Hisense HS214 User manual

Quick Start Guide
2.1 Channel Sound Bar Home Theater System
Model: HS214
1
2
Remote Control
What’s in the Box
Main Unit Remote Control
R03(Size AAA)Battery x2
AC Power Cord
User Manual/
Quick Start Guide
Optical Cable
Identifying the Parts
Replace the Remote Control Battery:
First-time use：
Put the 2 x AAA batteries (included)
into the remote control before use.
Do not expose the battery or
other direct heat sources.
EN
2.1 Channel Sound Bar Home Theater System
Wall Mounting Kit
1
3
5
7
10
11
4
2
6
8
9
12
3
Main Unit
1Remote Control Sensor
Receive signal from the remote control.
2 LED Indicators
• Red : In STANDBY mode.
• Optical mode.
• Blue : In Bluetooth mode.
• White : In HDMI ARC mode.
•
•
•
Coaxial mode.
6Wall Mount
Install the wall mounting screws into
the wall mount of the unit.
3(ON/OFF) Button
Switch the unit between ON and Standby mode.
5 +/- (Vol+/Vol-) Buttons
Increase/decrease the volume level.
4 (SOURCE) Button
Select the play mode.
7AC~ Socket
Connect to the power supply.
8IR Repeater
Transfer the signal received from
remote control to the TV
10 HDMI ARC Socket
Connect to a TV via HDMI cable.
11 Aux Socket
Connect to an external audio device.
13 USB Socket
Insert the USB device to play music.
9 COAXIAL Socket
Connect to a coaxial audio output on the TV.
12 OPTICAL Socket
Connect to an optical audio output on the TV.
3
9
4
12
5
10 11 12 13
87
6 6
Light green
Green : In AUX mode.
Yellow : In USB mode.
HDMI Cable
1 (ON/OFF) Switch the unit between ON and
STANDBY mode.
2 (MUTE)Mute or resume volume.
3
SURR
DIM -
DIM +
buttons Select MOVIE/MUSIC/NEWS sound eect.
Adjust the surround ON/OFF.
4
In Bluetooth/USB mode:
Skip to previous/next track.
5
Play/pause/resume playback in Bluetooth/
USB mode. Press and hold to activate the
pairing function in Bluetooth mode or
disconnect the existing paired
Bluetooth device.
6
VOL+/VOL- Increase/decrease the volume level.
Increase/decrease the bass level.
7
SOURCE Select the play mode.
11
EQ
Decrease the display brightness.
8
,
Increase the display brightness.
9
BASS + , BASS -10
Manufactured under license
from Dolby Laboratories. Dolby,
Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.

Connections
3
6Wall Mounting
5
HDMI ARC OPTICALCOAXIAL AUDIO OUT AUX
A
B
●Before connecting the AC power cord, ensure
you have completed all other connections. Bluetooth( ) Operation
4Basic Operation
Settings Bluetooth
Bluetooth
DEVICES
Hisense HS214
Now Discoverable
Connected
2
< 8 m / 27 ft
13
540MM
Adjust the Volume
Press the VOL+ / VOL- buttons on the unit or on
the remote control to adjust the volume.
If you wish to turn the sound o, press the
button on the remote control. Press the button
again or press the VOL+ / VOL- buttons on the
unit or on the remote control to unmute.
While playing, press the NEWS / MOVIE/ MUSIC
buttons on the remote control to select the preset
equalizers:
MOVIE(recommended for watching movie)
MUSIC (recommended for listening to music)
NEWS (recommended for listening to news)
Note: While adjusting the volume, the status LED
indicator will ash once. When the volume has
hit maximum/minimum value level, the status LED
indicator will ash quickly.
The unit automatically turns to Standby mode
after about15 minutes if the TV or the external
unit is disconnected or switched o.
•
the mains plug from the mains socket.
• Please turn the unit o completely to save
energy when not in use.
Select Modes
Press the (SOURCE)button repeatedly on the
unit or the OPTICAL,COAXIAL, HDMI ARC,
(Bluetooth),USB and AUX
buttons on the
remote control to select the desired mode.
The LED indicator on the front of the main unit
will show which mode is currently in use.
Standby/On
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
Auto Wake
• If a TV or an external device is connected
AUX/ OPTICAL / COAXIAL / HDMI ARC), the unit
will switch on automatically when the TV or
the external device is switched on.
disconnect