HECKLER H702 User manual

H702 - Device Panel
for Heckler AV Cart
Designed & made in Arizona
Patented

2
IN THE BOX
Device Panel for Heckler AV Cart
1 x
PTZ Camera Adapter
1 x
Cart-mounting screws
4 x
Device-mounting thumb nuts
4 x
PTZ camera-mounting screws
1 x
PTZ camera-mounting key
1 x
Cart-mounting assembly key
1 x
Velcro for strapping devices. Two feet.
1 x
Device-mounting thumb screws
4 x

3
COMPONENTS NEEDED
(Not Included)
If you have any questions, please contact
[e-mail].
Heckler AV Cart Camera, Conference
Cam, or Appliance
Device cables

STEP 1
Determine your ideal camera position.
4
OR

5
TIP
You can pre-configure devices and wiring
to Device Panel from a benchtop or configure
in place on Heckler AV Cart.

OPTIONAL
Install Tripp-lite power strip (not included).
6
T498

STEP 3
Install Device Panel to Heckler AV Cart.
7

8
STEP 4
Rotate Device Panel and configure devices
Use the supplied Velcro strap to fasten
your devices and cabling to Device Panel.

9
STEP 5
Mounting a PTZ, go to Step 6.
Mounting wall-mount-style
devices, go to Step 8.

10
STEP 6
Install PTZ Camera Adapter
Fasten the PTZ Camera Adapter
to Device Panel as shown.

11
STEP 7
Install PTZ Camera.
Position your PTZ Camera and
fasten in place as shown.

12
STEP 8
Install devices directly to Device Panel.
Device Panel's hole pattern is
compatible with M4 screws
and VESA 25, 50, 75, and 100
mounting patterns.

13
STEP 9
Rotate Device Panel back to its
vertical position and fasten the
remaining two screws.