Highland ID305 User manual

INSTRUCTION
MANUAL
Highland Tufted Velvet Side Chair
SKU: ID305
V1.0

CARE & MAINTENANCE
HARDWARE
PARTS
AB
Page 1 of 4
△
△
1
4
2
5
3
4
M8x55MM
Flat washer
13PCS
Lock washer Allen Key
Shorter
Screw
13PCS 1PC
9PCS 4PCS
Back
1PC
Clean the dust with a soft cloth
Do not store in extremely wet environment.
C
Front Legs with
Adjustable Feet Leveler
2PCS
M8x60MM
Longer
Screws
Seat
Φ8Φ8
M8
D
Hind Legs
2PCS
1PC

PRODUCT AS SEMBLY
1
2
Page 2 of 4
80%
4
2
1
3
Align Hind legs in the
seat pad as shown
in the diagram.
Using SHORTER
SCREW (4) with
Washer (#2, 1).
DO NOT FULLY
TIGHTEN.
First HAND tighten
then tightened using
key up-to 60-80%
only at this stage.
Put chair back on a clean
flat surface.
Align seat in the back
pad as shown in the diagram.
Using SHORTER SCREW
(4) with Washer (#2, 1).
DO NOT FULLY TIGHTEN.
First HAND tighten then
tightened using key up-to
60-80% only at this stage.
2
4
1
A
B
80%
4
2
1
3
2
4
1
D
D

PRODUCT ASSEMBLY
4
Page 3 of 4
Put chair in the upright position and
SIT ON THE CHAIR to press downwards on
the seat pad.
Ensuring that all 4 feet touch the ground
and chair is leveled.
Proceed to tighten all screws making sure
the chair remains level when tightening.
Check that all screws are tight on a
regular basis to ensure chair remains level
and secure.
Also you can using adjustable feet to keep
four legs level .
100%
3
80%
5
2
1
3
5
2
Align front legs in the seat pad as
shown in the diagram.
Using LONGER SCREW (5) with
Washer (#2, 1 ).
DO NOT FULLY TIGHTEN.
First HAND tighten then tightened
using key up-to 60-80% only at
this stage.
C
C
1
Adjustable Feet Leveler

PRODUCT ASSEMBLY
5
6
Close the black fabric cover
Page 4 of 4