Hilti WSC 85 User manual

WSC 85
Circular saw
This document is a summary of the original manual. You must read the detailed operating
instructions in full before operating the product.
Ignoring the warnings and instructions may lead to potentially fatal injury. The product has been
designed for professional use and may be operated, maintained and repaired only by suitably
trained or qualified personnel.
Overview of the product
@Sawdust ejection
;On/off switch
=Cutting angle scale
%Clamping screw for blade-angle adjustment
&Clamping screw for rip fence
(Cutting line indicator
)Cutting depth scale
+Pivoting guard
§Rip fence (parallel guide)
/Riving knife
:Securing screws for riving knife
Before operation, observe the instructions regarding protective equipment.
Printed: 19.09.2017 | Doc-Nr: PUB / 5374970 / 000 / 00

WSC 85
Circular saw
Intended use
The product described is a circular saw. It is designed for cutting wood or wood-like materials, plastics,
gypsum plasterboard, gypsum fiberboard and composite materials, up to a cutting depth of 85 mm (3.35
in).
Data
Technical data
Weight in accordance with EPTA procedure 01 7.8 kg
Rated voltage 230 V
Typical A-weighted sound power level 111 dB(A)
Triaxial vibration value when cutting wood (ah) ≈ 2.5 m/s²
Fitting the saw blade
CAUTION
Risk of damage Unsuitable or incorrectly fitted saw blades may damage the saw.
▶Only use blades which are suitable for this saw. Observe the direction-of-rotation arrow on the
saw blade.
1. Rest the power tool on the ribs provided.
2. Lock the arbor by holding the arbor lockbutton down with one hand.
3. Fit the clamping flange to the arbor.
4. Securely tighten the screw.
5. Make sure that the clamping flange is seated correctly.
Note
The riving knife thickness must be less than the kerf width of the saw blade and at least equal
to the saw blade disc thickness.
Gap A must be less than 5 mm (0.2 in).
Printed: 19.09.2017 | Doc-Nr: PUB / 5374970 / 000 / 00