Installation
Process
1. Charge the Dashcam for 3 hours before Installation. You can use
your mobile charger to charge the same.
2. Clean the Windshield area where the Dashcam is to be installed.
3. Remove the Protective Film from the Double Sided Adhesive
and attach it on the windshield such that the view of the Driver is
not blocked and proper view of the Front in correct orientation is
present.
4. Attach the USB Cable with the Dashcam and with the help of
Installation Tool/Pry tool you can tuck In the Cable properly by
lifting the Windshield/ molding.
5. Connect it with the Power Adaptor and insert the adaptor into
car 12V charger socket. Please insert SD Card in the SD Card slot
for proper installation of the Device. Please use a Class 10 or above
SD Card.
6. Turn on the Car Ignition and check if the Dashcam gets a Red LED
Indication. Device then announces that “Qubo Dashcam is ready for
Setup.” Download the App and follow further steps from the App.
Note: We recommend to first install the dashcam and then mount it on
the Windshield for your convenience.
Ideal mount area
Tuck-in cable
