HECKLER H582 User manual

H582 - Cam Wall Mount
for Jabra PanaCast

2
IN THE BOX
Cam Wall Mount
1 x
Gangbox
1 x
Wall Anchor
1 x
Camera Mounting Screw
1 x
Camera Mounting Key
1 x
Assembly Key
1 x
Wall Mounting Screw
1 x
Cable Tie
1 x

3
TOOLS NEEDED
COMPONENTS NEEDED
(Not Included)
2” Drill Bit
Tape Measure Power Drill
Pen
If you have any questions, please contact
[e-mail].
Phillips
head Bit
Jabra PanaCast
USB Cable
Jabra PanaCast

STEP 1A
Locate mounting position (single display)
4
Important Notes:
Locate and mark the ideal location for your Cam Wall
Mount. It could be mounted underneath, above or beside
the single display.

STEP 1B
Locate mounting position (dual display)
5
Important Notes:
Locate and mark the ideal location for your Cam Wall
Mount. It could be mounted underneath, in between, and
above the dual display.

6
Optional 1A
Drill 2” hole for Gangbox

7
Optional 1B
Install Gangbox

8
Optional 1C
Route USB-C cable and close lid

9
Optional 2
Install wall anchor

10
Step 2
Disassemble Cam Wall Mount
Back plateFront mount

11
STEP 3A
Fasten the back plate to Gangbox

12
STEP 3B
Fasten the back plate to wall anchor

Using the assembly key to install the front mount.
Install front mount
13
STEP 4

Install the Jabra PanaCast
14
STEP 5

Loosen the screw with the assembly key to adjust
camera mount length, and then tighten it.
15
STEP 6
Adjust and set camera mount length.

Loosen the screw with the assembly key to
adjust camera angle, and then tighten it.
16
STEP 7
Adjust and set camera angle.

17
STEP 7
Fasten cable tie and done.