Herman Miller Avall User manual

audio visual solutions
Installation instructions for audio visual stand
www.colebrookbossonsaunders.com
AVALL-INST-D MAR 2009

1AVALL-INST-D MAR 2009
Free standing with feet
Dual screen mount
Free standing with castors
Camera mount
AVS/002/GA03
AVS/002/GA04
AVS/002/GA02
AVS/002/GA15 AVS/002/GA07 AVS/002/GA08
AVS/002/GA14
Wall mounted*
Front panel-plain Front panel-perforated
Base Wall mount *
CastorsAdjustable feet
AVS/002/GA12 AVS/002/GA11
Double screen mount
Single screen mount
Shelf
AVM/001/B
* NOTE: wall mount option available soon
AVM/001/B
AVS/002/GA10
Rear panel
AVS/002/GA01
Column
AVALL DIAGRAM WITHALL COMPONENTS
AVM/001/B

2AVALL-INST-D MAR 2009
BALANCE
SOME IMPORTANT PRECAUTIONS
LEVEL

3AVALL-INST-D MAR 2009
100 mm
3”
85mm
3 ⅜”
490mm
19 ⅜”
380 mm
14”
920 mm
36 ¼”
110 mm
4 ⅜”
580 mm
22 ⅞”
350 mm
13 ¾”
Internal Equipment Space
SOME IMPORTANT PRECAUTIONS
IMPORTANT NOTE
Remember to support
back panel when
unlocking to prevent
it falling.
IMPORTANT NOTE
Beware of trapping
fingers when closing
base cover.
IMPORTANT NOTE
Apply brakes at all
times (Unless Avall is
being moved)

4AVALL-INST-D MAR 2009
Fit castors to base
2a Release cover
x2 x2 x16
1Fit adjustable feet to base
1
x4 x16
OR
1
1 2
WARNING
1 2 1
NOTE
If AVALL is to be wall
mounted see instruction
in wall-mount kit.
IMPORTANT NOTE
Braked castors fitted
to rear of base.

5AVALL-INST-D MAR 2009
2b Remove cover
3Set column supports
4Fit lower columns
x2 x2
UNLOCK
IMPORTANT NOTE
DO NOT FULLY TIGHTEN

6AVALL-INST-D MAR 2009
5a Fix lower columns
5b
5c Install column connectors
x2
x2 x2
x2
x2 x2
UNLOCK
x2
TIGHTEN
TIGHTEN
min 150 mm
OPTIONAL ACCESSORY
AVS/002/GA15
If installing Avall Shelf do so at this stage.
See separate shelf instructions.
Install accessory rail

7AVALL-INST-D MAR 2009
5d Fix column connectors
x2 x2
TIGHTEN
6a Install & fix upper column
x2 x2
TIGHTEN
1
2
3
6b Tighten column fixings
IMPORTANT NOTE
PLEASE TIGHTEN SECURELY
1 2

8AVALL-INST-D MAR 2009
7Prepare front panel
8
9
Install front panel
x2
x2
FOR SINGLE SCREEN MOUNT GO TO STEP 10 FOR DOUBLE SCREEN MOUNT GO TO STEP
OR
OPTIONAL ACCESSORY
AVS/002/GA14
If installing Camera Mount do so at this stage.
See separate Camera Mount instructions.
IMPORTANT NOTE
CHOOSE DESIRED FIXING POSITIONS
TO SUIT ACCESS AROUND INTERNAL
EQUIPMENT

9AVALL-INST-D MAR 2009
9Fix AVM on AVALL
x4 x4 IMPORTANT NOTE
PLEASE SEE INSTRUCTIONS AVM/001
PLASMA/LCD SCREEN MOUNT
Heavy load
2
1
3
4Mount monitor
MAX
50kg/110lb
IMPORTANT NOTE
ALWAYS USE ALL 4 FIXINGS
2 people required
to mount screen

10 AVALL-INST-D MAR 2009
10 Fix double AVM on AVALL
x2 x16 x16 x16 IMPORTANT NOTE
PLEASE SEE INSTRUCTIONS AVM/001
PLASMA/LCD SCREEN MOUNT
MAX
50kg/110lb
MAX
50kg/110lb
5
2
1
4
3
Mount monitors
IMPORTANT NOTE
ALWAYS USE ALL 8 FIXINGS
IMPORTANT NOTE
ALWAYS USE ALL 8 FIXINGS
Heavy load
3 people required
to mount screens
WARNING
Support
stand until
both screens
are mounted

11 AVALL-INST-D MAR 2009
11 Re-fit the base cover
12 Install lock plate
LOCK
1
2 3
1
x2 x2
2
13 Assemble back panel
x3 x3x3

12 AVALL-INST-D MAR 2009
15 Install back panel
16 Fine adjustment of lock panel
14 Fit lock to back panel
1 2 3
IMPORTANT NOTE
Key must be inserted in
lock to close back panel
USEFUL TIP
If necessary, adjust position
of lock plate to ensure
correct latching of lock
click!

13 AVALL-INST-D MAR 2009
17 Fitting cable strain relief
WARNING English
ELECTRICAL SAFETY
MAINTENANCE and INSPECTION
PATENT and REGISTRATION
•Correct installation is essential to safe and reliable operation of the AVALL product and falls outside the scope of responsibility of Colebrook Bosson Saunders. Please follow assembly instructions carefully.
•Do not use this product for any purpose other than that for which it was designed.
•Ensure that floor or wall surface is strong enough to support the weight of the fully-loaded AVALL and that the floor surface is flat and level.
•Do not install AVALL outdoors or in environments where it will be directly exposed to moisture or high winds.
•Do not install monitors / displays heavier than 50kg/110lb. Total weight of installed equipment must not exceed 100kg/220lb, symmetrically distributed.
•Follow the manufacturer’s guidance for mounting of monitors, displays and other equipment.
•Please take care to avoid trapping fingers when installing or adjusting the product.
•Safe installation of electrical equipment is the responsibility of the installer.
•Colebrook Bosson Saunders recommends that only double-insulated electrical equipment and cables are installed in AVALL unit.
•Ensure all screws and fixings are fully tightened and occasionally re-tighten if necessary.
•Clean with a damp cloth. DO NOT use solvents.
•Patents and design registration applied for.
1 2 3
1
2
4
USEFUL TIP
If installing electrical extension
leads, use of cable strain relief
is recommended
IMPORTANT NOTE
•Safe installation of electrical equipment is the
responsibility of the installer.
•Colebrook Bosson Saunders recommends that
only double-insulated electrical equipment
and cables are installed in AVALL unit.
x4x2 x4