HearthSong 730906 User manual

TO ASSEMBLE:
#730906 | Ages 5+.
WARNING: Adult assembly required.
Make sure you have all the necessary parts:
2"DIAMETER POLES:
• 4 Poles (37¾"L)
• 4 Poles (27½"L)
• 2 Poles (26⅓"L)
1½"DIAMETER POLES:
• 4 Poles (36½"L)
• 4 Poles (28⅓"L)
• 2 Poles (6¼")
JOINTS:
• 4 A Joints
• 2 B Joints
• 1 C Joint
• 1 D Joint
• 4 (38E) Connector for
1½"-diam. Poles
• 4 (53F) Connector for
2"-diam. Poles
WHAT YOU GET
DIAMETER POLES:
• 4 Poles (37¾"L)
• 4 Poles (27½"L)
• 2 Poles (26⅓"L)
JOINTS:
• 4 A Joints
• 14 Bungee-cord hooks for
attaching the Rebounder
and Strike Zone panels
• 25 Black net clamps
• Rebounder Panel
• Strike Zone Panel
• Net
• 6 Ground Stakes
38E Joints
53F Joints
A Joints
B Joints
D Joint
C Joint
Bungee-
cord
hooks
Net
clamps
Net Strike Zone
panel
Rebounder
panel
Before you begin assembly, lay out all parts. Group same-
size poles together. Use the measuring tool on the side
of the box to help you sort the poles into sizes.
3-in-1 Baseball Trainer
Assembly Instructions
1. Create the base assembly. Using two 27½"L x 2" poles and
one 53F connector, assemble the bottom-back-pole. Assemble
the bottom-front-pole using two 28⅓"L x 1½" poles and one
38E connector. Attach two 37¾"L x 2" poles for the sides to
complete the base assembly, using one D and one C joint in the
back and two A joints in the front.
2. Assemble the front-side-poles using one 37¾"L x 2" pole, one
26⅓"L x 2" pole, and one 53F connector to make each pole.
back and two A joints in the front.
3. Slip 5 bungee-cord hooks onto each assembled front-side-pole.
Having the hook openings facing toward the back of the trainer
will make it easier to attach the panels.
26⅓"L x 2" pole, and one 53F connector
to make each pole.
D
Ground-
stakes
A
C
A
37¾" L x 2"26⅓"L x 2"
Back: Two 27½"L x 2"Poles
Front: Two 28⅓"L x 1½" Poles
38E Connector 53F Connector
53F Connector
Base Assembly
Front-Side-Poles
Bungee-cord Hooks
D
A
C
A
Back
Front
D
A
C
A
Back
Front
37¾"L x 2"
27½"L x 2"
26⅓"L x 2"
36½"L x 1½"
28⅓"L x 1½"6¼"L x
1½"
Sides: Two
37¾"L x
2" Poles
WARNING:
CHOKING HAZARD—Small parts.
Not for children under 3 yrs.

Conforms to ASTM F963. Made in China exclusively for HearthSong. ©2016.
Madison, VA 22727. 1-800-533-4397
hearthsong.com
4. Assemble the front-top-pole using two 27½"L x 2"poles and
a 53F connector.
5. Slip 4 bungee-cord hooks onto the top-front-pole.
6. Add the front-top-pole to the two front-side-poles using
two A joints.
two A joints.
7. Assemble the back-top-pole using two 28⅓"L x 2"poles and
a 38E connector.
8. Connect the back-top-pole to the front-top-pole using
two 6¼"L x 1½" poles and two B joints.
9. Assemble the two side-back-poles using two 36½"L x 1½" poles
and a 38E connector for each pole.
10. Connect the two side-back-poles to the top-pole assembly and
bottom-pole assembly.
11. Anchor the side and back poles with two ground stakes each.
two 6¼"L x 1½" poles
and two B joints.
Assemble the
two side-back-poles
using
two 36½"L x
ATTACHING THE NET
Once the trainer is assembled, you are ready
to attach the net. Making sure the red tabs
are on top, pull the net all the way up to the
front-top-pole and around the front-side- and
back-side poles. Wrap the net around the poles
and use the black net clamps to connect a
thread to the net binding, spacing them evenly
along the poles. (Tip: remove the bottom front
bar and use as a batting cage.)
1. Detach the front-ground-pole from the assembled trainer and
thread it through the channel in the bottom of the Rebounder or
Strike Zone panel, whichever you want to attach.
2. Stretch the panel tight by connecting the bungee-cord hooks on
the top-front-pole and front-side-poles to the grommets in the top
and sides of the panel.
ATTACHING THE REBOUNDER
OR STRIKE ZONE PANEL
53F ConnectorA A
38E Connector
6¼"Pole
6¼"Pole B (back joint)
B (back joint)
Two 36½"L x 1½"Poles
38E Connector
Front-Top-Pole
Back-Top-Pole
Side-Back-Poles
D
A
C
A
Back
Front
D
A
C
A
Back
Front
D
C
A
Back
Front A