Henden Mobile Pool Roller User manual

Mobile Pool Roller
INSTALLATION
GUIDE
Please pass these instructions on to the owner of the pool.

HENDEN - INSTALLATION GUIDE2
The Henden Mobile Pool Roller is a sleek and portable way
to handle and store your pool cover. It is a convenient,
cost effective solution in keeping your swimming
pool entertaining area tidy. Plus, it’s lightweight and
functionally designed for one person operation.
The Henden Mobile Pool Roller also comes with an
approved over cover. This must always be in place when
the cover is stored on your roller, as it prevents the cover
from being exposed to direct sunlight when not in use.
Components of your
Henden Mobile Pool Roller
F
H
2 x Roller Ends Roller Handle2 x Tube Ends Roller Lock
A
B
C
D
4 x Lockable Caster
Wheels
12 x Self Tapping
Screws
3 x Telescopic
Tubes
6 x Straps
E
F
G
H
B
A
C
D
E
G

Mobile Pool Roller
HENDEN - INSTALLATION GUIDE 3
1. Remove the black screws from the
tops of the roller ends (A) to allow
for the tube ends to slide through.
2. Remove the screws from the tube
ends (B) and slide the tube ends into
the roller ends from the inside. One
tube end will have an aluminium
piece attached to it by the screw.
Once that tube end is placed
through the roller end, reattach
the aluminium piece with the same
screw using the Allen key provided.
Installing your Henden
Mobile Pool Roller
B
A

HENDEN - INSTALLATION GUIDE4
3. Place the roller handle (C) onto
the other tube end without the
aluminium piece. Using the screw
that was removed from the tube
end, screw the roller handle to the
tube end using the Allen key.
4. Screw the roller lock (D) onto the
roller end, be sure to use the side
with the roller handle. The black
screw that was removed in the first
step can be screwed back into the
end without the roller lock.
Installing your Henden
Mobile Pool Roller
C

Mobile Pool Roller
HENDEN - INSTALLATION GUIDE 5
5. Using the spanner provided, screw
one of the lockable caster wheels
(E) into the bottom of the roller end.
Repeat for the other three wheels.
6. There are three telescopic tubes,
two are slightly skinner than
the other tube (F). Using the
larger tube, slide the skinnier
telescopic tubes into either
end until you reach the desired
size roller for your pool cover.
E
F

HENDEN - INSTALLATION GUIDE6
7. Once you are happy with the size
of your roller, use the self tapping
screws (G) on the middle tube to
secure the other tubes into place
using a Phillips head screwdriver.
Do this on the flat ridges of the tube,
two on either end. There should
be a total of four screwed in.
8. Insert the six straps from the
strap kit (H) into the thin opening
on the tube. The placement
varies on the size of your pool
cover. As a guide, place two
on each of the three tubes.
Installing your Henden
Mobile Pool Roller
G
H

Mobile Pool Roller
HENDEN - INSTALLATION GUIDE 7
9. Insert the tube into the tube ends.
10. Using the self tapping screws,
secure the tubes into the tube ends
with a Phillips head screwdriver.
Use three screws on each end.
Simply secure your cover to the
straps and your Henden Mobile
Pool Roller is ready to be used.

Warranty Information
Your Henden Mobile Pool Roller is covered against manufacturer
defects for a total of 5 years on the complete roller and 1 year
on cover straps and clips, from the original date of purchase.
Technical and After Sales Support
Should you require technical or after sales support for your
Henden Mobile Pool Roller, contact your nearest Reece
Irrigation & Pools branch. Visit reece.com.au/storefinder
for a complete list of Reece Irrigation & Pools branches.
5 years
Complete roller
1 year
Cover straps
and clips