head rush technologies TRUBLUE iQ User manual

TRUBLUE iQ /
TRUBLUE iQ XL
AUTO BE L AY
Operator Manual
Models: TBiQ-LT / TBiQ-XL
NOTE TO INSTALLERS
Always Read Instructions Before Use
Leave this Operator Manual attached to the auto belay. The
Operator Manual contains information relating to the safe
use of the TRUBLUE iQ Auto Belay and includes all product
registration and Warranty information. This document may
only be removed by the Owner/operator. Ensure that this
Operator Manual is readily available to operators at all times
Head Rush Technologies TRUBLUE iQ Operator Manual
P/N 12765-01
Head Rush Technologies products are covered by a number of patents, including
U.S. Patents 8,490,751; 8,851,235; 9,016,435; 8,851,235 and D654,412
& corresponding patents/applications in the USA and in other countries worldwide.

3
www.headrushtech.com |[phone]
TABLE OF CONTENTS
1.0 SAFETY INFORMATION 6
1.1 Symbols Used in this Manual 6
2.0 WARRANTY CONDITIONS 7
2.1 Customer Responsibility 7
3.0 CERTIFICATION 9
3.1 Standards 9
4.0 DESCRIPTION 10
5.0 SPECIFICATIONS 11
6.0 AUTO BELAY PARTS 12
6.1 Label 12
6.2 Location of Safety Labels 13
6.3 Icon Descriptions 14
7.0 UNPACKING 16
7.1 Precautions 16
7.2 Receipt of the Auto Belay 16
7.3 Unpacking the Auto Belay 16
7.4 Storage 17
8.0 INSTALLATION 18
8.1 Precautions 18
8.2 Standards 18
8.2.1 Anchor Points 18
8.2.2 Harness 19
8.2.3 Secondary Connectors 19
8.2.4 Selecting a Location 19
8.2.5 Outdoor Installations 20
8.2.6 Mounting Points 20
8.2.7 Orientation 21
9.0 OPERATION 23
9.1 Operator Training 24
9.2 User Instruction 24
9.3 Harness 25
9.4 Carabiner Use 25
9.4.1 Operation 26
9.4.2 Secondary Connections to the Harness 26

10.0 INSPECTION & MAINTENANCE 27
10.1 Annual Recertification 27
10.2 Scheduled Maintenance 27
10.2.1 Safety Precautions 28
10.3 Daily Inspection 28
10.4 Weekly Inspection 28
10.4.1 Inspection Procedure 29
10.4.2 Webbing Wear 30
10.5 Six Month Inspection 33
10.5.1 Inspection Procedure 33
10.5.2 Webbing Inspection 33
10.6 Nozzle Replacement 35
10.7 Webbing Line Replacement 36
10.7.1 Safety Precautions 36
10.7.2 Webbing Line Replacement Procedure 37
10.8 Replacement Parts 39
10.9 Troubleshooting 39
10.10 Transportation 40
10.11 Upgrades 40
11.0 MANUFACTURER’S DETAILS 40
12.0 INSPECTION LOGS 41
12.1 Weekly Inspection Log 41
12.2 Six Month Inspection Log 43
4www.headrushtech.com |[phone]

IMPORTANT SAFETY NOTICE
Climbing/Descent from Height
Is a Dangerous Activity
Read Before Installation & Operation
Failure by the operator to heed any and all instructions, warnings and cautions
for the correct installation, operation, care and maintenance of the TRUBLUE
iQ Auto Belay may result in death and/or serious injury.
TRUBLUE iQ Auto Belay Model TBiQ-LT and Model TBiQ-XL and their associated
equipment are designed and specified for use in the recreational climbing/aerial
adventure industry as a controlled descent device. Use of the TRUBLUE iQ Auto
Belay for any purposes other than that intended by the Manufacturer is not
permitted.
Owners and operators of the TRUBLUE iQ Auto Belay are responsible for the
safety and training of any person using the TRUBLUE iQ Auto Belay and are
required to undergo training in the correct installation and operation of the
device prior to any use.
These instructions must be made readily available to the operator at all times.
Prior to installation and use, all owners and operators must have read and shown
to have understood all instructions, labels, markings, and safety information
pertaining to the installation, operation, care, and maintenance of the TRUBLUE
iQ Auto Belay system, its component parts, and all associated hardware. Users of
the TRUBLUE iQ Auto Belay must be trained on proper usage of the Auto Belay.
It
is the responsibility of owner/operator to provide this training. Failure to do so can
result in death, serious injury, and equipment damage.
Health and Safety
Owners and operators must abide by all Standards, International, Federal, State
and Provincial laws, and any specific health and safety regulations pertaining to
the installation and use of this product.
Site Rescue Plan
Owners and operators must have devised an emergency rescue plan for
any climber in distress at all sites operating TRUBLUE iQ Auto Belay devices.
Operators must inform Users of the Auto Belay of the procedure for rescuing a
climber in distress prior to climbing.
5
www.headrushtech.com |[phone]

1.0 SAFETY INFORMATION
1.1 Symbols Used in this Manual
The following safety symbols are used throughout this Manual to highlight
potential dangers. One or more precautions may be associated with practices
and procedures described within this Manual. Failure to adhere to any
precautions highlighted can result in death, serious injury, or equipment damage.
Ensure that you read and understand all safety procedures related to the working
environment and the task you are performing.
DANGER
Indicates a hazardous situation exists that, if not avoided, will
result in serious injury or death.
WARNING
Indicates a potentially hazardous situation that, if not avoided,
could result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation that, if not avoided,
may result in injury or equipment damage.
NOTE
Indicates an action that must be taken to ensure personal safety
and prevent damage to property or equipment.
CARE FOR THE ENVIRONMENT
Take care to minimize impact on the environment when carrying
out this procedure.
6www.headrushtech.com |[phone]

2.0 WARRANTY CONDITIONS
The TRUBLUE iQ Auto Belay Devices are warranted against factory defects in
materials and workmanship (excluding specific Field Replaceable Wear Parts - see
“Replacement Parts” section below) for a period of two (2) years from date of
purchase. This Warranty applies only to the original purchaser, and is contingent
upon the Owner/Operator maintaining and using the device in accordance with
TRUBLUE iQ Auto Belay instructions, including the requirement to continue
to maintain annual recertification as described in this Operator Manual. This
Warranty is in lieu of all other warranties, express or implied.
The sole remedy for breach of this Warranty, or for any claim in negligence
or strict liability in tort, is the repair or replacement of any defective parts by
Head Rush Technologies (Manufacturer). Upon notice in writing, Head Rush
Technologies will promptly repair or replace all defective items.
Head Rush
Technologies reserves the right to have any defective equipment returned to its
facility, transportation pre-paid, for inspection before making a repair or replacement.
This Warranty is null and void if parts other than genuine parts are used, or if any
modifications or services have been performed on the device by anyone other
than an authorized Head Rush Technologies servicing agent. This Warranty does
not cover any damages resulting from abuse to the device, damage in transit, or
any other damage beyond the control of Manufacturer. Head Rush Technologies
makes no warranties in respect to trade accessories or component parts which
are not made by Head Rush Technologies. Head Rush Technologies expressly
excludes from this Warranty the replacement of specific Field Replaceable Wear
Parts (see “Replacement Parts” below) which include the Nozzle, the webbing
(line) kit, connectors and/or any anchors supplied with the product.
No person, agent or Distributor is authorized to give any Warranty, other than
the one herein expressed, on behalf of Head Rush Technologies, or to assume
for it any liability pertaining to such products. Head Rush Technologies expressly
disclaims any implied guarantee of merchantability, or claim as to whether
the device is suited for a particular purpose. Purchaser agrees that Head Rush
Technologies shall not be held liable to Owner/Operator for damages of any kind,
including but not limited to: lost or projected profits, equipment down time, any
losses considered to be caused by non-operation or servicing/recertification
down time of the equipment.
2.1 Owner/Operator Responsibility
The following items are considered to be the responsibility of the Owner/
Operator and are therefore non-reimbursable under the terms of the Warranty.
Product installation.
Normal maintenance, including daily, weekly and bi-annual inspections.
Normal replacement of service items.
Replacements required because of abuse, misuse or improper operational
habits of the operator.
7
www.headrushtech.com |[phone]

Field replaceable wear parts.
Normal deterioration due to use and exposure.
The installer and Owner/operator must fully understand these instructions.
Any questions must be submitted in writing to Head Rush Technologies.
Adherence to the Operator Manual, Manufacturer’s instructions, and advice given
by authorized Head Rush service technicians is the responsibility of the owner,
installer, and operator.
8www.headrushtech.com |[phone]

3.0 CERTIFICATION
3.1 Standards
NOTE
If the TRUBLUE iQ Auto Belay is resold outside of the country of destination,
the reseller must provide instructions for use, service, maintenance and
repair in the language of the country of use.
The TRUBLUE iQ Auto Belay can be used as a climbing/descent system device
only in combination with other components. It shall not be deemed suitable for
use until it is ensured that the entire system complies with the requirements of
appropriate regional, state, and federal directives/standards.
The TRUBLUE iQ Auto Belays conform to Regulation (EU) 2016/425 and comply
with the following prevailing Safety regulations:
AS/NZS 1891: Industrial fall-arrest systems and devices – Part 3: Fall arrest
devices
CSA Z259.2.3-99: Descent Control Devices
EN 341: 2011 Class 1A: Personal protective equipment against falls from a
height – Descender devices
ANSI/ASSE Z359.4: Safety Requirements for Assisted-Rescue and Self-
Rescue Systems, Subsystems and Components.
EN 360:2002: Personal protective equipment against falls from a height -
Retractable type fall arresters
Section 4.5: Maximum force <6kN for 150kg capacity
EU Declaration of Conformity:
EU Declaration of Conformity can be downloaded at this website address:
www.headrushtech.com/certification-documents
Body controlling the manufacture of this PPE:
TÜV SÜD Product Service GmbH
Ridlerstraße 65
80339 München, Germany
Notified body performing the CE type exam:
TÜV SÜD Product Service GmbH
Ridlerstraße 65
80339 München, Germany
9
www.headrushtech.com |[phone]

4.0 DESCRIPTION
The TRUBLUE iQ Auto Belay is a controlled descent device designed specifically
for use in the climbing/aerial adventure industry. The TBiQ-LT oers a maximum
descent height of 12.5 m (41 ft), and the TBiQ-XL oers a maximum descent
height of 20 m (65.6 ft). TRUBLUE iQ Auto Belays are suitable for user weights
ranging from 10 - 150 kg (22 - 330 lbs).
The design of the TRUBLUE iQ permits simple installation and removal and
incorporates an advanced self-regulating brake system and automatic line
retraction. The patented magnetic braking mechanism oers users a smooth
descent with a minimal variation in descent rate of both children and adults.
There are no wearing parts in the brake mechanism, ensuring that reliability
remains high while maintenance and operating costs are kept to a minimum.
To protect the longevity of the TRUBLUE iQ, installation, care, and use of the
TRUBLUE iQ Auto Belay must be carried out in accordance with the instructions
in this Manual. The theoretical lifespan of the TRUBLUE iQ Auto Belay is unlimited
with proper care and performing the required annual service maintenance. For
planning purposes, we recommend a planned lifespan of 15 years.
The TRUBLUE iQ is up-gradable with additional functionality. Please contact
Head Rush Technologies for additional information.
10 www.headrushtech.com |[phone]

MODELS TRUBLUE iQ: TBiQ-LT (12.5m)
TBiQ-XL (20m)
CERTIFICATION IN ACCORDANCE WITH EN 341:2011-1A AND
EN 360:2002
DIMENSIONS 292 x 369 x 201 mm (11.5 x 14.5 x 7.9 in)
NET WEIGHT TBiQ-LT: 15.9kg (35lbs)
TBiQ-XL: 19.0kg (41lbs)
MATERIALS CASING Aluminum Alloy
INTERNAL PARTS Zinc plated steel
NOZZLE Polypropylene
NOZZLE INSERT 304 Stainless Steel
WEBBING Polyamide/UHMWPE
MODEL MINIMUM MAXIMUM
MOUNTING HEIGHT
(NOZZLE TO
GROUND)
TBiQ-LT (12.5m) 4.5m (14.8 ft) 12.5m (41.0 ft)
TBiQ-XL (20m) 12.0m (39.4 ft) 20.0m (65.6 ft)
USER WEIGHT ALL MODELS 10 kg (22 lbs) 150kg (330 lbs)
OPERATING
TEMPERATURE
ALL MODELS -4° C (25° F) 60° C (140° F)
ALL MODELS (DRY) -10° C (14° F) 60° C (140° F)
STORAGE
TEMPERATURE ALL MODELS -20° C (-4° F) 60° C (140° F)
LANDING VELOCITY ALL MODELS ------------- 2.0 m/s (6.5 ft/s)
METRIC UNITS ARE THE CONTROLLING UNITS OF MEASURE IN THIS
MANUAL. IMPERIAL UNITS ARE PROVIDED AS A COURTESY AND HAVE
BEEN ROUNDED. IF THE OWNER/OPERATOR/INSTALLER MUST MAKE ANY
UNIT CONVERSIONS, THE METRIC UNITS SHOULD BE REFERENCED.
5.0 SPECIFICATIONS
11
www.headrushtech.com |[phone]

6.0 AUTO BELAY PARTS
PRIMARY MOUNT
HANDLE
WEBBING LINE
CARABINER
SECONDARY
MOUNT
(UNLOADED)
COVER
(FRONT)
CASING
COVER
(BACK)
NOZZLE
6.1 Label
TBiQ-XX SN iQ#######
Model number
Unit serial number
EN standard and
device classification
Notified body
for CE type
examination
IN ACCORDANCE WITH EN 341:2011-1A
AND EN 360:2002
0123
SN iQ
XL#####
12 www.headrushtech.com |[phone]

6.2 Location of Safety Labels
INFORMATION LABEL
SERIAL LABEL
TBiQ-LT SN iQ0000000
TBiQ-XL SN iQXL00000 SPECIFICATION LABEL
CERTIFICATION LABEL
MODEL: TBiQ-XL
RATED BODY WEIGHT:
10 to 150kg (22 to 330lbs)
DEVICE WEIGHT:
19.0 kg (41 lbs
MOUNTING HEIGHT*:
Max. 20.0 m (65.6 ft)
Min. 12.0 m (39.4 ft)
* Mounting heights are measured from nozzle to ground
MAXIMUM LANDING
VELOCITY:
2.0 m/s (6.6 ft/s)
TEMPERATURE RANGE:
Operating: -4°C to 60°C (25°F to
140°F)
Operating (Dry): -10°C to 60°C (14°F
to 140°F)
HEAD RUSH TECHNOLOGIES
1699 Cherry Street, Suite C
Louisville, Colorado 80027, USA
www.headrushtech.com
0123
12775-01
IN ACCORDANCE WITH EN341:2011-1A AND EN 360:2002
MODEL: TBiQ-LT
RATED BODY WEIGHT:
10 to 150 kg (22 to 330 lbs)
DEVICE WEIGHT:
15.9 kg (35 lbs
MOUNTING HEIGHT*:
Max. 12.5 m (41.0 ft)
Min. 4.5 m (14.8 ft)
* Mounting heights are measured from nozzle to ground
MAXIMUM LANDING
VELOCITY:
2.0 m/s (6.6 ft/s)
TEMPERATURE RANGE:
Operating: -4°C to 60°C (25°F to 140°F)
Operating (Dry): -10°C to 60°C (14°F
to 140°F)
HEAD RUSH TECHNOLOGIES
1699 Cherry Street, Suite C
Louisville, Colorado 80027, USA
www.headrushtech.com
0123
12762-01
IN ACCORDANCE WITH EN341:2011-1A AND EN 360:2002
12763-01
1. 2.
4.
6.
8.
10.
12.
13.
11.
9.
3.
5.
7.
EN 12277,
UIAA 105,
EN 361
12763-01
ALWAYS READ AND FOLLOW
THE WARNINGS AND
INSTRUCTIONS FOR USE
TBiQ-SD only
EN 362/EN 12275
10024-04
SERIAL NUMBER:
MANUFACTURE DATE:
RECERTIFICATION DATE:
NEXT RECERT REQUIRED:
BY:
WEBBING DATE OF
MANUFACTURE LABEL*
(Attached to Webbing)
YYYY
Jan.
Apr.
Jul.
Oct.
Feb.
May
Aug.
Nov.
Mar.
Jun.
Sept.
Dec.
*The date of manufacture for the webbing assembly must be recorded in the inspection
log in the back of this Operator Manual. 12.5m or 20.0m webbing assemblies must be
replaced every 1.5 years regardless of condition.
T
B
i
Q
-
L
T
S
N
i
Q
0
0
0
0
0
0
0
WEBBING WARNING LABEL
(Attached to Short Webbing
Assembly)
12816-01
13
www.headrushtech.com |[phone]

6.3 Icon Descriptions
Device Weight Only one user at a time
Body Weight
EN 12277
,
UIAA 105
,
EN 361
Harness standards
Landing Velocity
Do not alter the line. Do
not clamp, knot or tie on
additional line
Country of Manufacture Do not store the line
inside the device wet
Temperature Range
Never install the device
where the line passes
over sharp edges, high
friction areas
Minimum Height
Never permit line to
wrap around or become
entangled with neck,
arms, or legs
12816-01
Only compatible with TRUBLUE iQ
webbing
14 www.headrushtech.com |[phone]

Maximum Height
Connect the carabiner to
the designated belay loop
of your harness, making
sure the gate is locked
Inspect the webbing daily
Check retraction before
each use
Check descent path is
clear, Always land with
slightly bent knees to
absorb landing
Do not let TBiQ-SD (The
TRUBLUE iQ Speed only)
retract uncontrolled
Serial number
EN 362/EN 12275
Minimum connector
strength for installation Manufacture Date
Avoid swing falls into
objects Date
Primary connector taut,
secondary back-up
connector loose
Technician
15
www.headrushtech.com |[phone]

7.0 UNPACKING
7.1 Precautions
LEAVE THIS OPERATOR MANUAL ATTACHED TO THE AUTO BELAY
UNTIL INSTALLATION IS COMPLETE
The Operator Manual contains information relating to the safe use of the
TRUBLUE iQ Auto Belay and includes all product registration and Warranty
information. The Operator Manual document may only be removed by the
Owner/operator. Ensure this Manual is readily available to Auto Belay Owner/
operators at all times.
DO NOT DISPOSE OF PACKAGING
The cardboard box and internal packaging are required for the return of the
Auto Belay for the annual recertification. Please keep packaging in a safe
place until required.
7.2 Receipt of the Auto Belay
The TRUBLUE iQ Auto Belay is packaged in a recycled cardboard box and contains:
1 x TRUBLUE iQ Auto Belay Model TBiQ-LT or TRUBLUE iQ Auto Belay
Model TBiQ-XL
1 x 12.5 m (41 ft) or 20m (65.6ft) webbing lower line.
1 x Carabiner or EN 362 connector attached to the Webbing Lower Line.
Some variants do not come with a connector.
1 x Operator Manual
7.3 Unpacking the Auto Belay
To unpack the Auto Belay:
1. Upon receipt of Auto Belay, inspect for signs of shipping damage or
contamination. If Auto Belay shows any signs of damage or mishandling
contact your Head Rush Technologies distributor.
2. Check all labels axed to Auto Belay are present and legible.
10024-04
SERIAL NUMBER:
MANUFACTURE DATE:
RECERTIFICATION DATE:
NEXT RECERT REQUIRED:
BY:
Do not use the Auto Belay after date shown here.
16 www.headrushtech.com |[phone]

3. Check the Certification Label for the ‘Next Recertification Required’ date.
If the date shown has passed or the label is missing or illegible, the Auto
Belay must not be put into service.
4. Register your Auto Belay online at www.headrushtech.com/register.
PRODUCT REGISTRATION MUST BE COMPLETED
Product Registration is critical for receiving product notifications,
recertification notices, and up-to-date information for the safe use of the
TRUBLUE iQ Auto Belay. Registration is fast and easy and can be done online
at www.headrushtech.com/register.
5. Read the Operator Manual and familiarize yourself with all aspects of
installation, operation, care and maintenance.
7.4 Storage
If the Auto Belay is to be left unused for longer than two weeks, ensure the unit is
clean and dry and line is fully retracted into the unit.
When returning the Auto Belay to duty after an extended period of inactivity,
always carry out a full inspection and operational check.
DO NOT STORE IN WET CONDITION
After exposure to water or damp conditions thoroughly clean and dry the
Auto Belay. Ensure Auto Belay is not left with wet webbing line retracted
inside the casing for long periods (longer than 1 week). If the webbing is wet
and the device is to be stored, remove the Nozzle and pull all the webbing
out until the shackle is exposed. Insert a pin through the line to prevent
retraction, and allow the webbing to dry naturally away from open fire or
heat source.
Always store in a clean and dry environment.
17
www.headrushtech.com |[phone]

8.0 INSTALLATION
8.1 Precautions
ALWAYS USE DESIGNATED MOUNTING POINTS
Never install the Auto Belay using any part of the device apart from the designated
mounting points. Incorrect mounting can result in serious injury or death.
ALWAYS USE THE CORRECT MOUNTING HEIGHT
Failure to install the device at the correct mounting height could result in
damage to the device or loss in device performance.
HARD IMPACTS MAY RESULT IN STRUCTURAL DAMAGE
Dropping of, or hard impacts to, the Auto Belay can result in serious damage
to mounting points and internal parts and may compromise safety of
operation. If the Auto Belay is subject to a hard impact, remove it from duty
and return to a service agent for inspection.
HEAVY ITEM  TBIQLT: 15.9KG 35LBS
TBIQXL: 19.0KG 41LBS
Take care when lifting the Auto Belay. Take care not to drop the device as this
may result in serious injury or equipment damage.
ALWAYS MOUNT VERTICALLY
Always mount the Auto Belay vertically with the Nozzle pointing downwards
and the line exiting the bottom of the device. Failure to do so will result in
incorrect operation and compromise User safety.
HARMFUL CONTACT
Do not allow solvents, acids, sharp edges etc. to get into contact with the
device, especially the webbing. If this occurs, the Auto Belay must be inspected.
8.2 Standards
Prior to installation, all Operators must be familiar with the requirements of all
relevant Standards for anchor points, hardware, and equipment used with the
Auto Belay.
8.2.1 ANCHOR POINTS
All anchor points and connectors used with a TRUBLUE iQ Auto Belay must
conform to any federal or state requirements for such devices.
18 www.headrushtech.com |[phone]

Head Rush Technologies requires anchor points to have a minimum load capacity
of 10 kN (2200 lbs) in expected directions of application. Other national and
international standards for anchor points may apply and require higher load
capacity. Consult with the authority having jurisdiction for your required load
capacity.
The location and anchor points for the TRUBLUE iQ Auto Belay should comply
with the following:
Anchor points are not to be used by additional devices or as attachments
for hardware not associated with the Auto Belay installation.
Anchor points should be of a suitable size to correctly install any mounting
hardware.
8.2.2 HARNESS
All harnesses used in conjunction with the TRUBLUE iQ Auto Belay must be of
the correct size and fit, be in serviceable condition, and comply with one of the
following standards:
EN 361 - Personal protective equipment for prevention of falls from a
height – Full body harness.
EN 813 - Personal protective equipment for prevention of falls from a
height – Sit harness.
EN 12277 - Type A. Full Body Harness.
EN 12277 - Type B. Small Full Body Harness.
EN 12277 - Type C Sit Harness.
8.2.3 SECONDARY CONNECTORS
All secondary connectors and hardware used in the installation of the TRUBLUE
iQ Auto Belay must conform to the requirements of:
EN 362 - Types of connectors for personal protection.
EN 12275 - Types of connectors for mountaineering.
All connectors, hooks, D-rings and shackles used to mount the TRUBLUE iQ Auto
Belay must be of compatible size, shape and strength for the mounting point to
which they are attached.
8.2.4 SELECTING A LOCATION
The TRUBLUE iQ Auto Belay is to be mounted at the top of the climbing route/
descent path with the Nozzle and webbing line pointed down.
19
www.headrushtech.com |[phone]

When selecting a location to mount the Auto Belay, ensure that:
The Auto Belay will hang vertically over the climbing route with the Nozzle
pointing down.
All paths that can be encountered by the User when connected to the
Auto Belay are free of sharp edges and high-friction surfaces that may
damage the webbing line.
Ensure that the descent path and landing area are free of other people or
obstacles that may cause entanglement or restrict the user’s ascent or descent.
The Auto Belay is free to pivot in all directions and should not bind the
mountings or be able to impact upon the surrounding structure.
8.2.5 OUTDOOR INSTALLATIONS
The TRUBLUE iQ Auto Belay may be installed outdoors.
It is recommended that in wet or high-variable temperature environments, the
Auto Belay is protected from the direct ingress of water or foreign objects.
NOTE
Prolonged exposure to the elements will increase the risk of internal
corrosion and degradation of the webbing line, resulting in increased
operation and servicing costs. Increased inspections are required in these
types of environments.
Outdoor installations in high UV, wind, and sand will require more frequent
webbing replacements as these elements will artificially age the webbing and
reduce its strength over time. We recommend storing the webbing inside the
device when not in use and replacing the webbing every 6 months as a precaution.
8.2.6 MOUNTING POINTS
USE ONLY THE DESIGNATED MOUNTING POINTS
Use only the correct mounting points. Use of incorrect points can result in
equipment damage.
Ensure all mounting hardware is secure but free to pivot in mounting point.
Ensure the mounting insert is used with the connector to reduce wear on the
mounting point.
The TRUBLUE iQ Auto Belay is manufactured with a: single central pivot mounting
point, an oset mounting point, and formed handle located at the top of the
casing. These mounting points are located to ensure the unit hangs centrally and
vertically with the line Nozzle pointing down.
20 www.headrushtech.com |[phone]