HearthSong Inflatable Easel Quick setup guide

Ages 3+
Adult assembly required.
Adult supervision recommended.
Takes 1 adult to assemble.
Original (731501): approx. 3¼'L x 2¼'W x 4¼'H
Giant (733034): approx. 5¼'L x 3¼'W x 5'H
#731501 | 733034 Conforms to ASTM F963. Made in China. ©HearthSong®2020. Madison, VA 22727. 1-800-533-4397 HearthSong.com
Inatable Easel
Safety and Assembly Instructions
Includes:
Giant (733034)
4 Bottles of paint (2 oz. each)
4 Shaped sponges
2 Paint brushes
Prior to Assembly & Set-up:
Find the right spot. Use on at, rm surface. Lawn should be free of rocks, depressions, sticks, etc.
Ination:
Hand, electric, or foot pump recommended for ination, sold separately at HearthSong.com. Please do not overinate.
Do not inate with an air compressor or any high-pressure hose at a lling station.
Do not inate on rough surfaces.
Assembly:
1. Inate all sections of the easel except the horizontal tube
at the base of the easel. Be careful not to over-inate.
2. Use a garden hose to ll the chamber on underside of the
horizontal tube through the water valve.
3. After water compartment is lled, inate the base tube.
Use:
Completely dry easel surface before painting. If painting surface is wet, paint won't stick to the easel as well.
Use dish soap to help remove paint from hands and fabric. Paint may stain fabrics and temporarily stain skin.
When not in use, clean, dry, deate and store away.
WARNING:
CHOKING HAZARD—Small parts.
Not for children under 3 yrs.
Step 1 Step 2
Original (731501)
4 Bottles of paint (1 oz. each)
4 Shaped sponges
1 Paint brush

Warning Information:
Wear appropriate clothing or paint smock. Remove jewelry and any sharp objects.
Store securely–keep away from children to prevent suffocation.
The easel is not an aquatic toy. It is not for use on water and not meant to be a oatation device.
Keep away from open ames.
This is not a lifesaving device.
Do not use on or near surfaces containing sharp or jagged objects.
Vinyl Plastic Repair:
A vinyl plastic repair kit is included with your inatable. TO USE:
Thoroughly clean the damaged area and allow surface to dry for a minimum of 10 minutes.
Cut a patch large enough to completely cover the hole or puncture.
Remove the paper backing from the patch and press patch rmly over affected area.
Do not inate for 20 minutes.
#731501 | 733034 Conforms to ASTM F963. Made in China. ©HearthSong®2020. Madison, VA 22727. 1-800-533-4397 HearthSong.com