Hisense HS201C1 User manual

USER MANUAL
Model: HS201C1
Hisense 2.0 Channel Sound Bar Home Theater System
Before using the sound bar, please read this manual
thoroughly and retain it for future reference.

1
EN
Contents
Important Safety Instructions 2
Package Contents 4
Product Diagram 5
Main Unit ...................................................................................................................................................................................5
Remote Control........................................................................................................................................................................6
Instructions 6
Prepare the Remote Control................................................................................................................................................6
Replace the Remote Control Battery................................................................................................................................6
Placement and Mounting.....................................................................................................................................................7
Wall Mounting .........................................................................................................................................................................7
Connections 8
HDMI socket ..............................................................................................................................................................................8
Use the OPTICAL Socket .......................................................................................................................................................8
COAXIAL Socket .......................................................................................................................................................................9
Use the AUX Socket ................................................................................................................................................................9
Connect Power.........................................................................................................................................................................9
Basic Operation 10
Standby/ON............................................................................................................................................................................ 10
Select Modes.......................................................................................................................................................................... 10
Adjust the Volume................................................................................................................................................................ 10
Select a Preset Sound Eect ............................................................................................................................................. 10
AUX / OPTICAL /COAXIAL / HDMI ARC Operation 10
Bluetooth Operation 11
Pair Bluetooth-enabled Devices...................................................................................................................................... 11
Listen to Music from Bluetooth Device ........................................................................................................................ 11
USB Operation 12
Troubleshooting 12
Specications 13

2
EN
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Safety
1 Read these instructions – All the safety and
operating instructions should be read before
this product is operated.
2 Keep these instructions – The safety and
operating instructions should be retained for
future reference.
3 Heed all warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
4 Follow all instructions – All operating and use
instructions should be followed.
5 Do not use this apparatus near water – The
appliance should not be used near water or
moisture – for example, in a wet basement or
near a swimming pool, and the like.
6 Clean only with dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the manufacture’s
instructions.
8 Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce
heat.
9 Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
10 Do not defeat the safety purpose of the
polarized or grounding plug. A polarized
plug has two blades with one wider than the
other. A grounding plug has two blades and a
third grounding prong. The wide blade or the
third prong is provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
11 Protect the power cord from being walked
on or pinched particularly at the plugs,
convenience receptacles, and at the point
where they exit from the apparatus.
12 Only use attachments/accessories specified
by the manufacturer.
13 Use only with the cart, stand, tripod, bracket,
or table specied by the manufacturer,
or sold with the apparatus. When
a cart or rack is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-over.
14 Unplug the apparatus during lightning
storms or when unused for long periods of
time.
15 Refer all servicing to qualified personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
16 This equipment is a Class II or double
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.
17 To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
The apparatus must not be exposed to
dripping or splashing and objects lled with
liquids, such as vases, must not be placed on
apparatus.
18 The mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.
Warning
- The battery (batteries or battery pack) shall
not be exposed to excessive heat such as
sunshine, re or the like.
- These servicing instructions are for use by
qualified service personnel only. To reduce
the risk of electric shock, do not perform
Important Safety Instructions
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN

3
EN
Important Safety Instructions
any servicing other than that contained in
the operating instructions unless you are
qualied to do so.
- Avoid foreign bodies and liquids entering the
device.
- Do not place open e.g. lit candles, on or
directly adjacent to the device.
- Do not use any corrosive or abrasive cleaning
agents. These could damage the surface of
the device.
- Please refer the information on exterior
bottom or rear enclosure for electrical
and safety information before installing or
operating the apparatus.
- Minimum distance around the apparatus for
sucient ventilation is 5cm;
- The ventilation should not be impeded by
covering the ventilation openings with items
such as newspaper, table-cloths, curtains etc.
- No naked flame sources such as lighted
candles should be placed on the apparatus;
- Batteries should be recycled or disposed of as
per state and local guidelines;
- The use of apparatus in moderate or tropical climates.
• The marking label is pasted on the bottom or
back of the equipment.
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
If you think batteries might have been
swallowed or placed inside any part of the body,
seek immediate medical attention. Keep new
and used batteries away from children. If the
battery compartment does not close securely,
stop using the product and keep it away from
children. The remote control supplied with this
product contains a coin/button cell battery. If
the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and
lead to death.
Correct Disposal of this product. This
marking indicates that this product
should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the environment
or human health from uncontrolled waste
disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
To return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
They can take this product for environmental
safe recycling.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. We are the licensee to use such marks. Other
trademarks and trade names are those of their
respective owners.
FCC INFORMATION (for US customers)
Warning:
Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.”
NOTE:
• This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications.
• However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment o and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio /
TV technician for help.
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
• Shielded cables must be used with this unit to
ensure compliance with the Class B FCC limits.

4
EN
3.5mm to 3.5mm audio CableRCA to 3.5mm audio CableCoaxial Cable
Package Contents
Main Unit Remote Control
User Manual
Quick Start Guide
Pattern Paper
AC Power Cord
Wall Bracket
EVA Sponge
Optical Cable
IC Notice:
This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference. and (2) this device must accept any
interference. Including interference that may cause undesired operation of the device.
IC ：11096A-TB341C
CAN ICES-3 (B) / NMB-3 (B)
Avis d’Industrie Canada
Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de
licence L'exploitation est autorisée aux deux conditions suivantes:
(1) I'appareil ne doit pas produire de brouillage, et (2) I'utillsateur de I'appareil doit accepterbrouillage
radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais
fonctionnement de I'appareil.

5
EN
Product Diagram
Main Unit
1(ON/OFF)
Switch the unit between ON and STANDBY
mode.
2(SOURCE)
Select the play mode.
3(Bluetooth)
Select the Bluetooth mode.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect
the existing paired Bluetooth device.
4- (volume)
Decrease the volume level.
5+ (volume)
Increase the volume level.
6Remote Control Sensor
7LED Indicators
• Red/Green: In STANDBY/AUX mode.
• Orange/ash: In Optical/Coaxial mode.
• Blue: In Bluetooth mode.
• White/ash: In HDMI ARC/USB mode.
8Wall bracket screws
9COAXIAL Socket
Digital audio connection.
10 AC~ Socket
Connect power cord.
11 OPTICAL Socket
Digital audio connection.
12 USB Socket
Insert the USB device.
13 AUX Socket
Connect to an external audio device.
14 HMDI ARC Socket
Connect to a TV via HDMI cable.
Rear View
Front View 6
1 2 3
7
4 5
8
910 11 12 13 14

6
EN
Remote Control
1(ON/OFF) Switch the unit between ON and
STANDBY mode.
2SOURCE buttons Select the play mode.
3(MUTE)Mute or resume volume.
4VOL+/VOL- Increase/decrease the volume level.
• BF/PAIR Play/pause/resume playback in
Bluetooth mode.
Press and hold to activate the pairing
function in Bluetooth mode or
disconnect the existing paired
Bluetooth device.
• H,GIn Bluetooth/USB mode:
Skip to previous/next track.
5EQ buttons Select a preset sound eect.
Instructions
Prepare the Remote Control
The Remote Control allows the unit to be operated from a distance.
• Even if the Remote Control is operated within the eective range 19. 7 feet (6m) inch, remote control
operations may be disrupted if there are any obstacles between the unit and the remote control.
• If the Remote Control is operated near other products that generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may operate
incorrectly. Conversely, the other products may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the
protective tab to activate the remote control battery.
Replace the Remote Control Battery
1. Pull out the battery tray and remove the old battery.
2. Place a new CR2025 battery into the battery tray with correct
polarity (+/-) as indicated.
3. Insert the battery tray back into the slot.
Precautions Concerning Batteries
• When the Remote Control is not to be used for a long time (more
than a month), remove the battery from the Remote Control to
prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
• Do not use any batteries other than those specied.
• Do not heat or disassemble batteries.
• Keep away from heat or moisture.
• Do not carry or store batteries with other metallic objects.
Doing so could cause batteries to short circuit, leak or explode.
• Never recharge a battery unless it is conrmed to be a rechargeable
type.
12
4
3
31
2
5
4

7
EN
Placement and Mounting
Normal Placement
(Place Soundbar on leveled
surface in front of TV)
Wall Mounting (if using option-B)
Note:
- Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer’s responsibility to verify that the wall will safely support the total load of the unit and wall
brackets.
- Additional tools (not included) are required for the installation.
- Do not overtighten screws.
- Keep this instruction manual for future reference.
- Use an electronic stud nder to check the wall type before drilling and mounting.
TV




> 1.2 inch
(32mm)
(4mm)
0.2 inch
(5mm)
0.15inch
OTINSS
OTIN
SS
+<'9VUTMK
8KSU\KZNKYIXK]YLXUSZNKSGOT[TOZ
'ZZGINZNK]GRRHXGIQKZYZUZNKSGOT[TOZ]OZN
ZNKYIXK]YXKSU\KJLXUSZNKSGOT[TOZ
/LTKIKYYGX_YZOIQZNK+<'YVUTMKOTZUZNK
HXGIQKZYZUHGRGTIKZNKSGINOTK
,O^Z]UM[SIU\KXGTJYIXK]YTUZOTIR[JKJ
UTZUZNK]GRR:NK_YNU[RJHKVGXGRRKRZUKGIN
UZNKX:NKJOYZGTIKHKZ]KKTZNKZ]UYIXK]Y
YNU[RJHKOTINSS2KG\KGOTIN
SSMGVHKZ]KKTZNK]GRRGTJZNKYIXK]’Y
NKGJ2OLZZNK[TOZ]OZNZNKGZZGINKJ]GRR
HXGIQKZYU\KXZNKNKGJYULZNKYIXK]Y
GTJYRUZOTZUVRGIK
Option - A Option - B

8
EN
Connections
HDMI socket
Use HDMI to connect the Soundbar, AV equipment and TV:
:<


.*3/'8)
ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant
TV to your sound bar through a single HDMI
connection. To enjoy the ARC function, please
ensure your TV is both HDMI-CEC and ARC
compliant and set up accordingly. When
correctly set up, you can use your TV remote
control to adjust the volume output (VOL +/-
and MUTE) of the sound bar.
- Connect the HDMI cable (not included) from
unit's HDMI (ARC) socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press the
remote control to select HDMI ARC.
Tips:
• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may dier depending on the TV. For details about ARC
function, please refer to your TV owner’s manual.
• Only HDMI 1.4 cables can support the ARC function.
:<

56:/)'2
Use the OPTICAL Socket
Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable (included)
to the TV’s OPTICAL OUT socket and the OPTICAL
socket on the unit.
Tip: While in OPTICAL or HDMI ARC or
COAXIAL mode, if there’s no sound output from
the unit, you may need to activate PCM Signal
output on your source device (eg. TV, DVD or
Blu-ray player).

9
EN
:<


)5'>/'2
:<


.KGJVNUTK


COAXIAL Socket
You also can use the COAXIAL (included)
cable to connect the TV's COAXIAL OUT
socket and COAXIAL socket on the unit.
Use the AUX Socket
A. Use a RCA to 3.5mm audio cable (included) to
connect the TV’s audio output sockets to the
AUX socket on the unit.
B. Use a 3.5mm to 3.5mm audio cable (included)
to connect the TV’s or external audio device
headphone socket to the AUX socket on the
unit.
Connect Power
Risk of product damage!
Ensure that the power supply voltage
corresponds to the voltage printed on the back
or the underside of the unit.
- Before connecting the AC power cord, ensure
you have completed all other connections.
• Connect the mains cable to the AC~ Socket
of main unit and then into a mains socket.
Connections

10
EN
Basic Operation
Standby/ON
• When you rst connect the unit to the main socket, the unit will be in STANDBY mode. The POWER
indicator will light up red.
• Press the button on the remote control to switch the main unit ON or OFF.
• Disconnect the main plug from the main socket if you want to switch the unit o completely.
- If a TV or an external device is connected, the unit will switch on automatically when the TV or the
external device is switched on.
- When there is no input signal from the unit in over 15 minutes, then it will automatically switch to
Standby mode.
Select Modes
Press the button on the unit or the HDMI ARC, (Bluetooth), OPTICAL, COAXILA, USB and AUX
buttons on the remote control to select the desired mode.
• Green: In AUX mode.
• Orange/Orange ash: In Optical/Coaxial mode.
• Blue: In Bluetooth mode.
• White/White ash: In HDMI ARC/USB mode.
Adjust the Volume
- Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
- If you wish to turn the sound o, press the button on the remote control. Press the button again
or press the VOL+ / VOL- buttons on the unit or on the remote control to resume normal listening.
- While adjusting the volume, the status indicator ashes quickly.
- While the volume level reaches its maximum level, if you press the VOL+ button again, the status
indicator ashes once. While the volume level reaches its minimum level, if you press the VOL- button
again, the status indicator ashes once.
Select a Preset Sound Eect
While playing, press the NEWS or MOVIE or MUSIC buttons on the remote control to select between
preset equalizers: Movie (recommended for viewing movies), Music (recommended for listening to
music), NEWS (recommended for listening to NEWS).
AUX / OPTICAL /COAXIAL / HDMI ARC Operation
1 Ensure that the unit is connected to the TV or audio device.
2 Press the button on the unit or the AUX / OPTICAL / COAXIAL / HDMI ARC button on the remote
control to select the desired mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.
Tip: While in OPTICAL or HDMI ARC or COAXIAL mode, if there’s no sound output from the unit, you
may need to activate PCM Signal output on your source device (eg. TV, DVD or Blu-ray player).

11
EN
Bluetooth Operation
Pair Bluetooth-enabled Devices
The rst time you connect your Bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters (without
any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 Press the button on the remote control or on the unit to select Bluetooth mode. The Blue indicator
will light ash.
2 The system has entered pairing mode.
- Or press and hold the "BF/PAIR" button on the remote control or the button on the unit to be
searchable. After the“Pairing”voice prompt and the Blue indicator will ash rapidly.
3 Activate your Bluetooth device and select the search mode. “HS201C1”will appear on your Bluetooth
device list.
4 Select “HS201C1” in the pairing list. After the “Paired” voice prompt, the system is successfully
connected and the Blue indicator will light up solidly.
5 Begin playing music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the Bluetooth function on your device.The device is successfully disconnected from the unit
after the “Disconnected” voice prompt.
- Press and hold the “BF/PAIR” button on the remote control.
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this player in 2 minutes, the player will reconnect to the
previous connection.
• The player will also be disconnected when your device is moved beyond the operational range.
• If you want to reconnect your device to this player, place it within the operational range.
• If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
• If the connection is lost, follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution Prole (A2DP), you can
listen to the music stored on the device through the soundbar'.
- If the device also supports Audio Video Remote Control Prole (AVRCP), you can use the soundbar's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the BF/PAIR button on the remote control.
- To skip to a track, press the H,Gbuttons on the remote control.

12
EN
USB Operation
1 Insert the USB device.
2 Press the button on the unit or the USB button on the
remote control to select USB mode.
3 Play starts automatically. If play does not start automatically,
press BF/PAIR button.
- To skip to the previous/next track, press the H/Gbuttons
on the remote control.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using
this unit, review the following before requesting service.
No power
• Ensure that the AC cord is properly connected.
• Ensure that there is power at the AC outlet.
• Press standby button on the remote control or soundbar to turn the soundbar on.
No sound
• Increase the volume. Press Volume Up on the remote control or on the right side of the soundbar.
• Press MUTE on the remote control to ensure the soundbar is not muted.
• Press source buttons to select a dierent input source.
• When using either of the Digital input, if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
• Your TV may be set to variable audio output. Conrm that the audio output setting is set to FIXED or
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is
not muted.
Remote control does not work
• Before you press any playback control button, rst select the correct source.
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.
I hear buzzing or humming
• Ensure all cables and wires are securely connected.
• Connect a dierent source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not,
the problem may be with the original device.
• Connect your device to a dierent input on the soundbar.
I can’t nd the Bluetooth name of this unit on my Bluetooth device
• Ensure the Bluetooth function is activated on your Bluetooth device.
• Re-pair the unit with your Bluetooth device.

13
EN
Specications
Sound Bar
Power Supply .....................................................................................................................................AC100-240V~ 50/60Hz
Power Consumption ............................................................................................................................................................30 W
Output Power ..................................................................................................................................................................15 W x 2
Audio input sensitivity .................................................................................................................................................... 500mV
Frequency Response ...........................................................................................................................................40Hz - 20KHz
Speaker Impedance ..........................................................................................................................................................8 Ω x 2
Unit Dimension (W x H x D): ..........................................................................37.4 x 2.5 x 2.5 inch (950 x 63 x 63 mm)
Net weight ..............................................................................................................................................................3.3 lbs (1.5kg)
Remote Control
Distance/Angle............................................................................................................................................19.7 feet (6m) / 30°
Battery Type........................................................................................................................................................................CR2025
• Design and specications are subject to change without notice.

Model: Hisense 2.0 Channel Sound Bar Home Theater System
HS201C1

Model: Hisense 2.0 Channel Sound Bar Home Theater System
HS201C1
USER MANUAL
Model: HS201C1
Hisense 2.0 Channal Sound Bar Home Theater System
Système Home Cinéma - Barre de son 2.0 Hisense
MANUEL DE L’UTILISATEUR
Veuillez lire le manuel enentier avant d’utiliser le barre
de son. Conservez le manuel pour référence ultérieure.

FR
1
Table des matières
Consignes de sécurité 2
Connexions 8
Support mural ............................................................................................................................................................................7
Placement et montage............................................................................................................................................................7
Remplacer la pile de la télécommande.............................................................................................................................6
Préparer la télécommande ....................................................................................................................................................6
Instructions 6
Prise COAXIAL.............................................................................................................................................................................9
Prise AUX......................................................................................................................................................................................9
Veille / ALLUMéVeille / ALLUMé........................................................................................................................................ 10
Sélection des modes............................................................................................................................................................. 10
Régler le volume..................................................................................................................................................................... 10
Sélectionner un eet sonore prédéni .......................................................................................................................... 10
Écouter de la musique à partir d’un périphérique Bluetooth................................................................................ 11
Fonctionnement USB 12
Caractéristiques 13
Dépannage 12
Associer des appareils compatibles Bluetooth ........................................................................................................... 11
Fonctionnement avec source Bluetooth 11
Fonctionnement AUX / OPTICAL /COAXIAL / HDMI ARC 10
Réglages de base 10
Branchement électrique.........................................................................................................................................................9
Prise Optique ..............................................................................................................................................................................8
Prise HDMI ...................................................................................................................................................................................8
Télécommande ..........................................................................................................................................................................6
Unité principale .........................................................................................................................................................................5
Diagramme du produit 5
Contenu de l'emballage 4

FR
2
Le symbole éclair avec une flèche dans
un triangle équilatéral est destiné à
alerter l'utilisateur de la présence d'une
tension dangereuse non isolée dans le
capot du produit qui peut être d'une
ampleur suffisante pour constituer un
risque de décharge électrique pour les
personnes.
Le point d'exclamation dans un
triangle équilatéral est destiné à alerter
l'utilisateur de la présence d'instructions
importantes d'utilisation et de
maintenance dans la documentation
accompagnant l'appareil.
Sécurité
1 Lisez ces instructions – toutes les consignes
de sécurité et de fonctionnement doivent
être lues avant d’utiliser ce produit.
2 Conservez ces instructions – les instructions
de sécurité et de fonctionnement doivent
être conservées pour référence ultérieure.
3 Respectez tous les avertissements - Tous
les avertissements sur cet appareil et dans
les instructions d'utilisation doivent être
respectées.
4 Suivez toutes les instructions – Toutes les
instructions et consignes d’utilisation doivent
être suivies.
5 N’utilisez pas cet appareil près de l'eau.
L'appareil ne doit jamais être utilisé près
de l'eau ou de l'humidité, tel que dans un
sous-sol humide ou près d'une piscine ou
similaires.
6 Nettoyez l’appareil uniquement à l’aide d’un
chion sec.
7 Ne bloquez pas les ouvertures de ventilation.
Installez l’appareil en suivant les instructions
du fabricant.
8 Ne placez pas l’appareil près d’une source de
chaleur, tels que des radiateurs, des bouches
d’air chaud, des gazinières ou tout autre
appareil (y compris des amplificateurs) qui
produisent de la chaleur.
9 Il existe un danger d’explosion en cas de
remplacement incorrect de la pile. Remplacez
la pile uniquement avec des modèles
identiques ou équivalents.
10 N'éliminez pas la fonction de sécurité de la
fiche polarisée ni de la prise de terre. Une
prise polarisée possède deux lames avec
une plus large que l’autre. Une prise avec
terre possède deux lames et une troisième
broche pour la masse. La lame plus large
et la troisième broche sont là pour votre
sécurité. Si la prise fournie ne rentre pas dans
votre prise murale, prenez contact avec un
électricien pour le remplacement de la prise.
11 Protégez le cordon d’alimentation de tout
piétinement et empêchez qu’il soit pincé, et
plus particulièrement au niveau des prises
de courant et de l’endroit où il est branché à
l’appareil.
12 Utilisez uniquement des xations/accessoires
recommandées par le fabricant.
13 Utilisez uniquement un chariot, socle, trépied,
support ou table spéciés par le fabricant ou
vendu avec l’appareil. Lorsqu’un chariot ou
rack est utilisé, soyez prudent quand
vous déplacez l’ensemble chariot/
appareil de manière à éviter les
blessures en cas de chute.
14 Débranchez l'appareil en cas d'orage ou
lorsqu'il est inutilisé pendant de longues
périodes.
15 Confiez toute réparation à un personnel
qualié. Une réparation est nécessaire lorsque
l'appareil a été endommagé d’une manière
ou d'une autre, tels que lorsque le cordon
d’alimentation ou la che sont endommagés,
du liquide a été renversé, des objets sont
tombés à l’intérieur, l’appareil a été exposé à
la pluie ou à l’humidité, qu’il ne fonctionne
pas correctement ou qu'il est tombé.
16 Cette unité est un appareil électrique
à double isolation de Classe II. Il a été
conçu de telle sorte qu'il ne nécessite pas
une connexion à la terre pour la sécurité
électrique.
17 Pour réduire le risque d’incendie ou
d’électrocution, n’exposez pas cet appareil à
la pluie ou à l’humidité. L'appareil ne doit pas
être exposé aux éclaboussures et aucun objet
rempli de liquides, comme des vases, ne doit
être posé sur celui-ci.
18 La prise principale est utilisée comme
dispositif de déconnexion et il doit toujours
être possible de l'atteindre.
Avertissement
- La pile (piles ou un ensemble de piles) ne doit
pas être exposée à une chaleur excessive, tel
que le soleil, le feu ou similaire.
- Ces instructions de service sont uniquement
à l’attention d’un technicien qualifié. Pour
réduire le risque d’électrocution, n’effectuez
aucune opération d’entretien autre que
celles contenues dans les instructions de
fonctionnement, à moins que vous soyez un
technicien qualié.
-Évitez les corps étrangers et les liquides à
l’intérieur de l’appareil.
Consignes de sécurité
ATTENTION
RISQUE D’ELECTROCUTION
NE PAS OUVRIR
ATTENTION: POUR RÉDUIRE LE RISQUE D’ÉLECTROCUTION,
NE PAS ENLEVER LE COUVERCLE (OU FACE ARRIÈRE) IL N’Y A
AUCUNE PIÈCE RÉPARABLE PAR L’UTILISATEUR À L’INTÉRIEUR.
CONFIEZ LA RÉPARATION À UN TECHNICIEN QUALIFIÉ.