Herman Miller Vivo User manual

Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2gl9 rev L.
1
YVivo®Stacking Frame Installation and Disassembly
for Recycling Instructions
Parts Included:
Stacking Frame
Rachet 7/16” Socket 9/16” Socket 9/16” Wrench Torque Wrench
A
1/4-20 X 3/8 Pan Head
Taptite Screw
Washer (2)
3/8 - 16 Hex Nut
Light Block Adapter Plate (2)
(for use on 42” frames only)
3/8 - 16 Hex
Head Cap Screw
Hardware Pack
Hardware Pack
B
D
E
G H
F
Tools Required:
Safety Glasses

Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2gl9 rev L.
2
2. Insert mounting brackets on stacking frame
into slots in top rail of wall frame.
1. Remove wire channels
from frame.
Wire Channel
A
Mounting Bracket
Mounting Bracket
Wall Frame
Slot
Slot
Assembly Instructions:
For Stacking Frames Manufactured Prior to August 2019

Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2gl9 rev L.
3
3. Secure stacking frame to wall frame with
(6) screws(B). For 42” wall frame; position
adaptor plate(H) into window in frame
before installing washers and screws. For
42” application, install screw in frame slot
followed by hole in bracket and slot in
bracket.
4. Important: Tighten Screws Securely.
(42” Wall Frame only)
Window
B
B
BB
B
H
B
5. Insert Mounting Brackets into slots in top
rail of wall frame.
Wall Frame
Mounting Bracket
Slot
Slot
Mounting Bracket
Fingers
For Stacking Frames Manufactured After August 2019

Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2gl9 rev L.
4
When Mounting Bracket Fingers touch
slots on Wall Frame, slightly rotate stacking
Frame and insert Mounting Bracket Finger
on one side into slot.
With one Mounting Bracket Finger engaged
in wall frame slot, rotate Stacking Frame to
vertical position while continuing to insert
2nd Mounting Bracket Finger into Slot. Fully
Seat stacking Frame onto Wall Frame.
6. Secure Stacking Frame to wall frame
with (4) screws (B).
Wire Channel
7. Important: Tighten Screws Securely.
8. Reinstall wire channels on top of stacking
frame.
Mounting Bracket
Finger
B
B

Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2gl9 rev L.
5
9. Make frame to frame connection with light
block sandwiched between frames. Install
cap screw (2) washers and hex nut in top
hole.
10. Important: Torque Screws to 200 in-lbs.
11. Use product FT122. to connect
joining stacking frames.
12. Important: Torque Screws to
200 in-lbs.
F
D
D
E
G
Washer
Hole
Top Connector
Tube
Screw
Screw
Screw
Washer
Washer

Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2gl9 rev L.
6
Disassembly for Recycling:
Materials Identication and Segregation:
Where possible, plastic components are marked with ASTM recycling codes.
Use these codes to identify material type for recycling. Non marked components
should be treated as mixed plastic. Ferrous metals can be identied using a
small magnet for recycling. Non-ferrous metals should be separated and recycled
separately.
To disassemble product, reverse steps 12 through 1.