Heckler Design Heckler AV H965 User manual

Assembly & Installation
for DTEN Board D7 55”
Heckler AV
H965
Limited Warranty
Heckler Design warrants your product hardware to be free from defects in material and
workmanship throughout the life of the product, and electronic components for a period of
one year from the original date of purchase. If you discover a defect in a product covered
by this warranty, we will repair at our option using new or refurbished components, or if
repair is not possible, replace the item. We reserve the right to request order numbers,
receipts, and other supplemental order information as proof of purchase to validate
warranty claims.
ROLLING STAND
Please have two people to
assemble the Rolling Stand
and to mount the display.
Compatible with
DTEN Board D7 55”
All manuals and user guides at all-guides.com

1:1
6mm Hex key
1/8” Hex Key
F535
F674
F180
F530
4mm Hex key
Cable Tie
2x
1x
1x
1x
4x
Cable Manager
All manuals and user guides at all-guides.com

1:1
8x
4x
Flange Button Head Screws
Button Head Screws
Caster post
Caster
F694
F693
F534
F677
Socket Head Screws
4x
4x
4x
All manuals and user guides at all-guides.com

3
1Lay down arms as shown.
2Install caster posts to the bottom of arms.
4x
F677
All manuals and user guides at all-guides.com

4
3Snap casters onto the posts.
4Assemble the wood shelf.
4x
F677
8x
F693
1x
F180
Please do not fully fasten screws,
until after step 5
All manuals and user guides at all-guides.com

Tightly fasten all bracket and wood
shelf screws
Engage all caster brakes before
installing the bracket
5Upright the Rolling Stand, slide the
bracket in place, and fasten screws.
5
4x
F534
1x
F535
All manuals and user guides at all-guides.com

Put the D7 Display on the soft
surface before installing screws
Ensure all four screws engage
the keyholes
Please leave some space between
TV and screws
6 Partially fasten mounting screws to
7 Hang the D7 Display through the
6
keyhole and fasten screws.
the back of the D7 Display.
4x
F694
1x
F674
1x
F674
All manuals and user guides at all-guides.com

8 Route the power and Ethernet cables
7
9 Install magnetic cable managers
2x
F530
4x
All manuals and user guides at all-guides.com

8
For any questions or issues, please
contact [email protected].
10 Assembly complete
All manuals and user guides at all-guides.com