-VCC
Q310
TIP35C
Q311
TIP36C
1
2
3
4
JK4
SPK-JK3A-D REAR
C301
10uF/25V
C307
101/50V
C308
101/50V
D303
BAS316
C302
470P
-AMP+AMP
PROT
RR-SG
R403
2K
R413
1K
C403
100u/35V
Q401
C1815 R407
47R
R410
6K8
R411
47R
Q403
C1815
Q402
A1015
Q404
A1015
R408
47R
R412
47R
R409
6K8
Q408
2SD669
Q407
MPSA13
C406
104/50V
R416
3K3
R417
5K6
Q405
2N5401
Q406
2N5551
1 2
C404
100P
R414
47R
R415
47R
12
C405
100P
R425
620R
D401
IN4148
R427
5.76K
Q412
C1815
C410
104
Q409
2SB649
R426
620R
D402
IN4148
R428
5.76K
R430
4R7/1W
C411
104/250V
1 2
C409 47P
R420
10K
+VCC
R406
1K
R404
10K
R405
1K
R429
5.76K
-VCC
Q410
TIP35C
Q411
TIP36C
C401
10uF/25V
C407
101/50V
C408
101/50V
D403
BAS316
C402
470P
-AMP+AMP
PROT
RL+SG
AMP REAR CH
DWG NO:
PART NO:
PART NAME:
PRODUCT MODE:
Page Number:
UNIT: MM
SIZE: A3
REV:A1
DRAW BY:
CHECKED BY:
APPROVED BY:
DATA:
DATA:
DATA:
PLACE NO DESCRIPTON DATA
2016-03-01
3/6
REV
ZJS
AGND
AGND
AGND
AGND AGND
AGND
AGND
AGND
AGND
AGND AGND
R421
220R/1W
R321
220R/1W
RL+out
+VCC_H
-VCC_H
+VCC_H
-VCC_H
RR-out
RL+out
RL+out
RR-out
+VCC
-VCC
+VCC_H
-VCC_H
R422
0.15R/5W
R423
0.15R/5W
R322
0.15R/5W
R323
0.15R/5W
RL_H
RL_L
RR_H
RR_L
TP24P
TP25P
R401
620R
R402
620R
R301
620R
R302
620R
CLUB/REF704
JBLCUSTOMER:

LAYOUT DIAGRAM - PRE-AMP BOARD_TOP VIEW

LAYOUT DIAGRAM - PRE-AMP BOARD_TOP VIEW

LAYOUT DIAGRAM - MAIN BOARD_TOP VIEW

LAYOUT DIAGRAM - PRE-AMP BOARD_BOTTOM VIEW

JBL CLUB704 SPARE PARTS LIST
Pos. No. P/N Description Usage
1 MP0101000046 LOGO 20.1*16.1*4.2MM CLUB704 1
2 ZS0301100039 DECORATIVE SHEET PC CLUB704 1
7 88LE03200402 LED PCBA CLUB704 1
11 88AM03200819 MAIN PCBA CLUB704/REF704A 1
16 MK0101000768 RCA COVER CLUB704 1
17 88FA03200421 PRE AMP PCBA CLUB704/REF704A 1
29 SG0101000072 AC SOCKET ABS CLUB704 1
30 SG0101000071 SPEAKER JACK BRACKET ABS CLUB704 2
35 MK0101400707 FUSE COVER 2PIN 24*24*0.6 CLUB704/REF704A 1
C35P, C36P 020513000218 CAP. 3300uF/35V ±20% 105ԨCLUB704/REF704A 2
C5P, C6P, C57P,
C58P 020513000385 CAP. 3300uF/25V ±20% 105ԨCLUB704/REF704A 4
CN3 130223000015 CONNECTOR P2.0MM 3PIN CLUB704/REF704A 1
D7P, D9P 040403000041 Bridge F16C20CT TO-263 CLUB704/REF704A 2
D8P, D10P 040403000040 Bridge F16A20CT TO-263 CLUB704/REF704A 2
F1 120103000008 FUSE Socket DIP 2P CLUB704/REF704A 1
JK1 120303000031 HEADPHONE JACK CLUB704/REF704A 1
JK2 121103000003 NETWORK SOCKET 8P CLUB704/REF704A 1
JK3A,JK3B,JK3C,JK 120903000132 SPEAKER JACK CLUB704/REF704A 9
JK5A,JK5B 120903000131 POWER JACK CLUB704/REF704A 2
L1P 030123000121 IND. 2.5mH ф0.7*8P*10.5Ts CLUB704/REF704A 1
Q107, Q207, Q307, 050203000168 Transistor MPSA13 TO-92 CLUB704/REF704A 4
Q108, Q208, Q308,
Q408, Q16P 050203000116 Transistor 2SD669A NPN CLUB704/REF704A 5
Q109, Q209, Q309, 050103000083 Transistor 2SB649A PNP CLUB704/REF704A 5
Q110, Q210,Q310, 050203000174 Transistor TIP35C TO-3P NPN CLUB704/REF704A 4
Q111, Q211,Q311, 050203000175 Transistor TIP36C TO-3P PNP CLUB704/REF704A 4
Q20P 050303000054 IC TSD4905S TO-263 CLUB704/REF704A 1
Q8P, Q9P, Q10P, 050403000079 IC TSD3205S TO-263 CLUB704/REF704A 5
R122, R123, R222, 010803000013 RESISTOR DIP 0.15Ω5W CLUB704/REF704A 8
RCA1 120203000085 RCA CONNECTOR CLUB704/REF704A 1
RTA, RTB, RTC, 080513000014 PTC 300~500ΩR80Ԩ＞5KΩCLUB704/REF704A 4
SW1 110103000061 SLIDE SWITCH 8P3T CLUB704/REF704A 1
SW1P 110603000028 TEMP. SWITCH 85ԨCLUB704/REF704A 1
SW2 110203000016 ROTARY SWITCH CLUB704/REF704A 1
SW2P 110603000021 TEMP. SWITCH JUC-31F CLUB704/REF704A 1
SW3, SW4 110103000062 BAND SWITCH 2P3T CLUB704/REF704A 2
T1 200403000218 TRASFO 14.4V H=23/Ф=38 CLUB704/REF704A 1
U1, U2, U3, U4, U5, 060103000654 IC NJM4580V SSOP8 CLUB704/REF704A 6
U1, U2, U3, U4, U5, 060103000654 IC NJM4580V SSOP8 CLUB704/REF704A 19
U1P 060103000383 IC TL494C SO-16 CLUB704/REF704A 1
U26 060103000469 IC HT7550 SOT-89 CLUB704/REF704A 1
U27 060103001603 IC SN8P2751P8AD SOP8 CLUB704/REF704A 1
U4P 050703000019 Photocoupler TLP185 SO8 CLUB704/REF704A 1

U5P, U6P, U7P 060103000232 IC 4560 SOP-8 CLUB704/REF704A 3
VR1, VR2 010703000363 POTENTIOMETER B20K ±10% CLUB704/REF704A 2
VR3,VR4 010703000359 POTENTIOMETER C100K ±10% CLUB704/REF704A 2
140203000050 FUSE 30A 32V CLUB704/REF704A 2
170103000914 CABLE 26AWG 3P L160MM CLUB704/REF704A 1
JD0101000022 Spring spacer φ5.6*φ3*1.3MM CLUB704/REF704A 4
121103000099 RCA SOCKET 1P CLUB704/REF704A 4
MP0501000132 LOGO 144.7*24.5*0.35mm CLUB704 1
CH0102000643 BEAUTY BOX CLUB704 1
LS0201000323 HEXAGON SCREW 55.8*4MM CLUB704/REF704A 4