Hasselblad X1D Mark II User manual

HASSELBLAD
X1D Mark II
Quick Start Guide
V1.0

X1D Mark II
As a medium format mirrorless digital camera, HASSELBLADTM X1D Mark II features a 43.8 × 32.9 mm CMOS sensor
with a color definition of 16 bit. Its dynamic range is 14 stops, and capable of shooting 50 MP stills. Multiple shooting
modes are supported, including single shoot, continuous shoot and interval. Its built-in 3.6”1024 × 786p touch display and
the powerful functional buttons on the camera body enable an easier way to set parameters and examine the details by
zooming in the images in real time.
X1D Mark II has built-in GPS, Bluetooth and Wi-Fi modules. By connecting the Mark II to your smart device, you can
use the Phocus Mobile 2 app to check the images and edit them. With the help of the Hasselblad’s Phocus, an image
processing software equipped with Hasselblad Nature Color Solution (HNCS) and Digital Lens Correction (DLC), the
images can reflect what your eyes see in real world, and you can even using tethered shooting to take high-resolution
images.
XCD lenses with different focal lengths and apertures are available for X1D Mark II, providing sharp and clear images.
1. On/Off Button
2. Mode Dial
3. Shutter Release Button
4. ISO/WB Button
5. AF/MF Button
6. Front Scroll Wheel
7. Camera Grip
8. Stop Down Button
9. Lens Release Button
10. Protective Cover Lid
11. Protective Cover Lid Indicator
12. Microphone
13. AF Illuminator LED
14. Flash Hot Shoe
15. Image Plane Mark
16. Strap Lug
17. SD Cards Slot Lid
18. Connectors Slot Lid
19. SD Card Slot 1
20. SD Card Slot 2
21. USB Type-C Port
22. Audio Input
23. Audio Output
24. Speaker
25. Touch Display
26. Dioptre Adjustment Dail
27. Electronic Viewfinder EVF
28. EVF Sensor
29. AE Lock Button
30. AF Drive Button
31. Browse Button
32. Soft Button
33. Star Button
34. Delete Image/Soft Button
35. Menu Button
36. Status LED
37. Rear Scroll Wheel
38. Battery

49. Battery Release Lever
40. Tripod Thread 1/4”
Downloading the User Manual and Phocus Mobile 2
Before your first use of X1D Mark II, please visit www.hasselblad.com or scan the QR code below to download the X1D
Mark II User Manual. Read and understand the whole manual for how to use this product correctly. Scan the QR code on
the right side to download Phocus Mobile 2. You may either connect your smart device with X1D Mark II using camera’s
Wi-Fi or using the USB Type-C cable. After successful connection, you can control the camera, select exposure mode,
and set shutter speed, ISO, metering mode and etc. remotely.
Download the User Manual Download Phocus Mobile 2
*iOS11.0 and later are required to download Phocus Mobile 2. Android system is not supported.
**Wi-Fi connection will be supported soon.
Using you X1D Mark II
1. Charging the Battery
The battery has been inserted into the camera body before delivery. Please fully charge the battery for the first time use.
a. Slide the Connectors Slot Lid toward the touch display to open it.
b. Connect the camera’s USB-C port with an USB power adapter using the USB type-c cable, and then connect the USB
power adapter to a power outlet (100-220 V，50-60Hz)
To remove the battery, rotate the battery release lever. The battery will move up a bit automatically. Then press the
Battery in a bit but not all the way, to release it from the camera completely. Then remove the battery.

2. Attaching a Lens
Example: XCD 45mm Lens
a. Push the lens removal button and remove protection cover lid from the camera body.
b. Rotate the lens so that the red mark on the lens lines up with the red mark on the camera body (please make sure the
lens rear cap has been detached).
c. Mount the lens into the camera body and then turn the lens clockwise to lock its position.
3. Storing Your Images
After shooting, images will be stored in the SD card inserted. When tethered shooting using Phocus, images will only be
stored in your laptop.
Storing in the SD Card
a. Slide the SD Card Slots Lid toward the screen display to open it. Then insert the SD card into SD card slot 1 or 2.
b. When inserting the SD card, make sure its side with the product tag should face toward the touch display. If it is hard to
insert the SD card, turn it around to try again. DO NOT insert the SD card forcibly.
c. Close the slot cover by rotating it counter clockwise and pushing it in place towards the front of the camera (C) to lock
it into position.

Storing in the Laptop using Phocus
a. Visit https://www.hasselblad.com/phocus/ to download and install it.
b. Slide the Connectors Cover Lid toward the screen display to open it. Then connect the camera’s USB-C port with the
laptop using the USB type-C cable. And launch the Phocus.
Phocus only supports MAC OS X 10.10 or later；PC：Windows 7（32 and 64 bit）／8 ／10 or
later.
Read Phocus User Manual to know more details about Phocus.
When connecting your camera to Phocus Mobile 2, the images will only be stored in the SD card
inserted.
4. Camera Interface
Long press on/off button to power on the camera, and you will enter the Control Screen. The information displayed on the
Control Screen differs based on your personal setting. Below is
just an example.
1. White Balance
2. Focus Mode
3. ISO
4. Battery Status
5. Wi-Fi
6. GPS
7. Shutter and Shutter Speed
8. Exposure Adjustment
9. SD Card Status

10. Captures Remaining
11. Shot Mode
12. Metering Mode
13. Exposure Mode
14. EV
15. AF Lock
16. Aperture
On Control Screen, you can tap each icon to set relevant parameter. If the value or the icon is grey, it means this
parameter cannot be changed in current mode.
Swipe up from the bottom to enter the menu page.
Camera:
Set the exposure, image quality, focus, white balance and etc.
Settings:
Set the connection, display, language, and etc.
Tap each icon to enter the sub-menu for detailed information.
Read X1D Mark II User Manual to know more detailed information.
5. Connecting to your iOS Device
Before connecting X1D Mark II to your iOS device, please make sure the Phocus Mobile 2 app has already been
downloaded and installed.
1. Connect the camera’s USB-C port with your iOS device using a Type-C to lightning cable.

2. Run the Phocus Mobile app on your iOS device, and power on the camera.
Click “Camera” on the top to check the images saved in the camera’s SD card. Tap an image to edit it (Please note only
3F images can be edited).
On the editing page:
Tap to adjust the image’s exposure, such as EV, contrast, brightness, recovery, shadow fill, and clarity.
Tap to adjust white balance, grey scale, and apply color correction.
Tap to apply lens corrections, noise filter, and adjust sharpness.
Tap to crop the image or adjust its orientation.
After the adjustment, tap “complete” on the top right corner to save this image, or save it as a copy, or export it to JPEG
format.
JPEGs cannot be edited inside this Phocus Mobile 2 app.
iOS11.0 and later are required to download Phocus Mobile 2. Phocus Mobile 2 only supports Apple
iPad series, and iPad Pro is recommended to use.
If you take stills when your iOS device is connected to the camera, the images will not be displayed
inside Phocus Mobile 2 immediately. Please disconnect the iOS device and connect again to check the
images.
Specifications
CameraType MediumFormatMirrorlessDigitalcamerawithAutofocus,Autoexposure,Autowhitebalance,
interchangeableLenses.
Construction Machinedaluminium.Tripodsocket1/4”.
SensorType CMOS,50megapixels(8272×6200pixels,5.3×5.3μm).
SensorDimensions 43.8×32.9mm
ImageSize Stills:RAW3FRcapture106MBonaverage.TIFF8bit:154MB;
FileFormat Stills:Hasselblad3FR.
ShootingMode SingleshotstillsIntervalTimerandExposureBracketing.
ColourDefinition 16bit;Dynamicrangeapproximately14stops.
ISO ISOAuto,100,200,400,800,1600.
StorageOptions TwoSDcardsortetheredtoMacorPC.SDCardscanbeusedinOverfloworBackupmode.
ColourManagement HasselbladNaturalColourSolution,HNCS.

StorageCapacity 16GBcardholds120imagesonaverage.
CaptureRate 3framespersecond
UserInterface Display:3.6inchTFTtype,24bitcolor；2.36MP；Touchfunctionality:Yes,fullsupport.Touch
interfaceincludingswipe,scrollandpinch/spreadtozoom.Cameragripwithbuttonsand
ScrollWheels.Manycamerafunctionsandsettingscanbecontrolledfromatetheredcomputer
oriPhone/iPadoverPhocusMobile2.
LiveView Oncamera,hostandiOSdevicewithhighframerate.
Viewfinder(EVF) 0.5inch，3.69MP，ultra-highresolution，widecolourrange，andfeaturessleepmode
Bluthtooth Supports5.0
GNSS GPS+GLONASS
HistogramFeedback Yes,inBrowseModeonreardisplayandinEVF.
IRFilter Mountedinfrontofsensor.
Software PhocusforMacandWindows.CompatiblewithAdobeCameraandAdobePhotoshop
Lightroom.BrandnewPhocusMobile2appsupportstoconnectthecameratoyoursmart
devicewirelyorwirelessly.
PlatformSupport Macintosh:OSXversion10.9.PC:XP/Vista/Windows7(32and64bit)/8/10.
HostConnectionType USB3.0(5Gbit/s)Type-Cconnector.
AdditionalConnections AudioIn/Out.
OperatingTemperature 10to45˚C.14to113˚F.
Wi-Fi 802.11a/g/n/ac,802.11n/acMIMOalsosupported
Dimensions Completecameraw/XCD45mmlens:148x97x125mm[WxHxD].
Weight 1170g(CompletecamerawithXCD45mmlens,Li-Ionbatteryandcard).
Lenses HasselbladXCDlenseswithbuiltinelectronicallycontrolledshutterandaperture.Automaticor
manualfocusingwithinstantmanualfocusoverride.AllHC/HCDlensesandVsystemlenses
canbeusedwithanadapter(optional).
Shutter Electronicallycontrolledlensshutterwithspeedsupto1/2000.Flashsyncatallspeeds.
OptionalElectronicshutter
ShutterSpeedRange 68minutesto1/2000secondswithXCDlenses.1/800or1/2000withHC/HCDlenses.Electronic
shutter68minto1/10000.
FlashSyncSpeed Flashcanbeusedatallshutterspeeds.
FlashControl TTLcentreweightedsystem.CompatiblewithNikonTMSystemflashes.ISOrange100to6400.
Flashoutputcanbeadjusted(-3to+3EV)forfill-inpurposesindependentofambientlight.
Syncatallshutterspeeds.
FlashCompatibility InTTL-mode,thefollowingNikonFlashproductscanbeused:SB-300,SB-500,SB-700,SB-900,
SB-910.
Focusing Automaticandmanualfocusing.Instantmanualfocusoverride.Automaticfocusingusing
contrastdetection.100%zoompossibleinmanualfocus.
ExposureMetering Spot,centreweightedandcentrespot.
Meteringrange.Spot:EV2toEV21.Centreweighted:EV1toEV21.Centrespot:EV1toEV21.
PowerSupply RechargeableLi-ionbattery(7.27VDC/3400mAh).

Compliance Information
FCC/ISEDC Compliance Notice
This device complies with Part 15 of the FCC Rules and ISEDC licence‐exempt RSS standard.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received,including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Cet appareil est conforme à la partie 15 des règles de la FCC et à la norme RSS exonérée de licence ISEDC.
L’opération est soumise aux deux conditions suivantes: (1) cet appareil ne peut pas causer d’interférences nuisibles, et (2)
cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement
indésirable.
Toute modification ou modification non expressément approuvée par la partie responsable de la conformité pourrait
annuler l’autorisation de l’utilisateur d’utiliser l’équipement.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This device(X1D MARK II; model:X1D MARK II) is compliance with SAR for un-controlled FCC and ISED exposure
limits and had been tested in accordance with the measurement methods and Procedures specified in IEEE1528 and IEC
62209, this equipment should be installed and operated with minimum distance 1 cm between the radiator and your face
when close to eye operation. And Minimum distance 20 cm between the radiator and your body when hand-held
operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Informations sur l'exposition RF
Ce dispositif (X1D MARK II; modèle X1D MARK II) est conforme aux normes SAR pour les limites d’exposition FCC
et ISED non contrôlées et a été testé conformément aux méthodes et procédures de mesure spécifiées dans IEEE1528 et
IEC 62209, cet équipement doit être installé et fonctionne avec une distance minimale de 1 cm entre le radiateur et votre
visage lorsque le fonctionnement est proche de l’œil. Et distance minimale 20 cm entre le radiateur et votre corps lors de
l’opération manuelle.
Cet appareil et son (ses) antenne (s) ne doivent pas être co-localisés ou fonctionner en conjonction avec une autre antenne
ou émetteur.