Hisense 98U7HAU User manual

ES-A22260A-1 English
Before using the TV, please read this guide thoroughly and
retain it for future reference.
98U7HAU

Contents
Figures and illustrations in this manual are provided for reference only and may
di󰀨er from actual product appearance.
Parts of the software function changes with the system upgrade.
If you encountered di󰀩culty when setting up your TV, we suggest you refer to the
troubleshooting tips in the User Manual or the E-Manual.
Installing the Stand or Wall Mount Bracket.....................................................................1
TV Front and Rear..........................................................................................................3
Connection .....................................................................................................................4
Remote Control ..............................................................................................................6
Specifications .................................................................................................................8
Other Information............................................................................................................9
Accessories List
The following accessories are included with TV:
The accessories may be di󰀨erent from the list above due to di󰀨erent models, countries/regions,
please refer to the actual accessory bag.
Quick Setup Guide × 1 Remote Control × 1 AA or AAA Battery × 2
Power Cord × 1 Base Stand × 2 Screw × 6
RCA jack to AV Cable × 1
This TV is equipped with this quick setup guide and embedded E-Manual
(Settings > Support > E-Manual).
E-Manual support functions
Search
Try Now
QR Code
Find the help you are looking for.
Go directly to the function page and try it.
Scan to open the E-Manual on your mobile device.
Find what you want

A
Declaration
Any content and service accessed through this device, while only intended for individual non-
commercial use, shall be the property of the applicable third party and subject to protection by
regulations and laws on copyright, patent, trademark and other intellectual property rights. No
part of such content and service may be modified, duplicated, published, uploaded, distributed,
translated, marketed, or used to make and distribute products derived from it without the prior
permission of the content owner or service provider.
You acknowledge and agree explicitly that you will solely bear the risk associated with the use of
this device, and further you will solely bear any risk related to satisfactory quality, performance
and accuracy for any content and service accessed through this device. To the maximum extent
permitted by applicable law, this device and any third party’s content and service is provided as it
is without any guarantee, express or implied.
Manufacturer hereby declare explicitly that Manufacturer shall not be held liable for any guarantee
and conditions, express or implied, related to this device and any content and service, including
but not limited to warranty on marketability, satisfactory quality, fitness for a particular purpose,
accuracy, quiet use and non-violation of any third party’s rights; to the maximum extent permitted
by applicable law, Manufacturer gives no guarantee on the accuracy, validity, timeliness,
legitimacy and completeness of any content or service provided through this device, or the
fitness of such device, content or service for your particular requirement, or the protection from
interruption and error during operation of such device, content or service; to the maximum extent
permitted by applicable law, in any case, including fault or neglect, Manufacturer shall not be
held liable for legal actions or indemnity obligation arising from any consequence as a result of or
related to any information loaded in this device or use of such device, content or service by you or
any third party.
Any content and service provided as it is together with this device shall be the property of the
applicable third party, therefore Manufacturer gives no declaration or warranty on modification,
suspension, cancellation, termination or abortion thereof, and shall not be held liable for legal
actions or indemnity obligation arising thereof.
Manufacturer reserves the rights to restrict the use or access of certain content or service. As
the content and service are transmitted through third party’s network and transmission facilities,
Manufacturer undertakes no customer service thereof or the obligation for such customer service.
This symbol alerts user about the
presence of a dangerous voltage not
isolated inside the product which can
be sufficiently powerful to constitute a
risk of electrocution.
This symbol alerts user about the
presence of important operating
instructions and maintenance in the
document enclosed in the package.
ATTENTION
RISK OF SHOCK
ELECTRIC
Do not open the back cover.
In no case the user is allowed to operate
inside the TV set. Only a qualified
technician is entitled to operate.

B
Warning Safeguards
Please read the following safeguards for
your TV and retain for future reference.
Always follow all warnings and
instructions marked on the television.
1. A note about safety and operating
instructions
Read and follow all safety and operating
instructions, and retain them safely for
future reference.
2. Heed Warnings
Adhere to all warnings on the appliance
and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before
cleaning. Do not use liquid, abrasive,
or aerosol cleaners. Cleaners can
permanently damage the cabinet and
screen. Use a lightly dampened cloth for
cleaning.
4. Wall Mount Bracket
Wall mount bracket is only available for
some models. If wall mount bracket is not
supplied with this product, you can buy it
at the local market.
Please refer to the Installing the Wall
Mount Bracket page for dimensions.
5. Water and Moisture
Avoid dripping or splashing of liquids onto
the product. Objects filled with liquids,
such as vases, should not be placed
above the product.
6. Setting
Do not place this TV on an unstable cart,
stand or table. Placing the TV on an
unstable base can cause the TV to fall,
resulting in serious personal injuries as
well as damage to the TV. Use only a cart,
stand, bracket or table recommended by
Stability Hazard
A television set may fall, causing serious
personal injury or death. Many injuries,
particularly to children, can be avoided
by taking simple precautions such as:
ALWAYS use cabinets or stands or
mounting methods recommended by
the manufacturer of the television set.
ALWAYS use furniture that can safely
support the television set.
ALWAYS ensure the television set
is not overhanging the edge of the
supporting furniture.
ALWAYS educate children about the
dangers of climbing on furniture to
reach the television set or its controls.
ALWAYS route cords and cables
connected to your television so they
cannot be tripped over, pulled or
grabbed.
NEVER place a television set in an
unstable location.
NEVER place the television set on
tall furniture (for example, cupboards
or bookcases) without anchoring both
the furniture and television set to a
suitable support.
NEVER place the television set on
cloth or other materials that may be
located between the television set
and supporting furniture.
NEVER place items that might tempt
children to climb, such as toys and
remote controls, on the top of the
television or furniture on which the
television is placed.
If your existing television set is being
retained or relocated, the same
considerations as above should be
applied.

C
the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are
provided for ventilation, to ensure reliable
operation of the TV and to protect it from
overheating. Do not cover the ventilation
openings in the cabinet and never place
the set in a confined space such as built-
in cabinet unless proper ventilation is
provided. Leave a minimum 10cm gap all
around the unit, the rear of the TV should
be 6cm away from the wall.
8. Power Source
This TV should be operated only from
the type of power source indicated on
the marking label. If you are not sure of
the type of power supplied to your home,
consult your appliance dealer or local
power company.
9. Power-Cord Protection
Power- supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords
at plug, wall outlets, and the point where
they exit from the TV. MAIN plug on the
power cord is used as the disconnect
device, the disconnect device and socket-
outlet shall be easily accessible.
10. Lightning
For added protection for this TV during
a lightning storm, or when it is left
unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system.
This will prevent damage to the TV due to
lightning or power-line surge.
11. Power Lines
An outside antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power
circuits, or where it can fall into such
power lines or circuits. Where installing
an outside antenna system, extreme care
should be taken to keep from touching
such power lines or circuits as contact
with them might be fatal.
12. Overloading
Do not overload wall outlets and
extension cords as this can result in a risk
of fire or electric shock.
13. Object and Liquid Entry
Never push objects of any kind into this
TV through openings as they may touch
dangerous voltage points or short-out
parts that could result in fire or electric
shock. Never spill liquid of any kind on or
into the TV.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is
connected to the TV, be sure the antenna
or cable system is grounded so as to
provide some protection against voltage
surges and built-up static charges.
15. Servicing
Do not attempt to service this TV yourself
as opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.
16. Damage Requiring Service
Unplug the TV from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
(a) When the power - supply cord or plug
is damaged.
(b) If liquid has been spilled, or objects
have fallen into the TV.
(c) If the TV has been exposed to rain or
water.
(d) If the TV does not operate normally by
following the operating instructions.

D
Adjust only those controls that are
covered by the operating instructions
as an improper adjustment of other
controls may result in damage and
will often require extensive work by a
qualified technician to restore the TV
to its normal operation.
(e) If the TV has been dropped or the
cabinet has been damaged.
(f) When the TV exhibits a distinct
change in performance - this indicates
a need for service.
17. Replacement Parts
When replacement parts are required,
be sure the service technician has
used replacement parts specified by
the manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repair
to the TV, ask the service technician to
perform safety checks to determine that
the TV is in safe operating condition.
19. Heat
The product should be situated away
from heat sources such as radiators,
heat registers, stoves, or other products
(including amplifiers) that produce heat.
20. Fire
The product should be situated away
from naked flame sources such as lighted
candle.
21. Off-gassing
The TV smells of plastic is normal and
will dissipate over time.
To fully disconnect the TV, remove
power plug from wall socket. Be
sure to have the wall socket and
power plug readily accessible.
Do not mix and use new batteries
with old batteries, or batteries with
different types. Do not expose
batteries to heat such as direct
sunlight or fire. Make sure the
batteries' positive and negative
ends are facing the correct
direction.
The device should not be exposed
to dripping and spraying and it
cannot be placed under objects
filled with liquids.
AC voltage: This symbol indicates
that the rated voltage marked
with the symbol is AC voltage.
Class I product: This symbol
indicates that it requires a safety
connection of protective earthing
(ground).
Apparatus with CLASS I construction
shall be connected to a MAINS
socket outlet with a protective
earthing connection.

1
Follow the illustrations and textual instructions below to complete the installation steps:
Installing the Stand or Wall Mount Bracket
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Installing the stand
2. First, take out the upper cushion
a1, then take out upper cushion
a2. Next, take out the front
cushion and back cushion.
NOTE
3 people or above are required for installing the stand.
upper
cushion a1
upper
cushion a2
front cushion
back cushion
3. Two people stand on each side of the
television, grasp big handles with one
hand and hold its top with another hand.
The other person could give assistance
during the installation. Place the TV on
the upper cushions with the screen face
upward. Make back cover touch the
upper cushions.
Note: Two upper cushions should be at
the middle of the TV.
1. Take out the base stands.
upper
cushions
700mm
upper
cushions

2
Note: If your table is long enough to place the TV on top of, then insert the base
stands into the screw holes ‘A’ that are shown in the illustration. If your table is NOT
long enough, then insert the base stand into the screw holes ‘B’ that are shown in
the illustration. Note that these two installation methods types cannot be mixed.
Base
Stand
Screws:
M5×16 Base Stand
Screws: M5×16
AA
Base Stand Base Stand
B
B
Screws: M5×16
Screws:
M5×16
4. When finished, take off the lower box. Secure the Base Stand to the TV with the 6
screws in the accessory bag tightly.
Before mounting the TV, remove the TV stand if you have already attached it, and make
sure the wall mount bracket supports the weight of your TV.
Installing the Wall Mount Bracket
Wall mount hole
pattern (mm) 600 × 400
Wall mount
screw size M8
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover of
the TV
9.5-11.5 mm
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.
NOTE
The diameter and length of the screws differ depending on the wall mount bracket
model.
Wall mount bracket is optional, your device may not have wall mount bracket, please
refer to the actual accessories.
Place spacers between the TV and bracket.
Standard dimensions are shown below.
We do not recommend hanging the TV on a slanted wall, and
when wall mounting make sure your television remains parallel to
the wall and does not lean forward. TV
screen
Vertical
surface

3
TV Front and Rear
NOTE
Check the jacks for position and type before making any connections.
Loose connections can result in image or colour problems. Make sure
that all connections are tight and secure.
The TV may not be compatible with all external devices. To check
compatibility, please refer to the user manual of external device.
Do not connect external equipment while TV's power cord is plugged
in. It may cause electric shock.
Powering on the TV requires several seconds to load programmes. Do
not rapidly turn the TV off as it may cause the TV work abnormally.
The Picture is Only for Reference.
Item Description
Power indicator The light is white in standby mode.
Standby / Source
Press the button to turn the TV on. Press it again
to bring up the control menu and move the focus
between different inputs. Long press the button to
make a selection.
AC INPUT
Power indicator /
Single button (Standby/Source)

4
Terminals
Connection
NOTE
•The location and names of the terminals on the TV may vary according to TV model,
and not all terminals available on all models.
ANT Connect an outdoor VHF/UHF antenna or cable.
HDMI Connect an HDMI cable from an external equipment.
HDMI (eARC)
Connect an HDMI cable from an external digital audio system.
Please note that it works only when the TV is connected to the
audio receiver that supports the eARC function.
AV IN Connect a composite video cable and left-right audio cables
from an external AV device.
USB
Connect a USB device for browsing photos, listening to music
and watching movies.
DIGITAL
AUDIO OUT Connect an optical cable from an external digital audio system.
LAN Connect an Ethernet cable to access a network or the Internet.
HEADPHONE
Connect headphone for audio out of the TV.
SERVICE Service jack is not available for you to connect an external
device. It can only be used by our factory for testing purposes.
NOTE
When connecting a hard disk or a USB hub, always connect the
mains adapter of the connected device to the power supply. If a
USB 1.1 or USB2.0 device requires more than 500mA or 5V, the
USB device may not be supported. Max supported current for
USB 3.0 device is 1A (only for some models). Exceeding the max
supported current may result in damage or data loss.
Certain digital cameras may not be compatible with the TV.
ATTENTION
Excessive sound pressure from earphones and headphones can
cause hearing loss.

5
Wired setup
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
·We recommend you to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don’t have to enter them manually. Most home networks already have DHCP.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Wireless setup
Connect your TV to your wireless network, you need a wireless router or modem.
See the illustration below.
·The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac/ax
communication protocols.
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
NOTE
You must use the built-in Wireless LAN Adapter to use a wireless network because
the set doesn’t support external USB network adapter.
If the wireless router supports DHCP, your TV can connect more easily to the
wireless network.
If you apply a security system which is not listed below, it will not work with the TV.
Security system : WPA, WEP, WPA2.
In order to guarantee smooth network, the distance between router and TV should be
less than 10 meters.
Network

6
Remote Control
Buttons of remote control
NOTE
The included remote control will vary depending on model, country/region. Check
information according to the actual remote control in the accessory bag.
OK / Display the on-screen
keyboard
Select input sources
Power on/ Standby
Select a channel or input
numbers
Quick access buttons to
apps
Special function buttons
Quick setup Media content control
function buttons
Navigation buttons
(Up/Down/Left/Right)
Under the Menu or App,
return to the previous
place
Exit the menu or exit
the application
Channel (up/down)
Display the Home screen
Volume (up/down)
Activate the microphone
Display subtitles in the
Live TV
Mute and restore sound
Display the current
program information
Display the Electronic
Program Guide (DTV mode) Display the Channel List on
the screen
Physical Switch (Side
view): Turn on to activate
hands-free wake-up
feature*
*When you do not use hands-free wake-up, please turn off the physical switch to lengthen the battery life.

7
Installing Batteries in the Remote Control
1. Slide the back cover to open the battery compartment of the remote
control.
2. Insert two AA or AAA size batteries. Make sure to match the (+)
and ( - ) ends of the batteries with the (+) and ( - ) ends indicated
in the battery compartment.
3. Close the battery compartment with the cover.
NOTE
Product image is only for reference, actual product may vary in appearance.
Dispose of your batteries in a designated disposal area.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into the
battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Leaving a battery in an extremely high temperature surrounding environment that
can result in an explosion or the leakage of flammable liquid or gas.
Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
Risk of fire or explosion if the battery is replaced by an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result in an explosion or
the leakage of flammable liquid or gas.
Remote Control Operation Range
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re-cycler.
1. The remote control can work at a distance of up to 8
meters in front of the TV set.
2. The remote control angle: taking the remote sensor as
an apex, 6 meters away, its controlled horizontal angle is
within ±30°, while the vertical angle is within ±15°.
3. The operating distance may vary depending on the
brightness of the room.
6m 8m 6m
6m 8m 6m
30° 30°
15° 15°
Pairing the Remote Control (only for Bluetooth remote control)
Pair the remote to the TV after you power it on. Keep the remote control within 3
metres from the TV. Press any button (except power and mic button) to pair.
NOTE
In special cases, press and hold [ ] button to pair.
If an unknown error occurred with the remote, then it could have been caused by
interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control while the battery power is
normal, you can take out the batteries, press any key for 1~2 seconds, and insert
them back. Then the remote control will work normally.
The remote cannot be paired to the TV while the TV is in standby mode.

8
Features, appearance and specifications are subject to change without notice.
Specifications
Item 98"
Dimension
(mm)
Without Stand
(W × H × D) 2186×1250×99
With Stand
(W × H × D) 2186×1351×532
Weight
(kg)
Without Stand 65.0
With Stand 67.0
Active Screen Size
(Diagonal)
(cm)
248
Screen resolution 3840 × 2160
Audio power 15W + 15W + 20W
Power consumption Please refer to the rating label.
Power supply Please refer to the rating label.
Standby Power 0.5W
Receiving
systems
Analog PAL-D/K, B/G, I SECAM-D/K, B/G
Digital DVB-T/T2, DVB-C
Environmental conditions
Temperature: 5°C - 45°C
Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa
HDMI Input
60Hz (640×480, 800×600, 1024×768)
60Hz (480i, 480p, 720p, 1080i, 1080p)
50Hz (576i, 576p, 720p, 1080i, 1080p)
24Hz 25Hz 30Hz 50Hz 60Hz (3840×2160)
120Hz(3840×2160 only for HDMI 3,4)
120Hz(2560×1440 only for HDMI 3,4)
120Hz(1920×1080 only for HDMI 3,4)

9
Other Information
Packaging and electrical goods should be recycled appropriately, and not treated
as household waste. Please dispose of this equipment at your applicable collection
point for the recycling of electrical & electronic equipment waste. By ensuring the
correct disposal of this product, you will help prevent potentially hazardous to the
environment and to human health, which could otherwise be caused by unsuitable
waste handling of this product. The recycling of materials will help conserve natural
resources. Please do not therefore dispose of your old electrical and electronic
equipment with your household waste. For more detailed information about
recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Disposal of Used Electrical & Electronic Equipment
License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE
REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,
L.L.C. SEE HTTP://WWW.MPEGLA.COM
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby
Laboratories Licensing Corporation. Dolby Vision IQ is a trademark of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works.
Copyright © 2012-2022 Dolby Laboratories. All rights reserved.
The terms HDMI and HDMI High-Denition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.

10
What is Freeview Plus?
Freeview Plus is a new television service delivered via broadband providing a state of
the art Electronic Program Guide (EPG) and seamless access to catch-up TV across
the free-to-air networks with the simple press of a button.
How does it work?
First ensure the TV is connected to internet and an antenna system. Then when you’re
watching TV, you’ll briey see a prompt at the top left of the screen. Press the ‘Green’
button on your remote to launch Freeview Plus. More information about Freeview Plus
can be found on http://www.freeview.com.au/
NOTE
Freeview Plus service only available in Australia territories.