Hi-Target Qstar Series Installation instructions

Qstar series high precision mobile GIS
product specification instruction

Handbook revision situation
Revision date
Revision times
introduction
2012.8
1
Qstar series high precision
mobile GIS product
introduction V1.0

Preface
Use of the introduction
Welcome to use Qstar series high precision mobile GIS product introduction, this manual applies to
Q star series, this manual introduced how to set and use Qstar series high precision mobile GIS
product.
Specification of the introduction
Qstar series high precision mobile GIS product is a new GPS/GIS data collector, even if you have
used other types of industrial GIS data collector, please carefully read this instruction before use
Experience demand
In order that you can better use Qstar series high precision mobile GIS product, Hi-Target suggests
that you have a certain knowledge of measures or GIS, and carefully read this manual. If you have
any questions, please refer to the official website of Hi-Target: < http://www.hi-target.com.cn >.
Safety technical note
Responsibility absolution
Before you use the product, you should read the introduction carefully. Hi-Target surveying
instrument Co., LTD. will not take the responsibility if you do not operate within the product
instruction。
HI-TARGET surveying instrument Co., LTD. is committed to continuously improve product
function and performance, improve the service quality, and keep the right to change the content of
the instruction without noticing in advance.
We have checked that whether the hardware and software are consistent with the content as the
prints say, but we don't rule out the possibility of bias, the picture in the instruction for reference
only, if you have a product with discrepancies, please refer to the product.
Technology and service
Hi-Target have set up the “technology and service” section in website , if you have
problems you can settle them through the "service guide" telephone 、contacting regional
technology center and headquarters division or through the "experts on the judgment
seat," "technology BBS" message, we will answer your questions as soon as possible.
Note: pay attention to the suggestive content, it is generally special place, need
to draw your special attention, please read it carefully
Warning: the content of the warning is generally very important hints, if not
operate within the warning content , it will cause the damage of instrument,
the loss of data, and the collapse of the system, and even endanger personal
safety.

Related information
You can find the instructions through the following methods:
1 Purchased products from the Hi-Target will with a CD, open the CD and you can find
the instruction;
2 Land the official website of the Hi-Target, through "downloaded zone"—" product
specifications "—" GIS product "and you can it.
Your suggestion
If you have any suggestions and opinions about the introduction, please visit the official
website of the Hi-Target, and leave massage in "technical service" —"advice and
complaint" edition , your feedback will help to improve the quality of the introduction
greatly .

Chapter 1
Products overview
This chapter introduces:
■Product introduction
■Product features
■Matters needing attention in use
Product introduction
Qstar series high precision mobile GIS products are equipped with complete navigation
and position function and GIS data acquisition function, with the operating mode of
physical buttons and touch screen, inputting in both Chinese and English are supported. It
is designed as industrial standard, and can be dropped from 1.5 meters high to the cement
floor without anything, equipped with IP67 level dustproof and waterproof, it can adapt
to complex work environment in the field. At the same time, the configuration of the
large capacity of lithium battery can meet the requirements of all day work.
Qstar series high precision mobile GIS products are integrated designed, and it is
equipped with functions such as GPS, embedded Windows Mobile 6.5 system, digital
camera, microphone, 3 G communications, bluetooth communication, large storage, USB
port, SD card expansion ,etc.
Product features
◊Industrial integration design, with a variety of functions
C H A P T E R
1

◊Can be used as the industrial three proof standard GPS navigation
◊The built-in digital camera, which can realize image information site acquisition,
automatically realize GPS coordinates and image information matching labeling
◊The built-in microphone, it can realize voice information site collected
◊with the function of speech play
◊The built-in bluetooth , to realize the wireless data transmission
◊Integrated industrial 3 G wireless communication. Realizing the communication
between management center and mobile GPS terminal.
Use and the matters needing attention
Although Qstar series high precision mobile GIS products use the corrosion resistance
and impact resistance materials, but the instrument still need our careful use and
maintenance, and keep it in dry environment as far as possible. In order to improve the
stability of the Qstar series high precision mobile GIS products and use cycle, please
avoid Qstar series high precision mobile GIS products exposed to extreme environments ,
such as: damp, high temperature, low temperature, corrosive gas or liquid, etc.
To ensure continuous observation of the satellite and satellite signal quality, the stations
should be set over the open place as far as possible, barriers are not permitted in more
than 15 degree; To reduce the interference of electromagnetic wave to GNSS satellite
signal ,within 200 m strong electromagnetic interference is not permitted, such as TV
tower, microwave station, high voltage transmission line; To avoid or reduce the
happening of the multipath effect, stations should be far away from to the terrain which
reflect electromagnetic wave signal strongly, such as high building, sliced waters, etc.
Warning: Qstar series high precision mobile GIS products must be
preserved and used within stipulated temperature range. Detail
requirements, please refer to chapter 4: technical parameters.

Chapter 2
The introduction of Qstar series high precision
mobile GIS products
The introduction of this chapter:
■the front of Qstar series high precision mobile GIS products
■the back of Qstar series high precision mobile GIS products
■Interface
■touching pen
■battery
■data cable
■belt
This chapter introduces Qstar series high precision mobile GIS products
appearance, interface, battery, touch pen and data cable, etc.
The front of Qstar series high precision mobile GIS products
The front of Qstar series high precision mobile GIS products
，including the touch screen, keyboard, a microphone，protection set ,etc.
C H A P T E R
2

◊Touch screen:3.7 inch vertical screen can do click operation directly, support inputting
in both Chinese and English.
◊Protective set: in case that it grind 、fell and shock, effective to avoid instrument
scratching.
◊Keyboard: direction control, the confirmation button, exit button, switch machine etc.
◊The microphone: built-in microphone can be used for the acquisition of voice
messages.
The back of Qstar series high precision mobile GIS products
The back of Qstar series high precision mobile GIS products
, including the camera, battery, the belt hole, horn, etc.
◊Camera: built-in digital camera for video information site collection
◊Battery: the built-in 3.7 V, 8800 mAh lithium batteries
◊Belt : connect the strap to prevent slide.

◊Horn: instrument real-time operating state and speech broadcast
Interface
Qstar series high precision mobile GIS products interface position is identified, its main
function is charging and data transmission, installing SIM card and SD card, etc.
Picture2-3
◇Charging interface:connect the charger for lithium battery charge.
◇USB interface :the connection computer, used for data transmission.
◇SIM card socket:to install SIM card
◇MicroSD card slot: it can be installed MicroSD card, can support 32 GB at most.
Touching pen
Qstar series high precision mobile GIS products touching pen is equipped with standard
configuration, located in Qstar series high precision mobile GIS products belt .
Note: when the horn is in water, it may appear silent or husky, dry it and it
will be back to normal. The loudspeaker and the instrument is completely
waterproof, horn with water will not affect instrument performance, but please
timely dry it..
Note: when the charging interface and USB interface are not in use, please
cover the stopper, in order to achieve the purpose of waterproof, dustproof.

Picture2-4
Battery
This illustration shows the standard 8800 mAh lithium battery appearance figure.
Picture2-5
Data cable
Picture2-6
◇Qstar series high precision mobile GIS products interface: used in connection of USB
with Qstar series high precision mobile GIS products.
◇USB interface: to connect computer USB port , used for data download.
Notice: In order to protect the environment, when the lithium battery
failure, do not throw them away, please return to Hi-Target or
professional battery recycling units processing.
Warning: when the cable is not in use, it should be packed in where the place
is not easy to squeeze to prevent damage to the plug.

Belt
Because Qstar series high precision mobile GIS product is big, in order to prevent sliding
in the process of working, it is equipped with antiskid belt, please entangle belt when
you work .
Picture2-7

Chapter 3
Basic operation
The introduction of this section:
▇keyboard
▇Touching pen
▇3G card
▇MicroSD card
▇Power supply system
▇Switch machine operation
▇data obtain
▇Application functions
Most of the Hi-Target Qstar series high precision mobile GIS products setting and
operation can be completed by touching pen , the common operation can be completed by
the keyboard . Now we will introduce the appearance and function of the keyboard
simply.
Keyboard
Qstar series high precision mobile GIS products keyboard. The keyboard keys contains: the
confirmation button , exit key, F1 function keys, switch machine key and the direction key.
Figure 3-1
“ESC”exit button: short press it on boot-up state, means to cancel or exit the current
C H A P T E R
3

window operation.
“ENT”Confirm button: ok button.
Switch machine button/backlight control button: long press it for more than 3 seconds
to turns on/off it. On boot-up state, hold the button for 1 second, switch on or off the
backlight .
Navigation button: move the cursor, to choice the options content.
3G card
3 G card can support data communication current, it can equipped with voice mobile phone
model optional.
MicroSD card
Can be used for storage of the collected data and program files. Program installation package can
be installed to program MicroSD card, just as installed in system disk space.
Power supply system
◊The battery installation and removal
Install the battery, contact the battery with a metal connector on one end with Qstar series high
precision mobile GIS product battery jar copper point, and screw up the screw.
Notice: when Qstar series high precision mobile GIS product is not in work
temporarily, please close a backlight to save electricity, to extend industrial
GIS data collector work time.
Note: the MicroSD cards (also named TF card) are small volume external flash memory
storage expansion CARDS, usually used in mobile phone, PDA, users should distinguish it
between the common SD card. The volume of ordinary SD card are larger than the
MicroSD card, not suitable for Qstar series high precision mobile GIS product .
Qstar series high precision mobile GIS product can support 32 GB MicroSD card at
most for present.

Take out the battery, take out the screw firstly, the battery will popup little, then you can take it out.
◊Qstar series high precision mobile GIS product battery, charger model number
Table 3-1 Qstar series high precision mobile GIS product battery, charger model
name
model
8800 mAh lithium batteries
BL-8800A
Lithium battery charger
CL-00A
◊charge
When charging, the charger should be specialized charger with standard configuration or seat
charger in certain temperature range, and charging time should achieve a certain requirements.
The concrete use method and requirements:charging with standard configuration is demanded
when charging the Qstar series high precision mobile GIS product,charge in 10 ℃~ 40 ℃
temperature range. Using for the first time in general, there should be some battery power, you
should use up the inside electricity before charging again, the first three charging must achieve12
hours, after that charging 6 hours. If the battery is not often in use, it must be charged once a
month.
Switch machine operation
◊Boot
In the shutdown state, long press three seconds, it will boot.
Warning: 1The battery and charger manufacturer configuration are only permitted, do
not put it into the fire or metal electrodes with short circuit.
2 If you find the battery has fever, deformation, discharge, smell or other abnormal
phenomenon when the battery is in use 、in charge or in storage, please replace new
battery.
3 If the use time of the battery significantly shortened, please stop using the battery,
the battery is aging, please replace new battery.

Figure 3-9
◊shutdown
On state, long press 3 seconds, it will tip you to confirm shutdown, click on the "shut
down".
Figure3-10
Network connection
Click "start" - > "DialConnect", if you have set up dial-up parameters, click "dial-up connection",you
can direct dialing. If you did not click "new connection", then click "dial-up connection".
For successful dial-up network, you can click "disconnect" to close the connection.
Tip: after the successfully dial-up ,don't click on the top right corner "OK" button, click on the top
left corner "start" to do other operation

Data obtain
1 Install Microsoft ActiveSync
In the incidental disk (tool software \ connection program \ ActiveSync), double click MSASYNC45.
exe file, please follow the instructions to complete installation. After the installation, find
Microsoft ActiveSync and operate it in the "start menu" "program" .Set up "allows the USB
connection" In the menu "connection Settings", as shown in figure 4-21.
Figure3-11
2 The hardware connection
First，switch on Qstar series high precision mobile GIS product, enter the Windows system,
it is no need to open applications. Connect the USB port which with a smaller cable line with the
Qstar series high precision mobile GIS product , connect the other end USB plug with your PC.
3 Software connection
When the cable is connected ,the Microsoft ActiveSync in the computer will tips you "whether
need to establish cooperation relationship," choose “cancel”， Then Microsoft ActiveSync popup a
hint, click "ok"。Then it has been connected successfully. If it is the first connections, the computer
will tips you to install the driver, just installed Windows compute driver according to guide.
4 download data
Click on the“browse button”of the Microsoft ActiveSync, open the resources browser of Qstar
series high precision mobile GIS product ,you can enter the related file and copy data to the
computer.
Application functions
Qstar series high precision mobile GIS product is equipde with PPP technology (the
technology used in Qmini MP model), built-in GPS navigation and positioning, digital camera,
microphone, 3 G communications (this function is optional), and other functions, but it must be
installed with the corresponding software. Qstar series high precision mobile GIS product is
equipped with Hi-Q software, as to how to use Hi-Q software to operate of the application functions
above, please refer to my company's "Hi-Q software operation instruction" content.

Chapter 4
Technology parameters
The introduction of this section
Technology parameters
Technology parameters
This chapter will introduce you related parameters of Qstar series high precision mobile GIS
product, the product function will vary according to the different models. When you refer to this
chapter, please refer to corresponding technical parameters according to the equipment you
purchase.
\
model
System configuration
Operating system: Windows Mobile 6.5
√
√
√
√
√
806MHz high-speed CPU
√
√
√
√
√
Memory: 256MB RAM
√
√
√
√
√
Flash memory:8GB
√
√
√
√
√
Screen: 3.7 inches color touch screen, 640 x
480 resolution
√
√
√
√
√
GPS characteristics
High sensitivity GPS positioning technology
√
√
√
√
√
GPS+GLONASS binary star positioning
technology
Support SBAS（WAAS，EGNOS，MSAS）
√
√
√
√
√
Positioning time for the first
ime:30second(typical)
√
√
√
√
√
Positioning accuracy
Point positioning:5 m
√
√
√
√
√
SBAS:1-3m
√
√
√
√
√
application function
The built-in 3 G communication module, a data
communication function
√
√
√
√
The 3 G communication module, with mobile
C H A P T E R
4

phone voice calls function
5 million pixel camera with LED the fill light
√
√
√
√
√
Integrated microphone and speakers
√
√
√
√
√
The built-in RFID writing and reading modules
√
The built-in bar code scanner
√
Data communication
Bluetooth:bluetooth
√
√
√
√
√
Interface: Mini USB interface
√
√
√
√
√
WIFI: 802.11b/gWireless local area network
√
√
√
√
√
Storage: Micro SD card slot, 32 G at most
√
√
√
√
Power performance
Standard configuration 3.7 V, 3100 mAh lithium
batteries
Can work continuously over 12 hours support
online charge
√
√
√
√
√
Physical properties
Key: 10 buttons, with four the direction key and
shortcut key in the side
√
√
√
√
√
Size:14cm×8cm×3.5cm
Weight:360g(contain battery)
√
√
√
√
Work temperature: -30 ℃～+70 ℃storage
temperature:- 40℃～+80℃
√
√
√
√
Dustproof waterproof:IP67
√
√
√
√
Shockproof: Resistance to 1.5 m free fall
√
√
√
√