HighLine CCU1 User manual

software version: EViii* enclosure design may vary
hiGhLiNe
WINDOW CONTROLS
INSTALLATION & USER MANUAL
CCU1
CLIMATE
CONTROL UNIT

NEUT
CLOSE
OPEN
NEUT
EARTH
LIVE
ACTUATOR
MAINS }
}
RAIN
SENSOR
}
CONNECTIONS
CCU1 - USER MANUAL (version 2014) 2
PLEASE NOTE
The installation of all electrical items must be undertaken by a qualified professional.
Mains power must be supplied via a 5-Amp fused spur.
Do not use cable thicker than 1.5mm and multi-strand if possible for flexibility.
This controller will fit into any standard one-gang surface or flush 35mm back box.


OPERATION
CCU1 - USER MANUAL (version 2014) 3
1If you turn the control knob completely to the left the windows will close
and remain closed, alternatively if you rotate the knob completely to the
right the windows will open and stay open irrespective of the weather
conditions.
2Turn the knob to any position between the extremes and you engage the
auto mode which will open or close the windows based upon the
temperature selected on the dial. Should it rain whilst in auto mode the
controller will close the windows resuming auto opening when the sensor
has dried.
3For the rain sensor to operate and the window/s to close automatically
the dial must be set on a temperature and not at either extreme of its
travel.
4This is not a scientific instrument and therefore its temperature settings
are only to be used as a guide as there may be inaccuracies between
the controller and other devices.