HECKLER WindFall PRIME User manual

Assembly & Installation
H600
WindFall®
STAND
Secure stand for iPad 10.2-inch 7th Generation
Limited Warranty
Heckler Design warrants your product to be free from defect in material and
workmanship for a period of two years from the original date of purchase.
Electronic components are warranted to be free from defect for a period of one
year from the original date of purchase. If you discover a defect, please contact
[email protected]. Heckler Design will repair, at our discretion, using
new or refurbished components. If repair is not possible, Heckler Design will
replace the item.
Compatible with:
iPad 10.2-inch 7th Generation

Keep your special assembly tool in a safe place.
To purchase a replacement, please contact
[email protected].
S130
F581
4x
4x
Felt Feet
Friction Feet
1x
Torx assembly toolF160
1:1

1x
1x
1x
1x
1x
1x
5/64” Hex Key
F165
F420
F115
E104
F129
F132
Kensington Click Safe
Adapter
PivotTable Head
Flat PivotTable
Double - Sided Disk
Single - Sided Disk

1A Install friction feet
1B Install sliding feet
4x
S130
4x
F581
2

1C Install PivotTable to pivot hole
1D Install PivotTable to slide slot
F420
F165
1x
F420
1x
F420
F165
1x
F420
1x
3

4
2 Loosen screws
3 Swing bracket out
Loosen, but
do not remove.
F160

4 Route Lightning cable
5 Slide in the iPad
5
Right-angle Lightening
cable sold separately (T245)

6
6 Tighten screws
F160

7
7A Single side stick to the counter top

8
7B Double side stick to the counter top