Hercke 7EVEN Series User manual

ASSEMBLY INSTRUCTIONS
Storage Drawers
3”, 6”, 12”

A Phillips head N0. 2 screwdriver is the
only tool required to assemble Hercke®
Series 7even®products. Depending on
your installation requirements, other tools
that may be helpful include a level, power
drill and drill bits.
1
Assemble all platforms. Place platform in
the desired location. Level each platform
and make sure all platforms are level
together.
2
Assemble Overhead Storage Cases.
Select overhead cabinet placement.
Attach case using Wall Mount System or
Channel Mount System.
4
Fasten Single and Double E-Clips to
adjoin cases and drawer modules.
5
Snap door hinges to case hinge plates
and adjust door positions.
6
Attach work surface.
Chaos Defeated. Order Restored.
7
Pull platform out allowing yourself room to
get behind the platform. Assemble cases.
Stack cases and drawers on platforms in
a single stack. Add Single E-Clips to the
backside of cases and drawers. Slide the
stack back into their final level position.
3
Please read this brief overview before assembling your Hercke Series 7even system. What follows
is an outline of the order in which your assembly process needs to occur.
Assembly Instructions Overview

The drawer comes assembled. To remove the drawer from the case apply pressure to the black clips and pull the
drawer towards you.
1
2
x1pcs
Drawer Assembly
Ax2pcs
Key
Bx4pcs
E-Clip
Cx4pcs
Double E-Clip
D
PARTS
AFasten Single E-Clip which will link vertically stacked units as illustrated. (use as needed)
BLoosen screws and place clip flush with cabinet case.
CTighten screws to fasten units in place.
C C
C
A

CLEANING
AND CARE
www.hercke.com | 866.767.3905 ext.16
Please visit www.hercke.com to download these instructions in your preferred language.
Clean stainless steel surfaces using dry soft cotton cloth and stainless steel polish, buffing vertically
with the line finish of the stainless steel.
Clean painted surfaces and coated surfaces using a mild dish soap and warm water solution. DO NOT
use abrasive cleaners, glass cleaners, solvent based cleaners or furniture polish.
© Copyright 2008 Hercke International. All rights reserved. Hercke®, Series 7even®, System 7even.1®, System 7even.2®, and System 7even.3® are registered trademarks of Hercke International.
ABefore attaching doors fasten Single E-Clips and Double E-Clip which will link vertically and horizontally
stacked units as illustrated. (use as needed)
BLoosen screws and place clip flush with cabinet case.
CTighten screws to fasten units in place.
3C
C
D
D