hernest H100589 User manual

Caution
To reduce the risk of injury and damage, before you commence the assembling of the product, please note:
Make sure all fittings and parts can be found.
Choose an area that is large, flat, and clean enough for the assembling work to avoid potential damage.
Work in a pair or group to hold some parts in place for convenience and safety concerns.
If you and your helpers are not skillful enough for such work, please consult someone professional for the job.
Stay careful about your force and power to avoid damage to the assembling parts.
USER MANUAL
1
Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product, and have this user manual well-reserved for
future need.
SKU:H100589
Rotating Drawer Cylinder Storage Makeup Vanity

2
Align the metal frame(B) to the edge of
the dressing table(A) at its bottom; Use 3
small self-tapping screws(H) to fix the
metal frame to the dressing table with
relevant tools(not included).
Installation Steps
1
Turn the fixed metal frame and dress table
back upright, and install the side cabinet(C)
to the dressing table under the other side of
the dressing table(A) partially. Turn around
the drawer to align the holes and tighten 2
medium self-tapping screws(I) to secure the
cabinet to the table with tools.
2
Install the mirror fixture(F) onto the table-
top of the dressing table at the shown
place. Remove the wooden frame in the
drawer of the table. Insert the bolt(J)
through the hole in the drawer and fix the
drawer handle(G) to the drawer by tighten-
ing the bolt.
3
Install the mirror to the mirror fixture.
Insert the bolt(J) through the hole in the
cover plate and fix one knob(G) to the
plate by tightening the bolt with tools.
4

Maintenance & Care
Avoid leaving the furniture in a moist, poor-ventilation place to prevent bulging and erosion; And also avoid
exposure to strong sunlight to prevent color fading and distortion.
Wooden components should not be exposed to straight sunlight or moisture in the prevention of mold, loosening,
or distortion. Wooden surfaces requires frequent dust cleaning, please use a dry soft cloth for the wiping.
Leather surfaces needs to be kept clean by using cotton cloth to the dust off the surface. you can extend the
product's longevity by applying leather cleaner once a month. Do not use water for rinsing if the product gets
stained, but wipe it with a dry cloth and leather cleaner instead.
The fabric materials should be cleaned with a neat cotton cloth. If stained by liquid, use a soft cotton cloth to drain
and remove the liquid, and the remaining part can be wiped out by detergents with a dry cloth.
Metal components can be kept bright and glossy by using gauze with anti-rust oil to wipe the product's finish;
Be cautious and avoid staining with any corrosive chemicals, like sulfer acid, vinegar or soda,If it happens,rinse it
with water and dry with cotton-cloth.
3
For more detail information, please check out www.hernest.com
It will be our pleasure to have your visit.
www.hernest.com
After-Sale Service
If you have any issues with the product, please feel free to contact us online or by phone for customer service.
Phone Number: [phone]
Service E-mail: [email protected]om