HDL Prism Lite Series User manual

Prism Lite Series Touch Panel
User Manual
(Applicable for HDL-MPTF02.48/46,
HDL-MPTF04.48/46, HDL-MPTF06.48/46)
Version: 1.0.0
Published on Nov. 06, 2019

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com i
Content
Legal Statement...............................................................................................................................I
Update History................................................................................................................................II
1Introduction................................................................................................................................1
2Basic Setting..............................................................................................................................3
3Button Setting............................................................................................................................5
3.1 Button Mode Setting............................................................................................................5
3.2 Button Status Setting...........................................................................................................5
3.3 Target Setting......................................................................................................................6
4Button Status Color Setting........................................................................................................9
4.1 Button Status Color Setting...............................................................................................10
4.2 White Balance Adjustment ................................................................................................10
5Sleep Group Setting ................................................................................................................11

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com I
Legal Statement
HDL has all the intellectual property rights to this document and contents thereof.
Reproduction or distribution for third parties are prohibited without written authorization from
HDL. Any infringement of HDL’s intellectual property rights will be investigated the legal
liability.
The contents of this document will be updated as the updates of product versions or
other reasons. Unless otherwise agreed upon, this document is to be used as a guidance
only. All the statements, information and recommendations in this document makes no
warranty expressed or implied.
HDLAutomation Co., Ltd.

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com II
Update History
The form below contains the information of every update. The latest version contains all the
updates of all former versions.
No. Version Update Information Date
1 V1.0.0 Initial release Nov. 06, 2019

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 1
1 Introduction
Prism Lite Series Touch Panel (hereinafter referred to as Prism Panel) is specially designed
for home automation to control smart devices, and EU standard and US standard are
available.
This user manual takes US standard 6-button panel as an example to introduce the
configuration process of Prism Panel in Buspro Setup Tool 2. The devices include:
Prism Lite Series Touch Panel
A computer with Buspro Setup Tool 2
1-Port Programming Gateway (HDL-MBUS01IP.431) connected to the router
Dedicated Buspro cable(s)
Notice:
①Please refer to the datasheet attached to the product for the information of installation,
wiring, specifications, etc.
②The pictures in this user manual are for reference only. The actual product should prevail.
③The Button ID in this user manual is shown as Figure 1-1.
Figure 1-1 Button ID (Top: EU, Bottom: US)

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 2
How to Enter Configuration Page?
1. Connect the panel to the system, and open Buspro Setup Tool 2 in the computer.
2. Click “Fast Search”.
3. Double click the “Model” or “Description” column to enter configuration page, as shown
in Figure 1-2, Figure 1-3.
Figure 1-2 How to enter configuration page
Figure 1-3 Configuration page

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 3
2 Basic Setting
Click “Basic Information” in configuration page, as shown in Figure 2-1. This page includes
the following setting options:
①Indicator Intensity: includes status indicator (button indicator) brightness adjustment.
②Press time setting: includes the time setting of long press.
Long Press: Keep pressing the button longer than the time period, and the system
will identify as “Long Press”. The range is from 0.3s to 25s.
③Min. dimming value setting: means the minimum dimming value. The light brightness will
not fall under this value during dimming operation.
④Analog information setting: to enable/disable timing analog broadcast, or read panel
voltage.
⑤Broadcast temperature: Built-in temperature probe in Tile Panel enables temperature
detection. The temperature data can be broadcast to corresponding device if the Subnet
ID and Device ID is set. The temperature data can be adjusted with the slider.
⑥Standby display and page setting:
Always ON: enable keeping the panel on
Eco mode: to enable the panel to enter eco mode automatically. If enabled, the delay
time and indicator standby brightness can be set behind.
Proximity sensor enable: to enable the proximity sensor of Prism Panel
Click sound: to enable button sound
Proximity sensor trigger key: to trigger target when the panel senses human body.
Proximity sensor sensitivity: to set the sensitivity ofproximity sensor, and higher value
means the sensor is more sensitive.

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 4
Figure 2-1 Basic information setting

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 5
3 Button Setting
“Button Setting”page will be opened bydefault in configuration page, as shown in Figure 3-1.
Figure 3-1 Button setting
3.1 Button Mode Setting
User may set button mode and button button remarks on the left of Button Setting page.
3.2 Button Status Setting
Click “Button Status” button to open Button Status window, as shown in Figure 3-2. This page
includes the following setting options:
①Status indicator: to enable/disable the status indicator of this button.
②Dimming: to enable/disable the dimming function of this button.
③Dimming value:if enabled, the panel maymemorize thedimming status of the lights when

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 6
the light is turned off, and recall the status when turned on next time.
④Mutual: only available when “Combination ON”, “Combination OFF” or “Combination
ON/OFF” is selected. The ON/OFF status of the selected buttons are mutually exclusive.
(Only one group of exclusive relationships is available in Prism Panel.)
⑤Linkage: only available when “Single ON”, “Single OFF” or “Single ON/OFF” is selected.
Enter the button ID to link 2 buttons together for controlling one same target. The target
of the button with the smaller ID should prevail, while 0 means no button is linked to this
button.
Figure 3-2 Button status setting
3.3 Target Setting
Select the button for target configuration on the left, and click “Target” button on the right to
open “Target” window, as shown in Figure 3-3.
Notice:
The number of the target depends on the button mode, Only one target is supported except
“Combination ON”, “Combination OFF”, “Combination ON/OFF“, “Double click/combined”,
“Short/long press”, “Short press/long jog”.

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 7
Figure 3-3 Button target configuration
If the button supports two or more targets, users can add targets. This part takes “adding two
more targets to the long press mode of Button 1” as an example.
1. Set the mode of Button 1 to “Short/Long press” on the left of button configuration page.
2. Select Button 1, and click “Target” to open target configuration window.
3. Select “Long Press” in button status type (Mark ②of Figure 3-3).
4. The total target number will be 3 if 2 more targets is to be added as there’s 1 target by
default. Thus, enter “from 1 to 3” in “Input target number”, and click “Read” button.
5. Then there will be 3 targets in the target list below.
6. Clickthetargetintargetlist,andedititsSubnetID,DeviceID,Type,andotherparameters
(according to the selection of Type). Click “Save” to save changes.
Notice: About “Target Creation”
“Target Creation” provides a more convenient way to add target(s) to the button. Its function
is similar to creating scenes and add it to the button in order for the button to control the
targets.
The following ways can be followed to enter “Target Creation”:
①Click “Targets” → “Targets Templates” in the main page of Buspro Setup Tool 2.
②Click “Button Settings” → “Targets” → “Targets create”.

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 8
The following 4 areas are included in this page, as shown in Figure 3-4:
①Device list: includes the devices that have been searched in Buspro Setup Tool.
②Device button list: shows the buttons of the device, and device can be selected above.
③Template list
④Template target list: includes the targets of current template.
Figure 3-4 Target creation
To edit template, select the template in ③and edit in ④. “Template” is only for saving the
targets temporarily in order for editing and is not assigned to any button.
User may add the target to the button in the following 2 ways:
①Drag the device in ①(red part) to corresponding button in ②(red part).
②Select the targets in ④(multi-selection with Shift/Ctrl supported), right click and select
“Copy selected row”. Return to Button Target Configuration Page (Figure 3-3) and right
click on target list and select “Paste”, then click “Save”.

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 9
4 Button Status Color Setting
Click “Others” in configuration page, as shown in Figure 4-1. Color Setting includes the
following 2 setting options:
①Button status color setting
②White balance adjust
Figure 4-1 Color setting

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 10
4.1 Button Status Color Setting
One button may be set with different color according to its status. On color, off color and
sensitivity are included in this setting area:
1. On color: the indicator color when the target is on
2. Off color: the indicator color when the target is off
3. Sensitivity: to set the button sensitivity (it is recommended to keep the value by default).
4.2 White Balance Adjustment
If the indicator color is not accurate, please set the button indicator color to white in “Button
status color setting”, and edit the RGB value (from 0 to 100) in “White Balance Adjustment”
to adjust white color, in order for correcting indicator color.

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 11
5 Sleep Group Setting
This panel has two status: Sleep and Standby
Sleep: triggered by command, and the panel will enter sleep mode (similar to pressing
the power button for the mobile phone to enter sleep mode)
Standby: in a set period of time after last operation, the system enters standby mode
automatically (similar to the mobile phone entering standby mode with no operation for a
short period of time)
“Sleep Group” refers to the following situation: if one panel is woke up from sleep/standby
mode, other panels in the same sleep group will be woke up as well. Through configuration,
one panel can send command for all the panelsin the same sleep group to entersleep mode.
Despite that the standby status of the panels in the same sleep group stays independent.
Click “Sleep Group Setting” in configuration page, as shown in Figure 5-1.
Figure 5-1 Sleep group configuration

Prism Lite Series Touch Panel User Manual
HDLAutomation Co., Ltd.
http://www.hdlautomation.com 12
Check “Enable” to enable the sleep group function of the panel, otherwise the panel stays
independent in the system and its sleep status does not affect other panels.
Add the panel to the corresponding sleep group by selecting “Enable”. The system has 32
sleep groups by default. Select “Enable” to add the panel to the corresponding sleep group,
and when the panel is woke up, other panels in the sleep group will also be waken up.