Synergy Global Technology LCD2U17-3H-01 User manual





- 1 -
LCD2U17-3H-01
Triple Screen LCD Console Drawer
Dual Rail

1.8 Meter USB A Type cable
1.8 Meter VGA cable
- 2 -
This manual, covering various aspects of the equipment such as installation and setup,
which will help you make full use of this LCD Drawer. Please read this manual
carefully, install and operate the equipment according to the manual to avoid damage.
Product package includes following items:
1 * Triple screen LCD drawer;
1 * AC Power Cord
1 * Rack installation bracket ( one pair )
1 * USER’S manual (CD)
Please check items above. If any item is missing or damaged, please contact your dealer
promptly.
3 *
1 * 1.8 Meter DVI cable3 *
1.8 Meter Audio cable
1 *
www.RackmountMart.com

- 3 -
Table of Contents
1 Introduction …………………………………………………………………………-4-
1.1Overview…………………………………………………………………...…. -4-
1.2 Functions & Features…………………………………… ……………...…..-4-
1.3 Hardware Requirement……………………………………………..….……-4-
1.3.1 Host Requirement………………………………………………....… -4-
1.3.2 Cables…………………………………………………………...….… -4-
1.4 Product Specifications………………………………………………..….…..-5-
1.5 LCD Specifications………………………………………………….…..……-5-
1.6 Front View………………………………………………………….…..……. -6-
1.7 Rear View……………………………………………………………..….…...-7-
2 Installation……………………………………………………………………...……-8-
2.1 Rack Installation……………………………………………………………… -8-
2.3 Standard Installation……………….………………………………….…… -10-
2.4 LCD OSD Menu Setup………………………………………………..….… -11-
3 Certificates………………………………………………………………..….….… -12-
2.2 Operation…..................…………….………………………………….…… -9-
www.RackmountMart.com

- 4 -
1 Introduction
1.1 Overview
LCD2U17-3H-01 LCD integrates keyboard, 3 x LCD display and touch pad in
a drawer type worktable and provides a convenient space-saving operation mode.
1.2 Function
& Features
LCD2U17-3H-01 is 2U height, supported resolution
up to 1920 x 1200 , 75Hz. It can be
installed into19 inch rack cabinet . No need to install additional software or hardware.
1.3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) DVI, VGA graphic card
Note: the max. resolution of the integrated LCD display is 1920x1200. Make sure the
resolution of any connected computer does note exceed this resolution.
(2) USB port for keyboard and mouse.
1.3.2 Cables
(1) 3x DB-15 VGA cable male to male
(2) 1x USB A Type Cable
(4) 1x Audio Cable
(3) 3x DVI-D Cable male to male
(3) USB 2.0 Hub for peripheral USB device
With a graphic card, screen can be cloned or extended to each screen; or can display
independently. With screen extended function, people can be multi-tasking in different
screens. When operating, mouse can simly across each screen boundary.
Dual rail design allows LCD screen and keyboard tray operated independently.
www.RackmountMart.com

- 5 -
1.4 Product Specifications
Model
Brightness 300cd/m2
Contrast 650:1
Angle of visibility 140°(H),120°(V)
Color display 262K
Keyboard
Mouse
Keyboard/Mouse
DVI-D
VGA HD-15 female connector
Local Control
Terminal
USB 2.0 For USB peripheral device
Power supply
Housing Metal housing
Weight 18.5Kg
Dimension(W x H x D)
104 keys
touch pad mouse
100-240V AC 50/60Hz via IEC Type power cord
443 x 88 x 580 mm
24 pin DVI-D female connector
USB 2.0
Video resolution native 1920 x 1080 (support up to 1920 x 1200)
(Master)
DVI-D
VGA HD-15 female connector
Local Control
Terminal 24 pin DVI-D female connector
(Slave 1)
Audio 3.5mm stereo jack
DVI-D
VGA HD-15 female connector
Local Control
Terminal 24 pin DVI-D female connector
(Slave 2)
www.RackmountMart.com
LCD2U17-3H-01

- 6 -
1.6 Front
View
NO Part Function Description
2 LCD
display
3 Keyboard
4 Touchpad
2
3
4
6
1
5
5 LCD OSD button
6 Mounting bracket Install into rack cabinet
7 Lock button Auto lock / release when lcd pull up and down
LCD button to control Screen Display position and
image setting.
8 USB2.0 HUB port
8
1 Handle to adjust screen tilt; lock/release rail sliding
www.RackmountMart.com

- 7 -
1.7 Rear View
No Component Function Description
1 AC Power port Standard IEC Type AC Inlet
2 Power Switch Rock switch, turn on/off equipment main power.
3 Audio port For audio function
4 VGA port Connect to server or KVM.
5 USB port
6 DVI port Connect to server or KVM.
7 USB 2.0
1 2 34
5
Connect to server or KVM.
677
For USB peripheral device
4
6
No Component Function Description
www.RackmountMart.com

2 Installation
2.1 Rack
Installation
- 8 -
Front mounting bracket (L&R)
Rear mounting bracket (L&R)
■Rear mounting bracket, screw M6 *4pcs
Step 1
Back View
Step 2
Front View
■Insert the left and right front mounting brackets into
rear mounting bracket, screw M6 * 4pcs
■Slide KVM into mounting bracket
Step 3
Front View
■Screw M4 *2pcs at Point B
Step 4
Front View
■Screw M4 *4pcs at Point A
www.RackmountMart.com

2.2 Operation
■
Step 1
Unlock handle C to release rail locker and slide out
■
Use locker D to stable the rail
Step 2
After operation
■Lift up LCD panel
■Hold Point E to open the left panel
Step 3
■Hold Point F to open the right panel
Step 4
- 9 -
■Slide out keyboard tray when needed
Step 5
■Based on step 5 --- 4 --- 3 --- 2 to put away
Step 6
keyboard tray and LCD panels
■
Unlock locker D
■
Use handle C to lock into cabinet
www.RackmountMart.com

- 10 -
2.3 Standard Installation
Please follow the installation drawing and instructions below for standard installation:
* Please Shutdown the Power of Equipment Needs to be Connected
* Please Pay Attention to Earthing of Equipment
The standard installation is completed, and LCD KVM console can be powered on. Then
power on connected hosts.
Demonstration of Different Display Mode
Extend
Clone
Independent
www.RackmountMart.com

- 11 -
2.4 LCD OSD Menu Setup
OSD Control buttons
LCD OSD can establish and setup LCD display. Setup instructions of four buttons are as
follows:
Button Functions
POWER Turn on or off the LCD Display
MENU Activate OSD menu, select a menu and press MENU key to confirm the
selection and enter the submenu.
▲Press this key to increase setting or scroll up the menu bar
▼Press this key to Decrease setting or scroll down the menu bar
AUTO
OSD Control Operation
Main Menu
press the auto key to select video source
www.RackmountMart.com

- 12 -
3 Certificates
FCC
This product has been tested and is proved to meet requirements of Grade B electronic
devices and specifications of Section 15 of FCC certification. Please observe following two
conditions in operation that:
(1) The equipment will not generate any harmful interruption.
(2) If the equipment is interrupted, it may cause unnecessary operations.
CE
This equipment complies with regulations of EN55022:CLASS B.
RoHS
The whole package including products, packaging materials and documents meet RoHS
equipments.
www.RackmountMart.com
The company reserves the right to modify product speciÞ cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2022 Synergy Global Technology Inc. All rights reserved.