Hi-Touch Imaging Technologies S400 Installation instructions

HiTi S400 Digital Photo Printer Bluetooth Dongle User Instruction
Step 1:
Insert a Bluetooth Dongle into the USB slot.
The Bluetooth Dongle used here is a
PLANEX BT-01UDE Bluetooth V .0.
Step 2:
Select your output format (S400 only supports photo, stickers and collage printing
when using Bluetooth)Here we will use [PHOTO] output format. Press [OK] to enter
Bluetooth Mode (3rd Photo).
Step 3:
Referring the procedures of your Bluetooth device (Bluetooth cell phone, PDA, etc.)
and transfer an image to HiTi S400 via Bluetooth. Here a Nokia 7610 is used for
demonstration:
[Select an Image [Choose Bluetooth [Select HiTi S400 [Transfer Complete

Step 4:
Edit the image (if necessary) and select [OK] to print.
Step 5:
Wait around 60 seconds for your print.
Note:
When performing collage printing, or printing 4x4, 4 4 stickers using Bluetooth, the
image transferred will automatically be placed into all image columns. Only one
image source per print is allowed.
4 4 Sticker 4X4 Collage

Compatibility Information:
HiTi S400 F/W: F/W version 1.04 or above
Bluetooth Dongle: Bluetooth V1.1/V .0 Class
Tested Bluetooth Devices: Nokia 7610, SE K700i, Moto V600. Dopod 818/8 8, HP
iPAQ 450.
Tested Bluetooth Dongles: PLANEX BT-01UDE V .0. Epox DG03 V1.1.
Known Problem: Incompatibility with Nokia 8800 (RD is working on a solution)