heysong BUBBLE User manual

HEYSONG BUBBLE
SPEAKER
TAKE HEYSONG! GET MORE FUN!

THANKS NOTE
SPECIFICATION
PACKAGE CONTENTS
Dear Sir or Madam
Thank you for choosing HEYSONG BUBBLE!
We are committed to becoming a world-class brand, enabling more
people to enjoy higher quality music at a lower price. We can not achieve
the goal without your support. For us, you are not only a user, but also a
designer who can make the product better. If you have any problems
while using, you please consult our customer service team, we will
solve the problem for you as soon as possible! We will try our best
to improve the product and your using experience. Thank you again.
Best Wishes
To make the most of the features of the speaker, we recommend you
take a brief look at this instruction manual before using.
Dimensions：L 102 * W 93 * H 43 mm
Wireless Working Frequency：2.402-2.480 GHZ
Wireless Transmission Distance：Up to 10m
Weight：175g
Charging：5V, 600mA
1. Bluetooth Speaker 3. User Manual
2. USB Charging
Cable 4. Carabiner

WATERPROOF
IMPORTANT SAFETY PRECAUTIONS
HEYSONG BUBBLE is rated IP67, which means the speaker can be
heavily splashed with water, it can even submerge into water of one
meter depth for 30 minutes. If the speaker gets wet, you better dry up the
speaker before using it again.
Note: Please ensure that the silicone case cover is closed and secure
when using the speaker in a wet environment.
When using your Speaker, You should follow some basic safety
precautions:
1. Keep this product and its charging cable away from excessive heat.
2. Do not charge this speaker with a damaged charge cable. Please try to
use the original charging cable in the package to charge the speaker.
3. Do not disassemble your device.

CHARGING YOUR SPEAKER
1. Connect one end of the included USB Charging Cable to the Charging
Port on your speaker, plug the other end of the USB Charging Cable
into a suitable USB port on your computer to recharge your speaker's
internal rechargeable battery.
2. When charging, a red LED light will illuminate to indicate that your
speaker is charging.The red light will turn off when your unit is fully
charged.
Tips:
1. You will hear a " low battery" prompt when battery is low and needs
to be recharged.
2. To protect the battery's durability, fully charge the speaker if it is not
used for a long time.
3. The internal battery of your speaker takes approximately 2~3 hours
to be fully charged.

OPERATION GUIDE
Power ON/OFF
Stereo Pairing
Indicator Light
Pause
Handsfree Call
Volume Up
Previous Track Volume Down
Next Track
Built-in Mic
1. Power ON/OFF
Press and hold the “ ” for power on
Press and hold the “ ” again for power off
Short Press the “ ” while the power is on to enable the True
Wireless Stereo pairing.
2. Previous: Press and hold “ ” to access the previous track in playlist.
Short Press “ ” to lower the volume.
3. Next: Press and hold “ ” to access the next track in playlist.
Short Press “ ” to increase the volume.
4. Press “ ” to play or pause a track.
You can also press this button to pick up the call.
5.Light Button
Long press " “and“ ” to cycle light mode.
6. Please stay close to the microphone jack when speaking, preferably
less than 0.5m away.

To pair your Bluetooth audio device to your Bluetooth Speaker for the first
time. Please follow the steps below：
1. Make sure your Bluetooth device is held within three meters of your
speaker.
2. Press and hold the " " button for 3 seconds to turn on your speaker.
It will go into pairing mode, and the blue indicator will keep flashing.
3. Activate Bluetooth on your device and search for other devices. Once you
have found "HEYSONG BUBBLE” on your Bluetooth device, click it for
pairing.
Note:
1. This speaker will pair with the last connected device when that device is in
range.
2. The speaker will be turned off if no device has been paired for more than
10 minutes.
Pair HEYSONG BUBBLE with Your
Bluetooth Device
TWS FUNCTION
If you have two of HEYSONG BUBBLE, you can use the following steps
to achieve wireless stereo pairing.
1. Power on both speaker and make sure your speakers are not connected
to other devices yet.
2. Press “ ” button on one of the speakers, the two speakers will connect
automatically with indicated tone. You will see a blue LED blinks quickly on
one unit and solid blue LED on the other one.
3. Search Bluetooth device on your audio source and select "HEYSONG
BUBBLE."
4. When your speaker is successfully paired with the audio source, the
indicator light will remain solid blue.
5. Long press the “ ” button on one of the speakers to disconnect the TWS
connection.
6. Long press the “ ” button again on one of the speakers to disconnect the
Bluetooth from the device.

TROUBLESHOOTING
Frequently Asked Questions Solution
A prompt “ low battery" heard
every few seconds
Bluetooth connection distance
cannot reach to 10m.
The speaker will not power on
The speaker doesn't control
tracks/ volume
Speaker needs to be charged.
Speaker needs to be in
Bluetooth mode for full control.
The signal is blocked by
obstacles such as multiple
walls, avoid operating the
Bluetooth speaker in areas
with strong electromagnetic
interference, such as induction
cookers, high-power fans,
motors, etc. Move the speaker
close to the Bluetooth device,
fully charge the speaker and try
again.
Speaker needs to be charged.