Haybuster H-1030 Parts list manual

0500154 • May 2020
DuraTech InDusTrIes InTernaTIonal Inc.
Po Box 1940, JamesTown, nD 58402-1940
Tel: [phone]• Fax: [phone]
www.DuraTechInDusTrIes.neT • www.hayBusTer.com
H-1030
PTO Driven Tub Grinder
Operating Instructions and Parts Reference
TM
Product InformatIon

A Tradition of Innovation Since 1966

H-1030
PTO Driven Tub Grinder
Operating Instructions
and Parts Reference
TM
DuraTech Industries International Inc. (DuraTech Industries) has made every effort to
assure that this manual completely and accurately describes the operation and maintenance
of the H-1030 PTO Driven Tub Grinder as of the date of publication. DuraTech Industries
reserves the right to make updates to the machine from time to time. Even in the event of
such updates, you should still nd this manual to be appropriate for the safe operation and
maintenance of your unit.
This manual, as well as materials provided by component suppliers to DuraTech Industries
are all considered to be part of the information package. Every operator is required to read
and understand these manuals, and they should be located within easy access for periodic
review.
& are registered trademarks of Duratech Industries
International, Inc. Haybuster, H-1030 and Big Bite with logo are trademarks of Duratech
Industries International, Inc.

A Tradition of Innovation Since 1966

i
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
FOREWORD
Foreword
All personnel must read and understand the following sections before operating the
H-1030 Tub Grinder.
•Foreword and Section 1, important safety information.
•Section 2, “Machine operation,” which explains normal operation of the ma-
chine.
•Section 2.1, “Pre-Operation Inspection”.
Appropriate use of unit
The H-1030 Tilt Tub Grinder is designed to grind material into more palatable or
manageable rations for your operation. It has multiple uses:
1. Grind most types of hay
•Big round bales
•Loose hay
•Square bales
2. Grind most types of grain
•Ear corn
•Shell corn
•High moisture corn
•Most small grains

ii
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
3. Grind most types of crop residue
•Stover
•Straw
4. Grind various sizes
• Screens are available from 1/8” to 8”
• Combine screen sizes to get desired cut
Operator protection
As with all machinery, care needs to be taken in order to insure the safety of the
operator and those in the surrounding area.
WARNING: The OPERATOR IS RESPONSIBLE for the safety of the
operator and those in the surrounding area. Operators and those observing the
operation of the H-1030 Tub Grinder are required to wear head, eye, and ear
protection, No loose clothing is allowed.
TABLE OF CONTENTS

iii
TABLE OF CONTENTS
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
Part 1: Operating Instructions ........................................1
Introduction ................................................................................. 2
Purpose ....................................................................................... 2
Section 1: Safety......................................................................... 4
1.1 Safety-alert symbols.......................................................................................... 4
1.2 Operator - personal equipment.......................................................................... 6
1.3 Machine safety labels ........................................................................................ 7
1.4 Thrown objects and operator safety ................................................................ 11
1.5 Shielding.......................................................................................................... 12
1.6 Personal protection equipment ........................................................................ 12
1.7 Safety Review ................................................................................................. 13
1.8 Fire Prevention ................................................................................................ 15
1.9 Fire Extinguishers: .......................................................................................... 16
1.10 Towing .......................................................................................................... 17
1.11 Service and maintenance ............................................................................... 18
Section 2: Operation ................................................................. 19
2.1 Pre-Operating Inspection ....................................................................... 19
2.2 Introduction to the machine................................................................... 21
2.2.1 Description of the H-1130 Tub Grinder ......................................... 21
2.2.2 Overview of Operator’s Controls.................................................... 21
2.2.3A Electronic governor (For S.N. Up to 1018012030)...................... 22
2.2.3B Electronic governor (For S.N. 1020012030 & Up)...................... 27
2.2.4 Rotor................................................................................................ 33
2.2.5 Screens ............................................................................................ 34
2.2.6 Tub................................................................................................... 34
2.2.7 Slug Buster and Mill Grate ............................................................. 34
2.2.8 Conveyors, Lifting and Folding ...................................................... 35
2.2.9 Hydraulic Tilt Platform ................................................................. 35
2.3 Machine Operation ................................................................................. 36
2.3.1 Tractor Set Up ................................................................................. 36
2.3.2 How to hook up to tractor ............................................................... 37
2.3.3 How to disconnect from tractor....................................................... 37
2.3.4 How to operate machine as a unit ................................................... 38
2.4 Shutdown procedures.............................................................................. 40
2.4.1 Normal Shutdown Procedure .......................................................... 40
2.4.2 Emergency Shutdown Procedure .................................................... 40

iv
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
TABLE OF CONTENTS
2.5 Storage...................................................................................................... 40
2.5.1 Preparing for storage ....................................................................... 40
2.5.2 Removing from storage................................................................... 41
2.6 Road Transport........................................................................................ 41
2.6.1 Set up to transport ........................................................................... 41
2.6.2 Change back to operate .................................................................. 41
2.7 Raising the Tub Platform................................................................................. 42
2.8A Operation of the Electronic Governor (For S.N. Up to 1018012030)......... 43
2.8B Operation of the Electronic Governor (For S.N. 1020012130 and Up) ....... 49
2.9 Adjusting the conveyor belt tension ............................................................... 55
2.10 Adjusting the conveyor belt tracking ............................................................ 56
2.11 Adjusting tub chain tension ........................................................................... 57
2.12 Main drive belt adjustment............................................................................ 58
2.13 Sensor test ..................................................................................................... 60
2.14 Belly auger drain covers................................................................................ 60
Section 3: General Maintenance ............................................... 61
3.1 Lubrication ...................................................................................................... 62
3.2 Hydraulic system............................................................................................. 68
3.3 Screens ............................................................................................................ 69
3.4 Hammermill maintenance ............................................................................... 70
3.5 Balanced Hammer maintenance and replacement .......................................... 71
3.6 Dodge Rotor bearing installation ................................................................... 75
3.7 Cleaning the display unit................................................................................. 77
Section 4: Troubleshooting the H-1030.................................... 78
4.1 Control parameters for electronic governor................................................ 78
4.1A Monitor parameters for electronic governor..................................... 79
4.2 Fault Codes...................................................................................................... 80
4.3 General Troubleshooting ................................................................................. 81
Appendix A: Warranty ............................................................... 82
Appendix B: H-1030 Specications .......................................... 83
Appendix C: Required for operation ......................................... 84

v
TABLE OF CONTENTS
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
Part 2: Parts Reference .................................................85
MAINFRAME ASSEMBLY (FOR S.N. UP TO 1017007030) ............................. 86
MAINFRAME ASSEMBLY (FOR S.N. 1018007130 AND UP).......................... 92
BELLY SIDESHEETS ........................................................................................... 98
PLATFORM ASSEMBLY (FOR S.N. UP TO 1015001030)............................... 100
PLATFORM ASSEMBLY DETAILS (FOR S.N. UP TO 1015001030) ............. 102
PLATFORM ASSEMBLY (FOR S.N. 1016001130 AND UP) ........................... 104
PLATFORM ASSEMBLY DETAILS (FOR S.N. 1016001130 AND UP) .......... 106
BULL WHEEL ASSEMBLY .............................................................................. 108
ROTOR ASSEMBLY........................................................................................... 110
PUMP DRIVE LINE............................................................................................ 112
TUB DRIVE ASSEMBLY................................................................................... 114
TUB ASSEMBLY ................................................................................................ 116
BELLY AUGER ASSEMBLY ............................................................................. 118
LOWER DISCHARGE CONVEYOR ASSEMBLY........................................... 120
UPPER DISCHARGE CONVEYOR ASSEMBLY
(FOR S.N. UP TO 1017007030) .......................................................................... 122
UPPER DISCHARGE CONVEYOR ASSEMBLY
(FOR S.N. 1018007130 AND UP)....................................................................... 124
HYDRAULIC OIL TANK ASSEMBLY.............................................................. 126
TANDUM HYDRAULIC PUMP ........................................................................ 128
HYDRAULIC VALVE - 4000541 VIEW 1 (FOR S.N. UP TO 1018012030) .... 130
HYDRAULIC VALVE - 4000598 VIEW 2 (FOR S.N. UP TO 1018012030) .... 132
HYDRAULIC VALVE - 4000598 VIEW 1 (FOR S.N. 1020012130 AND UP) . 134
HYDRAULIC VALVE - 4000541 VIEW 2 (FOR S.N. 1020012130 AND UP) . 136
OIL TANK HYDRAULICS (FOR S.N. UP TO 1018012030) ............................ 138
OIL TANK HYDRAULICS (FOR S.N. 1020012130 AND UP)......................... 140
TANDUM PUMP HYDRAULICS ...................................................................... 142
AUX. VALVE HYDRAULICS VIEW A (FOR S.N. UP TO 1018012030) ........ 144
AUX. VALVE HYDRAULICS VIEW A (FOR S.N. 1020012130 AND UP)..... 146
AUX. VALVE HYDRAULICS VIEW B (FOR S.N. UP TO 1018012030) ........ 148
AUX. VALVE HYDRAULICS VIEW B (FOR S.N. 1020012130 AND UP)..... 150
AUX. VALVE HYDRAULICS VIEW C (FOR S.N. UP TO 1018012030) ........ 152
AUX. VALVE HYDRAULICS VIEW C (FOR S.N. 1020012130 AND UP)..... 154
TUB ROTATION HYDRAULICS (FOR S.N. UP TO 1018012030).................. 156
TUB ROTATION HYDRAULICS (FOR S.N. 1020012130 AND UP) .............. 158
TUB TILT HYDRAULICS (FOR S.N. UP TO 1018012030) ............................. 160
TUB TILT HYDRAULICS (FOR S.N. 1020012130 AND UP).......................... 162
BELLY AUGER HYDRAULICS VIEW A ......................................................... 164
BELLY AUGER HYDRAULICS VIEW B ......................................................... 165

vi
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
BELLY AUGER HYDRAULICS ........................................................................ 167
CONVEYOR LIFT AND FOLD CYLINDER HYDRAULICS ......................... 168
CONVEYOR FLOW CONTROL VALVE HYDRAULICS ............................... 170
DISCHARGE CONVEYOR ORBIT MOTOR HYDRAULICS......................... 172
PRESSURE GAUGES HYDRAULICS (FOR S.N. UP TO 1018012030) ......... 174
PRESSURE GAUGES HYDRAULICS (FOR S.N. 1020012130 AND UP) ...... 176
PRESSURE GAUGES HYDRAULICS (FOR S.N. 1020012130 AND UP) ...... 177
JACK SHAFT & BULL WHEEL GREASE LINES ........................................... 179
ROTOR & BELLY CONVEYOR GREASE LINES........................................... 180
WHEELS AND HUBS......................................................................................... 182
ORBIT MOTOR................................................................................................... 184
3600833 DRIVE LINE ASSEMBLY................................................................... 186
3600831 PTO ASSEMBLY.................................................................................. 188
3600832 PTO ASSEMBLY.................................................................................. 189
PRESSURE ROLLER ASSEMBLY.................................................................... 190
TUB ROLLER BEARING ASSEMBLY............................................................. 191
HYDRAULIC CYLINDER SEALS AND OTHER ITEMS ............................... 192
MILL GRATE - 5 BAR - 2-1/4 (FOR S.N. UP TO 1018012030) ....................... 194
MILL GRATE - 5 BAR - 2-1/4 (FOR S.N. 1020012130 AND UP).................... 196
ELECTRICAL PARTS (FOR S.N. UP TO 1018012030) .................................... 198
ELECTRICAL PARTS (FOR S.N. 1020012130 AND UP)................................ 200
GRAIN HOPPER (OPTION)............................................................................... 202
EAR CORN KIT (OPTION)................................................................................ 206
GEYSER PLATE (OPTION)............................................................................... 208
MATERIAL GUIDE ASSEMBLY (OPTION) .................................................... 210
5701182 RADIO HARNESS (OPTION)............................................................. 213
DECALS .............................................................................................................. 214
DECAL LOCATIONS ......................................................................................... 216
H-1030 TUB GRINDER DOCUMENTATION COMMENT FORM .. 221
APPENDIX A FOLDOUTS .......................................................... 223
5701061 - H-1030 MACHINE HARNESS (for S.N. Up to 1018012030) ........FO-1
5701174 - H-1030 MACHINE HARNESS (for S.N. 1020012130 and up) ......FO-2
5701170-PTO Tub Tail lights harness (for S.N. 1020012130 and up)...............FO-3
TABLE OF CONTENTS

1
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
H-1030
PTO Driven Tub Grinder
Part 1: Operating Instructions
TM

2H-1030 TUB GRINDER OPERATING INSTRUCTIONS
Introduction
The H-1030 Tub Grinder is designed to grind material into more palatable or manageable rations for your operation. It
has multiple uses:
1. Grind most types of hay
•Big round bales
•Loose hay
•Square bales
2. Grind most types of grain
•Ear corn
•Shell corn
•High moisture corn
•Most small grains
3. Grind most types of crop residue
•Stover
•Straw
4. Grind various sizes
• Screens are available from 1/8” to 8”
• Combine screen sizes to get desired cut
To avoid possible damage to the machine and risk of injury to the operator, consult with a DuraTech Industries
International, Inc. (DuraTech Industries) representative before attempting to shred materials other than livestock forage.
Purpose
The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most
efcient operation of your H-1030 Tub Grinder. There is also a trouble shooting section that may help in case of
problems in the eld. Any information not covered in this manual may be obtained from your dealer.
Special Note: When reference is made as to front, rear, left hand, or right hand of this machine, the
reference is always made from standing at the rear end of the machine and looking toward the hitch.
Always use serial number and model number when referring to parts or problems. Please obtain your
serial number and write it below for your future reference.
MODEL: H-1030 SERIAL NO. ________________________

3
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
How to use this manual
Manual organization
This manual is organized into the following parts:
• Part 1: Operating Instructions
• Section 1: Safety decals, safety instructions and information
• Section 2: Describes the purposes of each part, and safe operating procedures.
• Section 3: Describes how to maintain the H-1030 Tub Grinder.
• Section 4: Describes how to trouble shoot problems with the H-1030 Tub Grinder.
• Part 2: Part’s reference contains diagrams of each assembly, with the part number of each part. A key on
the same or facing page contains a description of the part and the quantity used.
Dealer responsibilities
• Perform a daily pre-operation inspection as described in Section 2, “Operation.”
•Upon delivery of the unit to the customer, it is your responsibility to conduct a training session on the safe
operation of the unit for the primary operator(s). You must also conduct a “walk-around” inspection of all
safety instructional decals on the machine itself. Decals are illustrated in Part 2: Parts Reference.
•Complete and return the Warranty Registration postcard. DuraTech Industries must receive this form
before activating the warranty. Appendix A provides details of the warranty.
Operator responsibilities
• Note the important safety information in the Foreword and in Section 1, “Safety.”
•Thoroughly review sections 1 and 2, which explain normal operation of the machine, and section 3, which
explains maintenance requirements. These sections will function as your textbook during the dealer -
conducted training course that is required before you can use the unit.
•Manuals for certain allied supplier’s components are provided separately. You should also be familiar
with their contents.
•Keep copies of all manuals in a readily accessible location for future reference.

4H-1030 TUB GRINDER OPERATING INSTRUCTIONS
Safety-Alert Symbol
Read and recognize safety information. Be alert to
the potential for personal injury when you see this
safety-alert symbol.
Section 1: Safety
The safety of the operator is of great importance to DuraTech Industries/Haybuster. We have provided decals, shield
and other safety features to aid you in using your machine safely. In addition, we ask you to be a careful operator who
will properly use and service your Haybuster equipment.
WARNING: FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS THAT FOLLOW
WITHIN THIS MANUAL COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH.
BEFORE ATTEMPTING TO OPERATE THIS MACHINE, CAREFULLY READ ALL
INSTRUCTIONS CONTAINED WITHIN THIS MANUAL. ALSO READ THE INSTRUCTION
MANUAL PROVIDED WITH YOUR TRACTOR.
THIS MACHINE IS NOT TO BE USED FOR ANY PURPOSE OTHER THAN THOSE
EXPLAINED IN THE OPERATOR’S MANUAL, ADVERTISING LITERATURE OR OTHER
DURATECH INDUSTRIES WRITTEN MATERIAL PERTAINING TO THE
H-1030 TUB GRINDER.
1.1 Safety-alert symbols
Decals are illustrated in Part 2: Parts Reference.
The safety decals located on your machine contain important and useful information that will help you operate your
equipment safely.
To assure that all decals remain in place and in good condition, follow the instructions below:
• Keep decals clean. Use soap and water - not mineral spirits, adhesive cleaners and other similar cleaners
that will damage the decal.
• Replace all damaged or missing decals. When attaching decals, surface temperature of the machine must
be at least 40° F (5° C). The surface must be also be clean and dry.
• When replacing a machine component to which a decal is attached, be sure to also replace the decal.
• Replacement decals can be purchased from your Haybuster dealer.
DuraTech Industries uses industry accepted ISO/ANSI standards in labeling its products for safety and operational
characteristics.

5
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
DANGER: Indicates an imminently
hazardous situation that, if not avoided, will
result in death or serious injury. This signal
word is to be limited to the most extreme
situations, typically for machine components
that, for functional purposes, cannot be
guarded.
WARNING: Indicates a potentially hazardous
situation that, if not avoided, could result in
death or serious injury, and includes hazards
that are exposed when guards are removed.
It may also be used to alert against unsafe
practices.
CAUTION: Indicates a potentially hazardous
situation that, if not avoided, may result in
minor or moderate injury. It may also be used
to alert against unsafe practices.
DANGER
INFORMATION
CAUTION
WARNING
This manual uses the symbols to the right to denote
important safety instructions and information.
The DANGER, WARNING and CAUTION symbols
are used to denote conditions as stated in the text above.
Furthermore, the text dealing with these situations is
surrounded by a box with a white background, will begin
with DANGER, WARNING, or CAUTION.
The INFORMATION symbol is used to denote important
information or notes in regards to maintenance and use of
the machine. The text for this information is surrounded
by a box with a light grey background, and will begin with
either IMPORTANT or NOTE.

6H-1030 TUB GRINDER OPERATING INSTRUCTIONS
1.2 Operator - personal equipment
THE OPERATOR
Physical Condition
You must be in good physical condition and mental health and not under the inuence of any substance (drugs, alcohol)
which might impair vision, dexterity or judgment.
Do not operate a H-1030 when you are fatigued. Be alert - If you get tired while operating your H-1030, take a break.
Fatigue may result in loss of control. Working with any farm equipment can be strenuous. If you have any condition
that might be aggravated by strenuous work, check with your doctor before operating
Proper Clothing
Clothing must be sturdy and snug-tting, but allow complete freedom
of movement. Avoid loosetting jackets, scarfs, neckties, jewelry, ared
or cuffed pants, unconned long hair or anything that could become
entangled with the machine.
Protect your hands with gloves when handling hammers, screens, etc.. .
Heavy-duty, nonslip gloves improve your grip and protect your hands.
Good footing is most important. Wear sturdy boots with nonslip soles.
Steel-toed safety boots are recommended.
To reduce the risk of injury to your eyes never operate a H-1030 unless
wearing goggles or properly tted safety glasses with adequate top and
side protection.
Tractor noise may damage your hearing. Always wear sound barriers (ear
plugs or ear mufers) to protect your hearing. Continual and regular users
should have their hearing checked regularly.
Protect your head with a hard hat to reduce the risk of injury from ying
debris.

7
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
6500040
1.3 Machine safety labels
The safety decals located on your machine contain important information that will help you operate your equipment.
Become familiar with the decals and their locations.
DANGER: ROTATING PARTS WITHIN CAN KILL OR
DISMEMBER. WAIT FOR ALL MOVEMENT TO STOP
BEFORE SERVICING, UNLOADING, OR INSPECTING
MACHINE.
DANGER: ROTATING DRIVELINE, CONTACT CAN
CAUSE DEATH, KEEP AWAY!
DO NOT OPERATE WITHOUT
• ALL DRIVELINE GUARDS, TRACTOR AND
EQUIPMENT SHIELDS IN PLACE
• DRIVELINES SECURELY ATTACHED AT BOTH
ENDS
• DRIVELINE GUARDS THAT TURN FREELY ON
DRIVELINE
DANGER: OBJECTS THROWN BY MACHINE
DO NOT OPERATE WITHOUT WEARING SAFETY
GLASSES AND A HARD HAT.
KEEP UNAUTHORIZED PERSONNEL OUT OF THE
GRINDING AREA
WARNING: FOR YOUR PROTECTION KEEP ALL
SHIELDS IN PLACE AND SECURED WHILE MACHINE
IS OPERATING MOVING PARTS WITHIN CAN CAUSE
SEVERE PERSONAL INJURY.
6500085
6500082
6500118

8H-1030 TUB GRINDER OPERATING INSTRUCTIONS
6500043
6500209
WARNING: FOR YOUR PROTECTION AND
PROTECTION OF OTHERS, PRACTICE THE
FOLLOWING SAFETY RULES.
1. BEFORE OPERATING THIS MACHINE, READ THE
OPERATOR’S MANUALS SUPPLIED WITH THIS
MACHINE AND YOUR TRACTOR.
2. CHECK OPERATORS MANUALS TO BE SURE
YOUR TRACTOR MEETS THE MINIMUM
REQUIREMENTS FOR THIS MACHINE.
3. READ ALL DECALS PLACED ON THIS MACHINE
FOR YOUR SAFETY AND CONVENIENCE.
4. NEVER ALLOW RIDERS ON THIS IMPLEMENT OR
THE TRACTOR.
5. KEEP OTHERS AWAY FROM THIS MACHINE
WHILE IN OPERATION.
6. KEEP ALL SHIELDS IN PLACE WHILE MACHINE IS
OPERATING.
7. KEEP HANDS, FEET, LOOSE CLOTHING, ETC.,
AWAY FROM POWER DRIVEN PARTS.
8. ALWAYS SHUT OFF MACHINE AND ENGINE
BEFORE SERVICING, UNCLOGGING,
INSPECTING, OR WORKING NEAR THIS MACHINE
FOR ANY REASON. ALWAYS PLACE
TRANSMISSION IN PARK OR SET PARK BRAKE
AND WAIT FOR ALL MOVEMENT TO STOP
BEFORE APPROACHING THIS MACHINE.
WARNING: NO RIDERS
SERIOUS INJURY COULD RESULT FROM RIDING ON
THE MACHINE.
WARNING: THROWN OBJECT HAZARD
TO PREVENT SERIOUS INJURY OR DEATH DO NOT
RAISE TUB WHEN ROTOR IS TURNING.
1. DISENGAGE ROTOR AND ALLOW TO COME TO A
COMPLETE STOP.
2. BE CERTAIN THAT ALL PERSONNEL ARE CLEAR
OF MACHINERY AREA.
3. RAISE TUB TO FULL VERTICAL POSITION.
4. STOP ENGINE AND REMOVE KEY BEFORE
APPROACHING TUB AND ROTOR AREA.
6500041

9
H-1030 TUB GRINDER OPERATING INSTRUCTIONS
6500282
6500283
WARNING: OVERHEAD CONVEYOR HAZARD
TO PREVENT SERIOUS INJURY OR DEATH:
DO NOT WALK UNDER CONVEYOR AT ANY TIME.
STAY CLEAR OF CONVEYOR DURING OPERATION,
RAISING, AND LOWERING. LOWER CONVEYOR
FULLY BEFORE SERVICING.
KEEP OTHERS AWAY.
WARNING: HIGH-PRESSURE FLUID HAZARD, TO
PREVENT SERIOUS INJURY OR DEATH:
• RELIEVE PRESSURE ON SYSTEM BEFORE
REPAIRING OR ADJUSTING OR DISCONNECTING.
• WEAR PROPER HAND AND EYE PROTECTION
WHEN SEARCHING FOR LEAKS. USE WOOD OR
CARDBOARD INSTEAD OF HANDS.
• KEEP ALL COMPONENTS IN GOOD REPAIR.
WARNING: TIPPING HAZARD
TO PREVENT SERIOUS INJURY OR DEATH
1. DO NOT Tilt WITH MATERIAL IN TUB.
2.. DO NOT Tilt ON SLOPED GROUND.
3. DO NOT Tilt ON SOFT GROUND.
4. DO NOT USE OTHER EQUIPMENT TO ASSIST
Tilt.
WARNING: TO PREVENT SERIOUS INJURY OR
DEATH DURING OPERATION:
1. DO NOT OVERFILL THE TUB.
2. DO NOT APPROACH THE GRINDER OR MAKE
MACHINE ADJUSTMENTS WHILE IT IS BEING
LOADED.
6500214
6500220
6500339
WARNING: PINCH POINT STAY BACK

10 H-1030 TUB GRINDER OPERATING INSTRUCTIONS
6500440
CAUTION: ADJUST TRACTOR DRAWBAR SO THAT
THE
DISTANCE FROM THE END OF THE PTO SHAFT ON
THE TRACTOR TO THE CENTER OF THE DRAWBAR
HITCH PIN IS EQUAL TO THE DISTANCE SHOWN
IN DIAGRAM. SEE OWNER’S MANUAL FOR MORE
INFORMATION.
WARNING: Noise hazzard.
Ear protection required.
6500489
6500497
CAUTION: Do not operate machine unless an approved
re extingisher is installed.