Health in motion INSPIRE IC1.5C User manual

USER MANUAL
Model # IC1.5C / IC1.5C-CA
ITM. / ART. 1405250
Record Serial Number Here
by Health in Motion LLC
October 2020
INDOOR
CYCLE

Pg. 2 V1.2-C-CA
BEFORE YOU BEGIN
Welcome to the Inspire Fitness Family! Thank you for choosing the Inspire Fitness IC1.5 Indoor Cycle. For your safety
and benet, read this manual carefully before using the machine. As a manufacturer, we are committed to providing you
complete customer satisfaction. If you have any questions, or nd there are missing or damaged parts, please call our
TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you. Support is
provided in English and Spanish.
Email
costcosupport@inspiretness.com
Phone
877-738-1729
Mon-Fri 8am-5pm PST
Chat
www.inspiretness.com
TABLE OF CONTENTS
BEFORE YOU BEGIN..........................................................................................................2
IMPORTANT SAFETY NOTICE............................................................................................3
WARNING AND IMPORTANT LABEL PLACEMENT..........................................................4
ASSEMBLY AND SETUP.....................................................................................................5
ASSEMBLY INSTRUCTIONS...............................................................................................7
ADJUSTMENT FEATURES...................................................................................................9
APP DOWNLOAD.............................................................................................................10
NOTES...............................................................................................................................10
REGULATORY INFORMATION........................................................................................10
WARRANTY......................................................................................................................12
IC1.5C EXPLODED VIEW.................................................................................................13
IC1.5C PARTS LIST...........................................................................................................14
REGISTER WARRANTY ONLINE
To register your product for warranty, visit inspiretness.com/support.

Pg. 3 V1.2-C-CA
IMPORTANT SAFETY NOTICE
Precautions
This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of
exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. Please note the
following safety precautions:
1. Always keep children and pets away from the machine. DO NOT leave children unattended in the same room with the
machine. The linkages on this machine can cause serious injury or death if used improperly.
2. Never place your hands or feet in the path of the pedals because injury may occur to you or damage may occur to the
equipment. Never allow children to come near or approach the moving linkages while in use.
3. Feet should be fully rested and securely strapped onto the pedals during the entire workout.
4. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once.
CONSULT A PHYSICIAN IMMEDIATELY.
5. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors.
6. Keep hands away from all moving parts and ywheel.
7. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become
caught in the machine. Running or aerobic shoes are also required when using the machine.
8. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended
by the manufacturer.
9. Do not place any sharp objects around the machine.
10. Disabled persons should not use the machine without a qualied person or physician in attendance.
11. Before using the machine to exercise, always do stretching exercises to properly warm up.
12. Never operate the machine if the machine is not functioning properly.
13. Maximum user weight 136 kg / 300 lb.
14. Operating frequency: 2402-2800MHz, Max transmit power: 1mW.
Care and Maintenance
1. Inspect and tighten all parts before using the machine.
2. The Frame and Seat Pad of the machine can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT
use solvents.
WARNING
BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY
IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH
PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. Health In Motion, LLC.
DOES NOT ASSUME ANY RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED
BY OR THROUGH THE USE OF THIS PRODUCT.

Pg. 4 V1.2-C-CA
FAILURE TO FOLLOW INSTRUCTIONS MAY LEAD TO SERIOUS
PERSONAL INJURY. FLYWHEEL MOMENTUM WILL KEEP PEDALS
TURNING EVEN AFTER YOU STOP PEDALING. DO NOT ATTEMPT TO
DISMOUNT BIKE OR REMOVE FEET FROM PEDALS UNTIL PEDALS
HAVE COMPLETELY STOPPED. ALWAYS RIDE IN CONTROL. MAKE
SURE ALL PULL PINS, LOCKS, AND SAFETY LATCHES ARE IN PLACE
AND FULLY ENGAGED BEFORE EACH USE.
WARNING
HEALTH IN MOTION, LLC.
SALES AND SERVICE: (877) 738-1729
MODEL: IC15
MADE IN CHINA
SERIAL NUMBER
IC15-20-XX-XXXXXX
Model name:
255 Airport Circle, Suite 101.
Corona, California 92880, United States.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC ID:
IC1.5
2ATO8INSPIREIC105
Health in Motion, LLC.
WARNING AND IMPORTANT LABEL PLACEMENT

Pg. 5 V1.2-C-CA
ASSEMBLY AND SETUP
Package Contents
ID. NAME QTY. ID. NAME QTY.
1 Frame 15Pedals, Right & Left 2
2 Handlebars 1118 Tablet Mount 1
3Front Foot Tube 1119 Hardware Kit 1
4Rear Foot Tube 1

Pg. 6 V1.2-C-CA
IC1.5C Assembly Hardware Kit
NOTE: The parts shown are not drawn to scale. Please use your own ruler or scale to measure the size.
ID. NAME QTY.
20 Button Head Cap Screw (M8*45) 4
22 Socket Head Cap Screw (M8*60) 2
BBattery 1
21 Flat Washer 6
24 Handlebar Logo Cover 1
T1 Wrench 1
T2 Allen Wrench #5 1
T3 Allen Wrench #6 1
114 Socket Head Cap Screw (M6*16) 2
Button Head Cap Screw (M8*45)
Flat Washer
Wrench
Battery
Allen Wrench #5
Allen Wrench #6
Handlebar Logo Cover
Socket Head Cap Screw (M8*60)
Socket Head Cap Screw (M6*16)
Flat Washer

Pg. 7 V1.2-C-CA
ASSEMBLY INSTRUCTIONS
Step 1
Attach the front foot tube (3) and rear foot tube (4), using button head cap screws (20) with washers (21). Use the Allen
wrench #5 (T2).
Step 2
Slide the handlebars (2) into position on the frame (1), secure with two socket head cap screws (22) with washers (21). Use
the Allen wrench #6 (T3). After tightening the cap screws insert the handlebar logo cover (24) into place as shown.

Pg. 8 V1.2-C-CA
Step 3
Attach the right and left pedals (5), keep in mind when installing the left pedal that it has left-handed thread. Use the
wrench (T1). Attach the tablet mount (118) to the handlebars (2) using two socket head cap screws (114). Use the allen
wrench #5 (T2).
Step 4
Remove the battery cover and carefully pull out the battery holder circuit board. Install the provided battery (B) into the
circuit board. Then reinstall the circuit board and cover.
1.WARNING – KEEP BATTERIES OUT OF
REACH OF CHILDREN.
2. Swallowing may lead to serious injury in
as little as 2 hours or death, due to chemical
burns and potential perforation of the
esophagus.
3. If you suspect your child has swallowed or
inserted a button battery, immediately seek
urgent
medical assistance.
4. Examine devices and make sure the
battery compartment is correctly secured,
e.g. that the screw or other mechanical
fastener is tightened. Do not use if
compartment is not secure.
5. Dispose of used button batteries
immediately and safely. Flat batteries can
still be dangerous.
6. Tell others about the risk associated with
button batteries and how to keep their
children safe.

Pg. 9 V1.2-C-CA
ADJUSTMENT FEATURES
Handlebar Hand Positions
• Seated Flat – Hand Position 1 or 2
• Seated Climb – Hand Position 2
• Standing Flat – Hand Position 2
• Standing Climb – Hand Position 3
• Jumps – Hand Position 2
RESISTANCE ADJUSTMENT AND
PUSH TO STOP KNOB TABLET MOUNT ANGLE
ADJUSTMENT
SEAT FORE AND AFT
ADJUSTMENT
SEAT HEIGHT
ADJUSTMENT
FRAME LEVELING PADS
HANDLEBAR HEIGHT
ADJUSTMENT

Pg. 10 V1.2-C-CA
APP DOWNLOAD
Need some workout ideas and motivation? Ready to ride with some
of the best trainers in the nation? Start your FREE trial of our all-new
Inspire Fitness mobile app. It’s lled with live and on demand video
workouts, as well as written workout plans designed by our very own
Inspire Fitness trainers.
NOTES
ANT, ANT+ and the ANT+ logo are trademarks of Garmin Switzerland GmbH. The Bluetooth® trademarks—including the
BLUETOOTH word mark, the gure mark (the letter “B” and oval design), and the combination mark (Bluetooth word mark
and design)—are owned by the Bluetooth SIG.
REGULATORY INFORMATION
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in an individual installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one of the following measures:
• Reorient or relocate the bike.
• Increase the distance between the bike and the aected receiver.
• Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance,
any changes ormodications not expressly approved by the party responsible for compliance could void the user’s
authority to operate thisequipment.
IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
lefonctionnement.

Pg. 11 V1.2-C-CA
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain materials considered hazardous to the environment. Federal law
requires proper disposal.
Product Recycling and Disposal
This equipment must be recycled or discarded per applicable local and national regulations. Product labels, in accordance
with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the
framework for the return and recycling of used equipment as applicable throughout the European Union. The WEEE label
indicates that the product is not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance
with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused,
recycled, or recovered at end of life. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose
of end of life EEE as unsorted municipal waste. Always use the collection framework available to customers for the return,
recycling, and recovery of WEEE. Customer participation is important to minimize any potential eects of EEE on the
environment and human health due to the potential presence of hazardous substances in EEE. For proper collection and
treatment, contact Inspire Customer Support.
RED Declaration of Conformity (DOC)
The product is in conformity with the following standards and/or other
normative documents:
Health & Safety (Art. 3(1)(a)): EN 62479:2010
EMC (Art. 3(1)(b)): EN 55014-1:2017 + EN55014-2:2015 +
Draft ETSI EN 301 489-1 V2.2.0:2017 +
Draft ETSI EN 301 489-17 V3.2.0:2017
Spectrum (Art. 3(2)): EN 300 328 V2.1.1:2016
Technical File Held by: Health in Motion, LLC
Place and Date of Issue: 2020/5/14
We, Health In Motion, LLC 255 Airport Circle, Suite 101 Corona, California
92880, United States declare under our sole responsibility that the
product: Spin Bike IC1.5 to which this declaration relates is in conformity
with the essential requirements and other relevant requirements of the
RED Directive (2014/53/EU).

Pg. 12 V1.2-C-CA
WARRANTY
This Warranty applies to Inspire cardio products manufactured or distributed by Inspire Fitness.
Inspire IC1.5C Warranty Periods
RESIDENTIAL WARRANTY
10 Years
3 Years
1 Year
FRAME – Includes Main Frame and Welds
PARTS – Excluding Paint and Finish(unless defective out of box)
LABOR
Inspire Fitness warrants that the Product you have purchased for personal, family or household use from Health in Motion
or from an authorized Inspire Fitness reseller is free from defects in materials or workmanship under normal use during
the warranty period. Your sales receipt, showing the date of purchase of the Product, is your proof of the date of purchase.
This warranty extends only to you, the original purchaser. It is not transferable to anyone who subsequently purchases
the Product from you. It excludes expendable parts such as paint and nish. This Warranty becomes VALID ONLY if
the Product is assembled / installed according to the instructions / directions included with the Product. Please visit
inspiretness.com/support to register your product ahead of time and stay up to date with product updates.
Replacement and Repair of Parts
During the warranty period Inspire Fitness will, at no additional charge, repair or replace the Product if it becomes
defective, malfunctions, or otherwise fails to conform with this Warranty under normal personal, family, or household use.
In repairing the product Inspire Fitness may replace defective parts with, at the option of Inspire Fitness, serviceable used
parts that are equivalent to new parts in performance, or new parts. All exchanged parts and Products replaced under this
warranty will become the property of Inspire Fitness. Inspire Fitness reserves the right to change manufacturers and or
specication of any part to cover any existing warranty.
Service Procedures
To obtain warranty parts, you must return the parts to Inspire Fitness or an authorized Inspire Fitness retailer in its
original container (or equivalent). You must pre-pay any shipping charges, taxes, or any other charges associated with
transportation of the Product. In addition, you are responsible for insuring any Product shipped or returned. You assume
the risk of loss during shipment. You must present Inspire Fitness with proof-of-purchase documents (including the date
of purchase, Model, and Serial Number). Any evidence of alteration, erasing or forgery of proof-of-purchase documents will
be cause to void this Warranty. Register your warranty at inspiretness.com/support.
Conditions and Exceptions
This Warranty does not extend to any Product not purchased from Inspire Fitness or from an authorized Inspire Fitness
reseller. This Warranty does not extend to any Product that has been damaged or rendered defective; (a) as a result of
accident, misuse, or abuse; (b) by the use of parts not manufactured or sold by Inspire Fitness; (c) by modication of the
Product; (d) as a result of service by anyone other than Inspire Fitness, or an authorized Inspire Fitness warranty service
provider; (e) product that has not been properly maintained (follow maintenance schedule found on product). Should
any product submitted for Warranty service be found to be ineligible, an estimate of repair cost will be furnished, and the
repair will be made if requested by you upon Inspire Fitness receipt of payment or acceptable arrangement of payment.
AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Pg. 13 V1.2-C-CA
IC1.5C EXPLODED VIEW

Pg. 14 V1.2-C-CA
No. SKU Description Qty.
1BC423-200-010 Main Frame 1
2BC423-320-006PZ Handlebar Assembly 1
3 BC423-220-004 Front Stabilizer 1
4BC423-220-003 Rear Stabilizer 1
5 L/R B465-340-001 Crank Pedal Right and Left 1
6 BC423-320-007 Handlebar Post 1
7 BC423-320-005 Seat Post Support 1
8 BC423-320-004 Seat Post Free Rail 1
9 BC423-340-001PZ Magnet Holder Assembly 1
10 BC423-380-001 Crankshaft Assembly 1
11 BC423-881-026 Resistance Knob Cover 1
12 BC423-881-025 Resistance Assembly Dial 1
13 BC423-561-024 Resistance Assembly Bolt 1
14 BC423-881-009A Decoration Cover 1
15 BC423-881-010 Square Nut-Top 1
16 BC423-881-011 Square Nut-Bottom 1
17 BC423-561-019 Sleeve 1
18 BC423-400-003 Seat 1
19 BC423-881-012B Plug 2
20 0117-208-004 Socket Cap Screw 2
21 0116-608-008 Arc Washer 6
22 0113-208-458A Hexagon Socket Button Head Screw 4
23 BC423-630-018/023 Battery Board (with Button Battery) 1
24 BC423-881-062 Logo Cover 1
25 BC423-321-009 Adjustment Plate 1
26 BC423-881-032A Slide Plate 1
27 BC423-881-034A Adjustment Knob 1
28 BC423-881-006A Tube Sleeve 1
29 BC423-881-027A Tube Sleeve 1
30 BC423-881-061 Seat Adjustment Knob 1
31 BC423-881-014A Plug 4
32 BE920-881-011 Rear Foot Pad 4
33 BC423-881-055A Transportation Rollers 2
34 BC423-881-001 Right Shroud 1
35 BE480-881-005 Cover 2
36 0110-410-592 Flange Nut 2
37 BC850-561-022 Right Crank 1
38 BC850-561-032 Left Crank 1
39 BC423-881-007A Bottom Bracket Cover 1
40 BC423-501-001 Belt 1
41 BC423-630-017 PCB Board 1
42 BC423-630-022 Plastic Washer 3
43 BC423-881-003 Cover 1
44 BC423-881-004 PCB Board Cover - A 1
45 BC423-881-005B PCB Board Cover - B 1
46 0110-720-101 Nylon Nut 1
47 0200-231-31C Bearing 2
48 BC423-881-035A L Knob 1
49 BC423-561-051 Sleeve 1
50 BC423-561-027 Magnet 1
51 BC423-561-055 Space 1
52 BC423-881-002 Left Shroud 1
53 BC423-380-001A Water Bottle Holder 1
54 0110-708-028 Nylon Nut 1
55 0110-706-028 Nylon Nut 2
56 BC12-011-92A U Bracket 1
57 BC12-011-72B Tension Bolt 1
58 BC423-561-011 Axle 1
59 0171-600-03C Bearing 2
No. SKU Description Qty.
60 BC423-561-031 Press Pulley Sleeve 1
61 BC423-881-050 Press Pulley 1
62 0116-006-008 Flat Washer 3
63 0111-006-128A Hex Bolt 1
64 BC423-321-010 Fix Plate 1
65 BC770-801-011 Sensor Holder 1
66 BC423-630-019/021 Speed Sensor with Wire 1
67 BC423-881-008A Small Cover 1
68 0110-308-008 Acorn Nut 1
69 0110-008-008 Hex Nut 1
70 BC423-561-028A Brake Sleeve 1
71 BC423-561-018 Square Nut 1
72 BC423-561-012 Flywheel with Aluminum Ring 1
73 0171-630-000 Bearing 2
74 BC423-561-025 Flywheel Sleeve 1
75 0116-010-008 Flat Washer 1
76 0110-110-102 Nut 1
77 BC423-881-022A Small Cover-Flywheel 2
78 0114-142-138 Cross Recessed Pan Head Tapping Screws 6
79 BC423-881-023A Rubber Plug 6
80 BC423-561-013 Flywheel Shaft 1
81 0110-010-101A Hex Nut-Thin 2
82 BC423-881-047 Flywheel 1
83 0110-010-158 Hex Nut-Thin 3
84 0113-105-108A Cross Recessed Pan Head Screw 15
85 0116-005-03 Flat Washer 2
86 0110-305-008 Acron Nut 2
87 0113-105-058 Cross Recessed Pan Head Screw 4
88 0113-104-110 Cross Recessed Pan Head Screw 4
89 0114-142-198 Cross Recessed Pan Head Tapping Screw 5
90 0113-105-158 Cross Recessed Pan Head Screw 2
91 0113-206-458 Hexagon Socket Button Head Screw 1
92 0117-112-08 Spring Ring 2
93 BC423-561-016 Axle 1
94 BC423-340-001 Magnet Holder 1
95 BC423-561-014A Tension Spring 1
96 BC423-321-016 Sensor Fixture 1
97 BC423-881-024A Magnet Cradle 1
98 BC423-881-019A Brake Pad 1
99 BC423-561-015 Magnet 2
100 BC423-320-006 Handlebar 1
102 BC423-861-004 Dipping Grip 2
103 0113-706-108 Socket Cap Screw 3
104 BC423-881-031A Handlebar Cover 1
105 BC423-321-015 Plate 1
108 BC423-881-028 iPad Holder Base-Top 1
110 0114-152-102 Cross Recessed Pan Head Screw 2
111 0113-135-138 Cross Recessed Pan Head Tapping Screw 8
112 BC423-881-053B iPad Holder Support-Upper 1
113 BC423-881-054A iPad Holder Support-Bottom 1
114 0113-206-004 Socket Cap Screw 2
115 BC423-561-029A Rotation Rivet 1
116 BC423-881-052A Support Base 1
117 0114-142-108A Cross Recessed Pan Head Tapping Screw 4
118 BC423-880-057 iPad Holder Assembly 1
119 BC423-890-018 Hardware Pack 1
IC1.5C PARTS LIST

Pg. 15 V1.2-C-CA
Distributed by:
Costco Wholesale Corporation
P.O. Box 34535
Seattle, WA 98124-1535
USA
1-800-774-2678
www.costco.com
Costco Wholesale UK Ltd /
Costco Online UK Ltd
Hartspring Lane
Watford, Herts
WD25 8JS
United Kingdom
01923 213113
www.costco.co.uk
Costco Wholesale Japan Ltd.
3-1-4 Ikegami-Shincho
Kawasaki-ku, Kawasaki-shi,
Kanagawa 210-0832 Japan
0570-032600
www.costco.co.jp
Costco Wholesale Canada Ltd.*
415 W. Hunt Club Road
Ottawa, Ontario
K2E 1C5, Canada
1-800-463-3783
www.costco.ca
* faisant aaire au Québec sous
le nom les Entrepôts Costco
Costco Wholesale Spain S.L.U.
Polígono Empresarial Los Gavilanes
C/ Agustín de Betancourt, 17
28906 Getafe (Madrid) España
NIF: B86509460
900 111 155
www.costco.es
Costco Wholesale Korea, Ltd.
40, Iljik-ro
Gwangmyeong-si
Gyeonggi-do, 14347, Korea
1899-9900
www.costco.co.kr
Importado por:
Importadora Primex S.A. de C.V.
Blvd. Magnocentro No. 4
San Fernando La Herradura
Huixquilucan, Estado de México
C.P. 52765
RFC: IPR-930907-S70
(55)-5246-5500
www.costco.com.mx
Costco Wholesale Iceland ehf.
Kauptún 3-7, 210 Gardabaer
Iceland
www.costco.is
Costco Wholesale New Zealand Limited
67 Maki Street
Massey, Auckland 0814
New Zealand
Costco Wholesale Australia Pty Ltd
17-21 Parramatta Road
Lidcombe NSW 2141
Australia
www.costco.com.au
Costco France
1 avenue de Bréhat
91140 Villebon-sur-Yvette
France
01 80 45 01 10
www.costco.fr
Shanghai Minhang Costco Trading Co., Ltd
No. 235, ZhuJian Road
Minhang District, Shanghai
China 201106
+86-21-6257-7065

V1.0-C
This manual suits for next models
2
Table of contents