Hatteland HT C02Hx STC series User manual

Hatteland Display AS, Eikeskogvegen 52, N-5570 Aksdal, Norway
Tel: [phone] - [e-mail] - www.hatteland-display.com
User Manual HT C02
Updated: 23 Feb 2018 Doc Id: INB10042-4 (Rev 08)
Created: 363
Approved: 6987
Standard Models: HT C02Hx STC-yzz-wzzz
Entry Level Models: HT C02HI STC-yzz-wzzz
where x=CPU type, y=OS, w=Power Input (AC or DC), z=conguration
USER MANUAL
HT C02 - Compact Computer
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Entry Level Models
Standard Models

Copyright © 2018 Hatteland Display AS
Eikeskogvegen 52, N-5570 Aksdal, Norway.
All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be
copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS. Review also:
www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.pdf
The products described, or referenced, herein are copyrighted to the respective owners.
The products may not be copied or duplicated in any way. This documentation contains proprietary
information that is not to be disclosed to persons outside the user’s company without prior written consent
of Hatteland Display AS.
The copyright notice appearing above is included to provide statutory protection in the event of
unauthorized or unintentional public disclosure.
All other product names or trademarks are properties of their respective owners !
WARNING: This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Last revised 6 Jan 2015

3
IND100206-28
Contents
Contents.................................................................................... 3
Contents of package............................................................................................................... 6
General ...................................................................................... 9
About this manual................................................................................................................. 10
About Hatteland Display ....................................................................................................... 10
www.hatteland-display.com .................................................................................................. 10
Contact Information .............................................................................................................. 10
Computers introduction .........................................................................................................11
Product Labels (Examples) .................................................................................................. 12
Serial Number and Operating System (OS) license label placement ............................. 12
Installation............................................................................... 13
Installation and mounting of computers................................................................................ 14
Cables .................................................................................................................................. 14
Ferrite ................................................................................................................................... 15
Computer Upgrade Precaution Note .................................................................................... 16
General Installation Recommendations................................................................................ 17
Conguring DC power input housing connector................................................................... 17
Housing / Terminal Block Connector Overview .................................................................... 18
Cabinet cover removal.......................................................................................................... 20
Installing PCI / PCIe Card / Rework PCI Bracket Options - Notice ...................................... 21
PCI / PCIe Card removal / replacement - Introduction ......................................................... 22
PCI / PCIe Card removal / replacement - Full Lenght & Full Height..................................... 22
HT 00229OPT-A1 (PCI / PCIe Card Bracket, Removal & Replacement) HL/FH ................. 23
HT 00229OPT-A1 (PCI / PCIe Card Bracket, Removal & Replacement) HL/HH ................. 23
HT 00275OPT-A1 (PCI / PCIe Card Bracket, Removal & Replacement) HL/FL/HH............ 24
Internal Hard Drive (HDD) removal / replacement (Entry Level Models only) ...................... 25
DVD/CD Drive removal / replacement (Standard Models only)............................................ 26
Air Filter removal / replacement (H733S30Q20-SP000-0) - Alternative #1 .......................... 27
Air Filter removal / replacement (H733S30Q20-SP000-0) - Alternative #2 .......................... 28
Front Fan removal / replacement ......................................................................................... 29
Mounting Brackets for Console Mounting - HT 00226 OPT-A1............................................ 30
19 inch Rack Kit 4U - HT 00223 OPT-A1 ............................................................................. 31
Sliding Rails - HT 00224 OPT-A1 (20”) / HT 00225 OPT-A1 (26”) ....................................... 31
Replacing Internal CMOS Battery ........................................................................................ 32
Physical Connections .......................................................................................................... 34
PCI Bracket Expansion Matrix.............................................................................................. 39
Module Expansion Matrix ..................................................................................................... 42
Factory Standards ................................................................................................................ 42
Factory Preset COM Port Numbering................................................................................... 45

Contents
4
IND100206-28
Specications ......................................................................... 47
Specications - HT C02Hx STC-yzz-wzzz ........................................................................... 48
Standard Models ............................................................................................................. 48
Specications - HT C02HI STC-yzz-wzzz ............................................................................ 49
Entry Level Models.......................................................................................................... 49
Specications Factory Options............................................. 51
Specications - COM Module RS-232.................................................................................. 52
PCA100294-1.................................................................................................................. 52
Specications - NMEA / IEC COM Module RS-422 / RS-485 .............................................. 53
PCA100293-1.................................................................................................................. 53
Specications - CAN Module with CO-Processor................................................................. 56
ZIA0001310-B ................................................................................................................. 56
Specications - Isolated Digital Input/Output Module........................................................... 57
PCA100297-1.................................................................................................................. 57
Specications - LAN Module ................................................................................................ 59
PCA100298-1.................................................................................................................. 59
Specications - Isolated COM Module RS-232 .................................................................... 60
PCA100309-1.................................................................................................................. 60
Specications Accessories ................................................... 61
Specications - External Modules (USB).............................................................................. 62
Technical Drawings ................................................................ 65
Technical Drawings - HT C02Hx STC-yzz-wzzz................................................................... 66
Standard / Entry Level AC models .................................................................................. 66
Technical Drawings - Accessories........................................ 67
Technical Drawings - 19” Rack Kit 4U .................................................................................. 68
HT 00223 OPT-A1........................................................................................................... 68
Technical Drawings - Mounting Brackets.............................................................................. 70
HT 00226 OPT-A1........................................................................................................... 70
Technical Drawings - EN60945 PCI/PCIe Support Bracket.................................................. 71
HT 00275 OPT-A1........................................................................................................... 71
Technical Drawings - External Modules (USB)..................................................................... 72
Technical Drawings - 20” Slide Rails (for 19” Rack) ............................................................. 73
HT 00224 OPT-A1........................................................................................................... 73
Technical Drawings - 26” Slide Rails (for 19” Rack) ............................................................. 74
HT 00225 OPT-A1........................................................................................................... 74

Contents
5
IND100206-28
Appendixes ............................................................................. 75
BIOS - Hybrid Multi Monitor Conguration ........................................................................... 76
BIOS - On-board COM Ports Conguration ......................................................................... 78
BIOS - How to create RAID volume ..................................................................................... 81
SSD Selection Guide............................................................................................................ 85
Pinout Assignments .............................................................................................................. 88
Trouble-shooting................................................................................................................... 92
Declaration of Conformity ..................................................................................................... 93
Return Of Goods Information ............................................................................................... 94
General Terms and Conditions ............................................................................................. 95
Signal Output Combinations................................................................................................. 96
Known Deviations................................................................................................................. 97
Notes .................................................................................................................................... 98
Revision History.................................................................................................................. 100

6
IND100207-17
Item Description Illustration
TP52/TC11-1.8M
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
Note: Only applicable for factory delivered units with AC Power Input
EUR TYPE F
IEC
TP11/TC11-1.8M
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
Note: Only applicable for factory delivered units with AC Power Input
US TYPE B IEC
FCE17-E2W2SS-2N0 &
L17DPPK09JSU (cover)
1 pcs of DC Power Input housing with internal cable screw terminal.
Note: Only applicable for factory delivered units with DC Power Input
DV02-SK
1 pcs of DVI > RGB/VGA adapter
DVI 12+5P Male to DSUB 15P Female
MEDIA STD01
Documentation and Driver DVD for factory installed components like
mainboard, IDE, network etc.
Note: To use this DVD disc you will need an external USB CD/DVD drive or
provide means of getting contents copied over via USB memory stick/network
to the operating system. You can alternatively download the drivers from our
website www.hatteland-display.com
Menu browser for
Microsoft®
Windows®
Operating Systems
Contents of package
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Accessories Box Contains:
1 x TP52/TC11-1.8M (AC only)
1 x TP11/TC11-1.8M (AC only)
1 x FCE17-E2W2SS-2N0 &
1 x L17DPPK09JSU (cover)
(Only included for DC models)
1 x DV02-SK
1 x MEDIA STD01 DVD
1 x 742 712 21 Ferrite
1 x Product Declaration
1 x Computer Checklist
1 x BurnInTest Certificate
1 x HT 00226 OPT-A1
Mounting Bracket Kit
(packed inside bubble wrap)
...list continues on next page...

Contents of package
7
IND100207-17
Package may also include: (based on accessories/options ordered)
Item Description Illustration
Terminal Block Connectors
Depending on factory mounted options, connector kit as follows:
4 x 4-pin Terminal Block 3.81 for CAN Interface (ZIA0001310-B)
4 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 NMEA COM (PCA100293-1)
4 x 5-pin Terminal Block 3.81 for Digital Input/Output (PCA100297-1)
Terminal Block
Connector Kit
Depending on External Module options, connector kit as follows (incl. cover hood/cable housing):
4 x 4-pin Terminal Block 3.81 - for CAN Interface (HT 00264 OPT-A1)
+ 4 x Cover Hood (BCZ 3.81 AH04 BK BX (4-pin)
4 x 5-pin Terminal Block 3.81 - for RS-422/485 NMEA COM (HT 00262 OPT-A1)
+ 4 x Cable Housing (KGG-MC 1,5/ 5 (5-pin)
4 x 5-pin Terminal Block 3.81- for Digital Input/Output (PCA100297-1)
+ 4 x Cable Housing (KGG-MC 1,5/ 5 (5-pin)
?For computers that include 3rd party hardware; the package / accessories box may also include addi-
tional CD / HW / Information from 3rd party supplier(s).
Würth 742 712 21
(split, 10.5mm)
1 pcs - Würth 742 712 21
This ferrite is required when using 100/110/115V AC voltage on the power
supply (not required for 230V AC) to be fully compliant with type approvals.
Review installation chapter for more information.
HT 00226 OPT-A1
Mounting brackets incl. screws (for console mounting)
Test Reports papers:
1 pcs of Product Declaration
1 pcs of Computer Checklist
1 pcs of BurnInTest Certificate

8
This page left intentionally blank

9
General

10
Hatteland Display AS
IND100077-1
General
About this manual
The manual contains electrical, mechanical and input/output signal specications. All specications in this manual,
due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update
and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of
the manual.
Furthermore, for third party datasheet and user manuals, please see dedicated Documentation and Driver DVD
delivered with the product or contact our sales/technical/helpdesk personnel for support.
About Hatteland Display
Hatteland Display is the leading technology provider of specialized display and computer products, delivering high
quality, unique and customized solutions to the international maritime, naval and industrial markets.
The company represents innovation and quality to the system integrators world wide. Effective quality assurance and
investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil
tested products. Our customer oriented approach, technical knowledge and dedication to R&D, makes us a trusted
and preferred supplier of approved solutions, which are backed up by a strong service network.
www.hatteland-display.com
You will nd our website full of useful information to help you make an informed choice as to the right product for your
needs. You will nd detailed product descriptions and specications for the entire range on Displays, Computers and
Panel Computers, Military solutions as well as the range of supporting accessories. The site carries a wealth of
information regarding our product testing and approvals in addition to company contact information for our various
ofces around the world, the global service centers and the technical help desk, all ensuring the best possible
support wherever you, or your vessel, may be in the world.
Contact Information
Head ofce, Vats / Norway:
Hatteland Display AS
Eikeskogvegen 52
N-5570 Aksdal, Norway
Tel: [phone]
[e-mail]
Sales ofce, Frankfurt / Germany:
Hatteland Display GmbH
Werner Heisenberg Strasse 12,
D-63263 Neu-Isenburg, Germany
Tel: [phone]
Fax: [phone]
Sales ofce, Oslo / Norway:
Strandveien 35
N-1366 Lysaker
Norway
Tel: [phone]
Sales ofce, Aix-en-Provence / France:
Hatteland Display SAS
ACTIMART, 1140 RUE AMPERE, BP 50 196
13795 AIX-EN-PROVENCE, CEDEX 3
France
Tel: [phone]
Fax: [phone]
Sales ofce, Vista / USA:
Hatteland Display Inc
380 South Melrose Drive,
Suite 349
Vista, CA 92081
USA
Tel: [phone]
Fax: [phone]
For an up-2-date list, please visit www.hatteland-display.com/locations

11
Computers
IND101057-2
General
Computers introduction
Hatteland Display’s range of type-approved computers is designed to perform in
harsh environments while providing the performance and flexibility you expect.
We offer rack mount and black box/standalone computer solutions for every
need. Our computers are used by system integrators, boat builders and end-
users and can be found on all vessel types, all over the world.
If you are looking for a high quality computer for navigation, monitoring or
entertainment solutions, Hatteland Display can fulfil your high expectations at a
reasonable cost.
Our computer range covers all eventualities and requirements. We offer a wide
range of processor choices, HDD and power options, and solid state technology,
neatly engineered within industry standard form factors such as 19” rack mount,
2U and 4U solutions.
We continually develop our computers portfolio to make the best use of emerging
computer technology so you can be sure that your Hatteland Display computer
offers the power needed to run modern applications, with the flexibility to be
installed wherever you want, for any marine use.
Designed to perform in harsh environments...

12
Product Labels (Examples)
General
IND100240-12
Product Labels (Examples)
Serial Number Label Layout Example
Serial Number and Operating System (OS) license label placement
Only present if the unit was delivered with factory installed Operating System (OS) such as
Microsoft® Windows® Embedded Enterprise. Label size is 7cm wide x 2.8cm high. The same
Product Key is also printed on the “Product Declaration” sheet that follows the unit, check contents
of package. Note: For certain OS, there is no physical Product Key Label required or a Product Key
Number that must be entered during installation / usage of the unit.
Label Size: 6cm x 2cm. Silver background with black text
Barcode “128” (TYP+SNO)
Product Type
Input Voltages & Power Rating Manufactured Date yyyymmdd
Manufacturer & Country
Quality Control (QC) label
Quality Control (QC) Label
This label indicates that the unit is produced, tested and packed according to manufacturer’s QA
specications. It will include a Personal ID and signature by the personnell responsible for approving
the unit in production, test and warehouse departments. Label size is 3cm wide x 2.3cm high.

13
Installation

14Installation
IND100210-19
General Installation Recommendations
Installation and mounting of computers
1. Units may be intended for various methods of installation or mounting (rack mounting, panel mounting,
bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings.
2. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must
denitely be kept clear; coverings which restrict ventilation are not permissible. The product might be without
any ventilation aperatures which means pt.2 does not apply.
3. Exposure to direct sunlight can cause a considerable increase in the temperature of the unit, and might under
certain circumstances lead to overtemperature. This point should already be taken into consideration when
the bridge equipment is being planned (sun shades, distance from the windows, ventilation, etc.)
4. Space necessary for ventilation, for cable inlets, for the operating procedures and for maintenance, must be
provided.
5. To further improve the cooling of the unit we recommend installing Cooling Fans underneath blowing upwards
into the unit air inlet. This may be required in high temperature applications and also when there is reason to
expect temperature problems due to non-optimal way of mounting.
6. This Product shall be grounded to protective Earth. For AC Power cables this is done trough the ground wire
in the connector, for DC input the ground bolt shall be used. A shorter and thicker cable gives better
grounding. A 6mm² is recommended, but a 4mm² or even 2.5mm² can be used for this purpose.
7. Expose to heavy vibration and acoustic noise might under certain circumstances affect functionality and
expected lifetime. This must be considered during system assembly and installation. Mounting position must
carefully be selected to avoid any exposure of amplied vibration.
General mounting instructions
1. The useful life of the components of all Electronics Units generally decreases with increasing ambient
temperature; it is therefore advisable to install such units in air-conditioned rooms. If there are no such
facilities, these rooms must at least be dry, adequately ventilated and kept at a suitable temperature in order
to prevent the formation of condensation inside the unit.
2. With most Electronic Units, cooling takes place via the surface of the casing. The cooling must not be
impaired by partial covering of the unit or by installation of the unit in a conned cabinet.
3. In the area of the wheel house, the distance of each electronics unit from the magnetic standard compass or
the magnetic steering compass must not be less than the permitted magnetic protection distance. This
distance is measured from the centre of the magnetic system of the compass to the nearest point on the
corresponding unit concerned. The exact distance is often mentioned in the specic product specications.
4. Transportation damage, even if apparently insignicant at rst glance, must immediately be examined and be
reported to the freight carrier. The moment of setting-to-work of the equipment is too late, not only for
reporting the damage but also for the supply of replacements.
5. The classication is only valid for approved mounting brackets provided by Hatteland Display. The unit shall
be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of
mounting might require test and re-classication.
Cables
Use only high quality shielded signal cables. For RGB/DVI cables use only cables with separate coax for Red, Green
and Blue.

15
IND100210-9
General Installation Recommendations
Installation
Ferrite
The ferrite prevent high frequency electrical noise (radio frequency interference) from exiting or entering the
equipment. This ferrite is required when using 100/110/115V AC voltage on the power supply (not required
for 230V AC) to be fully compliant with type approvals.
The ferrite should be mounted (clipped in place on the cable) and
located as close as possible to the connector piece that connects to
the rear of computer.
When ready: Open the ferrite, place the cable inside as shown in
FIG1, and then gently close it until a click can be heard (FIG2). You
may close and re-open them as many times as required during the
installation.
Typenumber Ferrite Type Dimetric View Perferred distance of ferrite. Side view.
HT C02Hx STC-xxx-xxxx
HT 221Gx STC-xxx-Mxxx
1 x Würth 742 712 21 Red Line indicate 5cm [1.97 inch] limit from connector. Do not
mount ferrites (orange square) located beyond the red line!
FIG1
To computer
FIG2
To computer

16
IND100210-4
General Installation Recommendations
Installation
Computer Upgrade Precaution Note
Users who needs to open the computer to change PCI cards, install more memory, or set internal jumpers can do so
without voiding the warranty. Before opening a unit’s housing to remove or touch a board, proper ESD measurements
must be taken!
1. Operator should ground himself by using a wrist band.
2. The wrist band should be connected to ground via a ground cord.
3. A one megaohm resistor, installed in the wrist connection end of the ground cord, is a safety requirement.
4. Hatteland recommend to use an Static-dissipative ESD work mat positioned at the workplace. The 3M™ 8501
Portable Field Service Kit is a good choice for this purpose. Make sure that the mat, operator and product is wired/
grounded together.
All assisting persons who might come into contact with the endangered boards must also use the ESD equipment.
CAUTION
This unit contains electrostatic sensitive devices.
Observe precautions for handling.

17Installation
IND100078-37
General Installation Recommendations
Conguring DC power input housing connector
Note: Only applicable for DC models!
For installations that require DC power input, use the provided
2-pin DC Power Input housing with internal cable screw terminal.
1: Open the housing
2: Unmount the fasteners. (FIG 1)
3: Mount power cables to screw terminal (FIG 2). Note polarity!
4: Secure the cable tightly with fasteners (FIG 3, FIG 1)
5: Close the housing
Note: Please check polarity before connecting any cables
to the screw terminal.
Screw terminal
FIG 1
FIG 2
FIG 3
+ -
+ -
+
-

18
General Installation Recommendations
Installation
IND100210-20
Housing / Terminal Block Connector Overview
Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plugs into the
connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal
block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these
connectors, but note that warranty will be void if any damage would occur to either the unit’s original PCB terminal
socket connector or inside the unit (electronic components, boards etc.). The table below is applicable for any
Series X products, such as Display and Panel Computers, including newer type of Stand-Alone Computers.
Illustration Pins Manufacturer Details Connector used for module
If your installation require additional cable fasteners support, please use the provided Cover Hood and Cable Housing
shipped with the unit for accessories (contents of package). Illustrations below are approximate, actual Housing and
Hood may deviate slightly, but function remains the same.
5-pin Cable Housing - Illustration 4-pin Cover Hood - Illustration
KGG-MC 1,5/ 5 (5-pin) BCZ 3.81 AH04 BK BX (4-pin)
For 5-pin:
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1834372&library=usen&pcck=P-11-02-01&tab=1
For 4-pin
http://catalog.weidmueller.com/procat/Product.jsp;jsessionid=B040D5EB6832629E567C884809FDF6C1?productId=(%5b1005290000%5d)
5-pin MC 1,5/ 5-STF-3,81
Screwdriver: SZS 0,4X2,5mm
VDE, slot-headed.
Tightening torque min. 0.22 Nm.
Tightening torque max 0.25 Nm.
•RS-422 / RS-485 NMEA (PCA100293-1)
• Digital Input/Output (PCA100297-1)
Identi ed on Hatteland Display product data sheet as:
“Terminal Block 3.81”
└ Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1827732
4-pin BCZ 3.81/04/180F SN BK BX
Screwdriver: 0.4x2.5mm DIN 5264.
Tightening torque min.. 0.2 Nm.
Tightening torque max. 0.25 Nm.
•CAN Interface (ZIA0001310-B)
Identi ed on Hatteland Display product data sheet as:
“Terminal Block 3.81”
└ Reference: http://catalog.weidmueller.com/catalog/Start.do?localeId=en&ObjectID=1792970000

19
General Installation Recommendations
Installation
IND100210-20
Conguring Housing / Terminal Block connectors
Below is a brief illustration that might be useful during conguration and installation of such connectors. You will need
suitable pre-congured cable(s) and tools to congure the connector(s) and cable(s) that are present in your
installation environment. Below is a sample procedure for a 2-pin DC power connector. The procedure is the same for
other connectors of this type as listed in table above. Unit used as illustration below is for reference only.
FIG 3
FIG 1 FIG 2 FIG 4
FIG 1: Unscrew (from top) or make sure that the screw terminal (square area) are fully open, so you can secure the
inserted cables correctly to the loose housing connector (it may already be plugged into the unit as per factory
installation).
FIG 2: Insert cables* (from front) and screw / secure the cables by turning the screw on top of the housing to secure
the cables properly. Check that the cables is rmly in place and do not appear loose or falls out when pulling gently.
*Note: Required polarization verication (for instance -/+ for DC power input) should conform with the markings on
the connector area of the unit. Ignoring the markings on the unit or its add-on modules might damage the unit and/or
external equipment in which end, warranty will be void.
FIG 3: Plug the housing into the appropriate connector area of the unit (glass should be facing down) and check again
that the cables secured conforms with the markings on the connector area of the unit. Finalize the installation by
fasten the screws located in front on each side of the housing connector (FIG 4).

20
IND100210-25
General Installation Recommendations
Installation
Cabinet cover removal
Note: Areas of interest are marked in this section with arrows in RED color. Please disconnect ALL cables from the
computer unit before proceeding! Procedure applies for HT C02H, HT C02HI and HM C02HK models.
1: Unscrew 3 screws from top of cabinet.
Use a Pozidriv #2 screwdriver.
2: Unscrew 3 thumb screws in rear of cabinet. Turn anti-
clockwise using your ngers or at screwdriver (if tight).
3: Push cover gently down while pushing forward approx
10mm [0.39”] away from the front. 4: Lift the cover up with both hands.
Repeat the procedure backwards to attach the cover again.