HECKLER H707 User manual

H707 - Soundbar Mount
for Heckler AV Cart
Compatible with most soundbar and soundbar-shaped devices with M4,
M5, or 1/4-20 mounting points spaced apart from 74 mm to 726 mm.
If you have any questions, please contact Heckler.
[email protected]om
844-432-5930

1
A
BCD
GH
IJ
KL
EF
IN THE BOX
Soundbar Mounting Bracket
2 x
A
Hex Key, 5mm
1 x
B
Screw, M6, 10mm
4 x
C
Wingnut, M6
4 x
D
M4 Soundbar-mounting Hardware
Set Screw, M4, 20mm
2 x
E
Wingnut, M4
2 x
F
M5 Soundbar-mounting Hardware
Set Screw, M5, 20mm
2 x
G
Wingnut, M5
2 x
H
1/4”-20 Soundbar-mounting Hardware
Set Screw, 1/4-20, 3/4”
2 x
I
Wingnut, 1/4-20
2 x
J
For Mounting to H702 Device Panel
Screw, M4, 12mm
4 x
K
Hex Key, 2.5mm
1 x
L

2
STEP 1
Fasten the appropriate size of set screws to the soundbar
and measure the distance between the mounting points.
x
x2 x2 x2

3
STEP 2
Determine your ideal soundbar position.
Below the display.
Go to page 4.
Above the display.
Go to page 11.

STEP 3
Mounting below the display
Based on the distance between your soundbar's mounting points,
determine the correct installation of the soundbar-mounting brackets.
4
Option A
74 to 273mm (3 to 10.75 inches)
See Page 5
Option B
273 to 400mm (10.75 to 15.75 inches)
See Page 6
Option C
400 to 585mm (15.75 to 23 inches)
See Page 7
Option D
585 to 726mm (23 to 28.5 inches)
See Page 8

When the distance between your soundbar's mounting points are spaced 74 to 273mm (3 to 10.75 inches) apart.
Option A
5
x4 x4

6
When the distance between your soundbar's mounting points are spaced 273 to 400mm (10.75 to 15.75 inches) apart.
Option B
x4 x4

7
When the distance between your soundbar's mounting points are spaced 400 to 585mm (15.75 to 23 inches) apart.
Option C
x4 x4

8
When the distance between your soundbar's mounting points are spaced 585 to 726mm (23 to 28.5 inches) apart.
Option D
x4 x4

9
STEP 4
Fasten the wingnuts and install the soundbar.
x2

10
TIP
To create improved access to your mounting points in the
event that you soundbar's mounting points are positioned
in front of the AV Cart vertical arms, remove the bottom
two screws that fasten the soundbar-mounting brackets to
the vertical arms, then swing your soundbar upwards.

STEP 3
Mounting above your display
Install H702 Device Panel to Heckler AV Cart.
11
Note that this step requires the use of H702
Device Panel for Heckler AV Cart.

STEP 4
Install the soundbar-mounting brackets to the hole pattern of Device Panel
as needed to create alignment with your soundbar's mounting points.
Note that the brackets can be installed closely to each other if needed.
12
Example
Example

13
x1
x4

14
STEP 4
Fasten the wingnuts and install the soundbar.
x2

TIP
Mount a pair of Logitech Rally speakers
by using two H707 Soundbar Mount kits.
15

TIP
If you need to mount multiple sounbar-shaped devices,
use multiple H707 Soundbar Mount kits.
16