HDL Prism Pro User manual

Prism Pro/Multi-function Touch Panel
User Manual
(Applicable model: HDL-MPTFL11.46)
Version: V1.0.0
Published on Nov.22, 2019

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com i
Content
Legal Statement...............................................................................................................................I
Update History................................................................................................................................II
1Introduction................................................................................................................................1
2Panel Setting.............................................................................................................................3
2.1 Button Page Display Setting................................................................................................4
2.2 Return Standby Page Setting..............................................................................................5
2.3 Temperature Feedback Setting...........................................................................................6
2.4 Proximity Sensor Setting.....................................................................................................7
2.5 Indicator Intensity Setting....................................................................................................8
2.6 Other Settings (Button Valid Status)....................................................................................9
2.7 Time and Date Setting.......................................................................................................11
3Button Setting..........................................................................................................................12
3.1 Button Objects Setting.......................................................................................................12
3.1.1 Add Objects................................................................................................................13
3.1.2 Edit Objects................................................................................................................13
3.2 Button Status Setting.........................................................................................................13
4AC Setting...............................................................................................................................15
4.1 General Setting.................................................................................................................15
4.2 Test...................................................................................................................................16
4.3 Other Function Setting ......................................................................................................16
4.3.1 AC Setting..................................................................................................................16
4.3.1.1 Temperature Model Setting..................................................................................16
4.3.1.2 AC Temperature Range Setting ...........................................................................17
4.3.1.3 Temperature Sensor Setting ................................................................................18
4.3.2 IR Codes Setting ........................................................................................................18
4.3.3 Slave & Sync (Invalid for Slave)..................................................................................19

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com ii
5Floor Heating Setting...............................................................................................................21
6Music Setting...........................................................................................................................24
7LED Setting .............................................................................................................................26
7.1 LED Color & Shortcuts Setting ..........................................................................................26
7.2 LED White Balance Adjustment.........................................................................................27
8Sleep Group Setting ................................................................................................................28

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com I
Legal Statement
HDL has all the intellectual property rights to this document and contents thereof.
Reproduction or distribution for third parties are prohibited without written authorization from
HDL. Any infringement of HDL’s intellectual property rights will be investigated the legal
liability.
The contents of this document will be updated as the updates of product versions or
other reasons. Unless otherwise agreed upon, this document is to be used as a guidance
only. All the statements, information and recommendations in this document makes no
warranty expressed or implied.
HDL Automation Co., Ltd.

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com II
Update History
The form below contains the information of every update. The latest version contains all the
updates of all former versions.
No.
Version
Update Information
Date
1
V1.0.0
Initial release
Nov.22, 2019

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 1
1 Introduction
Prism Pro/Multi-function Touch Panel (Model: HDL-MPTFL11.46, hereinafter referred to as
Prism Pro) is specially designed for high-end intelligent home automation. It can realize the
control of lighting, curtain, scene, music, air conditioner, floor heating, etc. In addition, it can
be woken by presence detection.
This user manual offers the information on the configuration of Prism Pro in Buspro Setup
Tool 2. The following tools might be included:
➢Prism Pro/Multi-function Touch Panel (Model: HDL-MPTFL11.46)
➢Panel Power Interface (Model: HDL-MPLPI.46-A)
➢A computer with Buspro Setup Tool 2
➢1-Port Programming Gate Way connected to the router
➢Dedicated Buspro Cable(s)
Note:
①Please refer to the datasheet attached to the product for the information of installation,
wiring, specifications, etc.
②The pictures in this user manual are for reference only and the actual product should
prevail.
③Panel button introduction is as shown in Figure 1-1 (The six buttons under the panel
respectively correspond to the six icons of each button page).

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 2
Figure 1-1 Panel button introduction
➢Open Configuration Page
①Connect the panel to the system and open Buspro Setup Tool 2 in the computer.
②Click “Fast Search” to search for the devices.
③Double click the “Model” or “Description” column to enter panel configuration page, as
shown in Figure 1-2.
Figure 1-2 Open panel configuration page

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 3
2 Panel Setting
Default panel setting page appears as shown in Figure 2-1. The setting items include:
①Button page settings: to display/hide corresponding button pages.
②Return standby page: the panel can be set to return to a specific page after a period of
time with no operation.
③Temperature feedback: to enable broadcasting temperature.
④Proximity sensor: to enable human body detection.
⑤Indicator intensity: to set panel backlight and button indicator brightness.
⑥Others: includes the time setting of long press and double click, the language selection
and the minimum dimming value.
⑦Time and date: to select time type and date format.
Figure 2-1 Panel setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 4
2.1 Button Page Display Setting
In “Button page settings” part (as shown in Figure 2-2), user may select/deselect
corresponding button page to display/hide.
Note: user should at least display a button page instead of hiding all.
Figure 2-2 Button page setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 5
2.2 Return Standby Page Setting
In “Return standby page” setting part (as shown in Figure 2-3), the panel can be set to return
to a specific page after a period of time with no operation.
1. Don’t return: the panel stays in the current page after a period of time with no operation.
2. Return to page* delay *s: to set return page number and delay time after a period of time
with no operation. For example, when “return to page 2 delay 20s” is set, the panel will
return to button page 2 after a period of time with no operation for 20s.
Figure 2-3 Return standby page setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 6
2.3 Temperature Feedback Setting
After Prism Pro detects temperature via built-in temperature sensor, temperature
broadcasting can be enabled/disabled in “Temperature feedback” setting part (as shown in
Figure 2-4).
1. Broadcast: to enable/disable temperature broadcasting.
2. Subnet/Device ID: to set device information for receiving temperature data.
3. Type: to select temperature unit, including C (℃) and F (℉).
Figure 2-4 Temperature feedback setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 7
2.4 Proximity Sensor Setting
In “Proximity sensor” setting part (as shown in Figure 2-5), user may set proximity sensor.
1. Proximity sensor enable: to enable proximity sensor, namely the panel will be woken up
by detecting human body.
2. Click sound: to enable the click sound of corresponding button.
3. Proximity sensor trigger key: to select the button triggered after the panel detects human
body, which ranges from 1 to 36.
4. Proximity sensor sensitivity: higher sensitivity means longer distance for the panel to
detect human body.
Figure 2-5 Proximity sensor setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 8
2.5 Indicator Intensity Setting
In “Indicator intensity” setting part (as shown in Figure 2-6), user may set indicator brightness.
1. LCD backlight: to set panel backlight brightness.
2. Button LED: to set button indicator brightness.
3. Always ON: after selecting the option, the panel will be in working mode all the time,
whose panel backlight and button indicator brightness are the set value.
4. Eco mode: after a period of time with no operation, panel backlight and button indicator
brightness will be automatically the set value.
➢Delay (10s-99s): to set the delay time between no operation and enabling eco mode.
➢Standby level: to set panel backlight brightness in standby mode.
➢Trigger button when LCD wake up: when the panel is in eco mode, if the option is
selected, button will be triggered when the panel is woken up. If the option is
deselected, the first press is to wake up panel while the second press is to trigger
button object.
➢Status light standby brightness: to set button indicator brightness in standby mode.
Figure 2-6 Indicator intensity setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 9
2.6 Other Settings (Button Valid Status)
In “Others” setting part (as shown in Figure 2-7), user may set button valid status.
Figure 2-7 Others setting (button valid status)
The setting items are explained below:
1. Long press time (0.3s-25s): to set the time of long press, which ranges from 0.3s to 25s.
When the button is pressed longer than the set time, the object will be triggered.
2. Double click time (0.1s-2s): to set the time of double click, which ranges from 0.1s to 2s.
The time interval between two clicks shorter than the set time will be identified as “Double
click” to trigger objects.
3. Choose language: user may select Chinese, English or customized language (please
refer to "Customized Language Setting”).
4. Min. dimming value: to set the minimum dimming value, which ranges from 0 to 50%. For
example, when the minimum dimming value is set to 20%, after object brightness is
lowered to 20%, it is invalid to lower object brightness again.

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 10
➢Customized Language Setting
User may customize language by uploading premade icons to replace default panel icons,
as shown in Figure 2-8.
①Click “Apply” button in Buspro Setup Tool 2
②Select “Image” label
③Select object icon in “Choose icon type” (This part takes “Button page 2 icon” as an
example)
④Select “Customize” in “Choose language”
⑤Double click “Picture” column corresponding to object icon. Then select the customized
icon and click “open” button.
⑥Select “Select All/None” and click “Upload” button. When the process bar shows 100%,
user may check whether Light P2-Light 1 has been “불끌”.
Figure 2-8 Customized language setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 11
2.7 Time and Date Setting
In “Time and date” setting part (as shown in Figure 2-9), user may select time type and date
format.
Because time and date only appear in the standby page, the panel can be set to return to
page 10 after a period of time with no operation (the standby page number is 10) in “Return
Standby Page Setting”. So that time and date will appear.
Figure 2-9 Time and date setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 12
3 Button Setting
3.1 Button Objects Setting
Select “1 to 6 Pages” label in the panel configuration page and select buttons to be set at the
top. Click “Targets setting” button on the right, as shown in Figure 3-1.
Note:
The number of objects depends on the button mode. For example, “Combination ON”,
“Combination OFF”, “Combination ON/OFF”, “Dbclick/Combined”, “Short/Long Press”, “Short
Press/Long Jog” and “Clock” can control up to 99 objects, while “Single ON/OFF”, “Single
ON” and “Single OFF” only control 1 object.
Figure 3-1 Button objects setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 13
3.1.1 Add Objects
User should select the button mode of controlling several objects to add objects. For example,
several objects can be controlled by “Combination ON”, “Combination OFF”, “Combination
ON/OFF”, “Dbclick/Combined”, “Short/Long Press” or “Short Press/Long Jog”. This part takes
adding 3 objects to “Combination ON” mode of Button Page-1-Button 1 as an example.
1. Select button in mark ① of Figure 3-1.
2. Set the button mode of button 1 to “Combination ON” in the button list on the left (Mark
② of Figure 3-1).
3. Click “Targets setting” button to open the page (Mark ③ of Figure 3-1).
4. Input “from 1 to 3” in “Input target number” and click “Read” button (Mark ④ of Figure
3-1).
Note: inputting “from 1 to 3” represents adding 3 objects (object 1/2/3), the number
represents object number. In the same way, inputting “from 2 to 4” represents adding 3
objects (object 2/3/4), and inputting “from 3 to 5” represents adding 3 objects (object
3/4/5).
5. Then 3 objects will appear in the object list below, and click “Save”.
3.1.2 Edit Objects
Add objects in Add Objects and configure objects (Continued from the preceding part).
Select objects in object list to change “Subnet ID”, “Device ID”, “Type” (Mark ⑤ of Figure 3-1),
and other parameters (on the basis of the selected type). Click “Save” to save changes.
3.2 Button Status Setting
Select “1 to 6 Pages” label in the panel configuration page and click “Button status” button
on the right, as shown in Figure 3-2. The setting items are explained as follows:
①Status indicator: to switch on/off button indicator.
②Dimming: to enable/disable button dimming.
③Dimming value: to enable/disable buttons to save dimming value. If dimming value is
enabled, the panel will save the dimming value of the preceding operation as the initial
dimming value of objects.
④Mutual: When a button LED is on, other button LEDs excluding the button will be off (Only

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 14
combination mode supports mutual exclusive function).
⑤Double key: to select whether continuous two buttons are combined as a button to use,
the objects of combined button are those of smaller button. For example, after combining
button 1 with button 2, the objects of combined button are those of button 1.
Figure 3-2 Button status setting

Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com 15
4 AC Setting
Select “AC” label in the panel configuration page, as shown in Figure 4-1.
Figure 4-1 AC setting
4.1 General Setting
Select “Enable” at the top of AC setting part (Mark ① of Figure 4-1) to enable AC.
➢Subnet ID
➢Device ID
➢Status when power on: when “OFF” is selected, AC will be OFF when the panel is
powered on. When “Last status” is selected, AC will be in the status before the last power
off when the panel is powered on.
➢HVAC No.: to enter corresponding AC number to control, which ranges from 1 to 128, the
default number is 1.
➢Type: Version 1 (not support HVAC no.) and Version 2 (support HVAC no.).
➢Adjust: to set temperature compensation for correcting temperature data detected by the
panel, which ranges from -8 to 8. For example, when the standard thermometer shows
20℃ while the panel shows 22℃, the temperature compensation should be set to -2℃.