Harmony CMH-1112 User manual

Model:CMH-1112

Dear Customer:
We would like to thank you for purchasing this appliance. By choosing it, you have selected the
best model of its class. The technological features, design and functions of this unit – together with
strict compliance with the highest quality standards – will provide full satisfaction for a long time.
The packing materials used for the appliance are covered by a collection, classification and
recycling system (Green Point).
Should you wish to discard them, you may use the appropriate public containers for each kind of
material.
Safety tips and precautions
-Please read these instructions carefully before using the appliance.
-Unpack the appliance completely and check that it is in full working order, since a factory
defect or possible damage caused by transportation may have happened.
When using the coffee maker for the first time
Before making coffee for the first time, run the coffee maker once with water only (without coffee
or filter).
Plug the coffee maker into the power outlet. Remove the lid from the glass carafe and fill it with
water. Use only cold water. Pour the water from the carafe into the reservoir and put the carafe (with
the lid on) back on the warm-plate. Start the coffee making process by turning on the power switch.
To make coffee
Lift the reservoir lid and fill the reservoir with cold water from the tap, depending on the number of
cups of coffee you with to prepare. The water level indicator shows the number of cups
(1cup=100ml).
Place the permanent filter in the brew basket and fill it with ground coffee. Put in 6 or 7 grams of
ground coffee per cup. To use the carafe, put it (with the lid on) on the warm-plate and position the
brew basket. Close the lid of the appliance. The pilot light will turn on, indicating that the coffee
maker is on. Once the coffee is made, it will be kept warm in the carafe as long as the coffee maker
is on. The non-drip mechanism prevents the filter from dripping after the carafe is removed or the
brew basket is tilted.
Cleaning
Always unplug the coffee maker before cleaning. To clean, wipe with a damp cloth moistened with
a few drops of detergent.
Do not immerse the appliance in water or any other liquid.
Do not place it under the tap.
The carafe may be cleaned with warm water, a washing liquid and soft brush. Do not place in the
dishwasher!
Descaling
To ensure that your coffee maker continues to make perfect coffee, you should occasionally descale
the mineral residue left by water, using a descaling product specifically formulated for coffee
makers. The frequency of this operation depends on the hardness of the water in your area and on
how often you use your coffee maker.
If you use it once or twice a day, use the following as a guide:
Soft water: every 6 months.
Mid-hard water: every 2 or 3 months.
Very hard water: every 6 or 8 weeks.

Attention!
-The mains voltage must match the rated voltage listed on the label on the base of the coffee
maker.
-Use only cold water.
-Do not allow the power cord to touch the warm-plate.
-When you want to make more coffee right away, turn the coffee maker off and let it cool down
for 5 minutes. Then fill the reservoir again with cold water.
-The coffee in the carafe will be kept warm while the coffee maker is on..
-Always unplug the coffee maker before cleaning it.
-Keep the coffee maker out of the reach of children, as they are unaware of the hazards inherent
in electrical appliances.
-To turn the coffee maker off, use the power switch. The pilot light will turn off, indicating that
the coffee maker is no longer in use.
-Your coffee maker can use either the permanent filter with which it is equipped or a paper filter)
Malfunctions and repairs
If the power connection is damaged, do not attempt to replace it yourself.
Take the appliance to an authorized Technical Service agent, since the operation could be hazardous.
The same applies for any other malfunction.

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed
of separately from your household waste. Please dispose of this equipment at your local community waste
collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic
products. Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
This product complies with the requirements of the directives
EMC-Directive: 2004 / 108 / EC
Low Voltage Directive: 2006 / 95 / EC
declare that the CMH-1112
is in compliance with the following norms:
EN 55014-1:2006
EN 55014-2:1997+A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995+A1 :2001+A2 :2005
EN 60335-2-15 :2003+A1 :2005
EN 60335-1 :2002+ A2 :2006
EN 50366 :2003+A1 :2006
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
33, Vas. Olgas avenue
P.O. 54641, Thessaloniki, Greece
Tel: [phone], Fax: [phone]
45, Akti Posidonos street
P.O. 18344, Moschato, Athens, Greece
Tel: [phone], Fax: [phone]
[e-mail]