Hitachi Maxell MP-WU8801W User manual

1QM00483-1
LCD Projector
User's Manual (detailed) Network Guide
Thank you for purchasing this product.
This manual is intended to explain only the network function. For proper use of this
product, please refer to this manual and the other manuals for this product.
Features
This projector has the network function that brings you the following main features.
WARNING
• The information in this manual is subject to change without notice.
7KHLOOXVWUDWLRQVLQWKLVPDQXDODUHIRULOOXVWUDWLYHSXUSRVHV7KH\PD\GLႇHU
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
9 Web Control : allows you to monitor and control the projector through a network from a
computer, smartphone and tablet device. (35)
9 Network Presentation : allows the projector to project computer, images transmitted
through a network. (77)
9 My Image : allows the projector to store up to four still images and project them. (81)
9 Messenger : allows the projector to display text sent from a computer through a network.
(82)
9 Network Bridge : allows you to control an external device through the projector from a
computer. (85)
MP-WU8801W/MP-WU8801B
MP-WU8701W/MP-WU8701B
Ź%HIRUHXVLQJWKLVSURGXFWEHVXUHWRUHDGDOOPDQXDOVIRUWKLV
product. After reading them, store them in a safe place for future reference.

2QM00483-1
Contents
Contents 
Caution .......................................................................................... 5
1. Network Function ..................................................................... 6
1.1 Web Control ................................................................................................ 6
1.2 Network Presentation . ................................................................................ 7
1.3 My Image Function ..................................................................................... 8
1.4 Messenger Function ................................................................................... 9
1HWZRUN%ULGJH)XQFWLRQ ........................................................................... 10
1.6 Other Functions ......................................................................................... 11
1.6.1 E-mail Alerts ................................................................................................................... 11
1.6.2 Projector Management using SNMP .............................................................................. 11
1.6.3 Event Scheduling ........................................................................................................... 11
1.6.4 Command Control via the Network ................................................................................ 11
2. Connection to the network .................................................... 12
2.1 Connection via wireless LAN .................................................................... 13
2.1.1 Connection in Simple Access Point Mode ..................................................................... 15
2.1.2 Connection in Infrastructure Mode ................................................................................. 16
2.2 Connection via wired LAN ......................................................................... 18
2.3 Applications .............................................................................................. 20
2.4 NETWORK Menu . .................................................................................... 21
3. Web Control ............................................................................ 35
3.1 Projector Web Control ............................................................................... 38
3.1.1 Login .............................................................................................................................. 38
3.1.2 Network Information ....................................................................................................... 40
3.1.3 Network Settings ............................................................................................................ 41
3.1.3.1 Common Setup ......................................................................................................... 41
3.1.3.2 Wireless Setup ......................................................................................................... 43
3.1.3.3 Wired Setup .............................................................................................................. 46
3.1.3.4 Other Setup .............................................................................................................. 47
3.1.4 Port Settings .................................................................................................................. 48
3.1.5 Mail Settings .................................................................................................................. 50
3.1.6 Alert Settings .................................................................................................................. 52
3.1.7 Schedule Settings .......................................................................................................... 53
3.1.7.1 Schedule Management ............................................................................................ 53
3.1.7.2 Program List ............................................................................................................. 54
3.1.7.3 Program Edit ............................................................................................................. 55
3.1.7.4 Program Copy .......................................................................................................... 56

3QM00483-1
Contents

3.1.8 Date/Time Settings ......................................................................................................... 57
3.1.9 Security Settings ............................................................................................................ 59
3.1.9.1 User Account ............................................................................................................ 59
3.1.9.2 Network Control ........................................................................................................ 60
3.1.9.3 Network Presentation ............................................................................................... 61
3.1.9.4 SNMP ....................................................................................................................... 62
3.1.10 Projector Control .......................................................................................................... 63
3.1.11 Remote Control ............................................................................................................ 64
3.1.12 Projector Status ........................................................................................................... 65
3.1.13 Connection Test ........................................................................................................... 66
3.1.14 Network Restart ........................................................................................................... 67
3.2 Crestron e-Control® .................................................................................. 68
3.2.1 Main window .................................................................................................................... 70
3.2.2 Tools window ................................................................................................................... 72
3.2.3 Info window ..................................................................................................................... 74
3.2.4 Help Desk window ........................................................................................................... 75
3.2.5 Emergency Alert .............................................................................................................. 76
4. Network Presentation ............................................................. 77
4.1 Outline ...................................................................................................... 77
4.2 Display Mode . ........................................................................................... 78
4.2.1 Single PC mode ............................................................................................................. 78
4.2.2 Multi PC mode ............................................................................................................... 78
4.3 Multi Projector Mode . ............................................................................... 79
4.4 Moderator Control Mode . ......................................................................... 79
4.5 Port Number . ............................................................................................ 80
5. My Image Function ................................................................. 81
6. Messenger Function ............................................................... 82
6.1 Outline ...................................................................................................... 82
6.2 Display Style ............................................................................................. 83
7. Network Bridge Function ....................................................... 85
7.1 Connecting devices .................................................................................. 85
7.2 Communication setup ............................................................................... 86
7.3 Communication port ................................................................................. 86
7.4 Transmission method ............................................................................... 87
7.4.1 HALF-DUPLEX .............................................................................................................. 87
7.4.2 FULL-DUPLEX ............................................................................................................... 88

4QM00483-1
Contents

8. Other Functions ...................................................................... 89
8.1 E-mail Alerts ............................................................................................. 89
8.2 Projector Management using SNMP ........................................................ 92
8.3 Event Scheduling ..................................................................................... 94
8.4 Command Control via the Network .......................................................... 98
8.5 Crestron Connected® .............................................................................. 103
9. Troubleshooting ................................................................... 104
10. Warranty and after-sales service ...................................... 113

5QM00483-1
Caution
Caution
• %HVXUHWRFRQ¿UPWKDWWKHSURMHFWRUKDVEHHQLQVWDOOHGDQGFRQQHFWHGVDIHO\
even if it is turned on automatically.
•  If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
•  Attaching an optional wireless adapter to the projector enables wireless
connection. Follow the cautions below when you use the wireless adapter.
[Restriction on plugging and unplugging the wireless adapter (option)]
%HIRUH\RXLQVHUWRUSXOORXWWKHZLUHOHVVDGDSWHUIURPWKHSURMHFWRUWXUQRႇWKH
power of the projector and pull out the power cord’s plug from the outlet. Do not
touch the wireless adapter that is connected to the projector while the projector is
receiving AC power. Do not use any extension cable or device when connecting
the adapter to the projector.
[Security precautions when using wireless LAN (option)]
It is recommended that security settings, such as SSID and ENCRYPTION, are
VSHFL¿HGZKHQXVLQJZLUHOHVV/$1FRPPXQLFDWLRQ,IWKHVHFXULW\VHWWLQJVDUHQRW
VSHFL¿HGWKHFRQWHQWVPD\EHLQWHUFHSWHGRULWPD\FDXVHXQDXWKRUL]HGDFFHVV
to the system. For details on wireless LAN security settings, refer to 3.1 Projector
Web Control. Although the projector has security functions, they do not always
guarantee prevention of the risks mentioned above.
ŹYou do not need a radio license to use the adapter, but you
should be aware of the following:
• DO NOT USE NEAR THE FOLLOWING!
- Microwave ovens
-,QGXVWULDOVFLHQWL¿FRUPHGLFDOGHYLFHV
- Designated low power radio stations
- Premises radio stations
- Using this projector near the above may cause radio interference, which
would result in a decrease in transmission speed or interruption, and even
lead to malfunctioning of devices such as pacemakers.
•  Depending on the location where this projector is used, radio wave interference
may occur, which may result in a decrease in transmission speed or interruption
in communication. In particular, please be aware that using the wireless adapter
at locations where there is reinforced steel, other types of metals or concrete is
likely to cause radio wave interference.
• Available Channels
7KLVSURMHFWRUXVHVWKH*+]DQG*+]UDGLRIUHTXHQF\EDQGEXW
depending on the country or region you are in, the channels that you can use
might be limited. Please consult your dealer for information on the usable
channels.
%ULQJLQJWKLVSURMHFWRURXWRIWKHFRXQWU\RUUHJLRQ\RXUHVLGHLQDQGXVLQJLW
there could lead to a violation of the radio laws of that country or region.
• The W52 is for indoor use only. Outdoor use is prohibited.
CAUTION

6QM00483-1
1. Network Function
1. Network Function
This chapter describes the outline of network function.
Connecting the projector and the computer via the network, remote control and
status monitoring of the projector can be performed by Web browser.
Two types of interface, “Projector Web Control” and “Crestron e-Control®” are
available for this projector. (35)
1.1 Web Control
Projector Web Control
Crestron e-Control®

7QM00483-1
1.2 Network Presentation
1. Network Function
The projector can display or play back the computer screen images and audio
data that are transmitted through the network.
7RXVH1HWZRUN3UHVHQWDWLRQDQH[FOXVLYHDSSOLFDWLRQ/LYH9LHZHULVUHTXLUHG
7KHIROORZLQJDSSOLFDWLRQLVUHTXLUHGWRXVH1HWZRUN3UHVHQWDWLRQ
OS Application
Windows®LiveViewer
iOS(iPhone/iPad) Projector Quick Connection
AndroidTM Projector Quick Connection

8QM00483-1
1.3 My Image Function
1. Network Function
The projector can display still images transferred via the network.
,WLVSRVVLEOHWRDOORFDWHXSWRLPDJH¿OHV
0<,0$*(WUDQVPLVVLRQUHTXLUHVDQH[FOXVLYHDSSOLFDWLRQIRU\RXUFRPSXWHU
Use the application to transfer the image data.
1
43
2
Transfer image data
Display image data (ex. )

9QM00483-1
1.4 Messenger Function
1. Network Function
The projector can display text data transferred via the network on the screen and
play back audio data inside the projector.
Up to 12 text data can be stored.
Transfer text data
Display text data (ex. )
1
4
3
2
12

10 QM00483-1
1.5 Network Bridge Function
1. Network Function
7KLVSURMHFWRULVHTXLSSHGZLWKWKH1(7:25.%5,'*(IXQFWLRQWRSHUIRUP
mutual conversion of a network protocol and a serial interface.
%\PDNLQJXVHRIWKH1(7:25.%5,'*(IXQFWLRQDFRPSXWHUFRQQHFWHGWRWKH
projector via wireless or wired LAN is able to control an external device via
RS-232C communication using the projector as a network device.
RS-232C
RS-232C cable
CONTROL port
LAN port or HDBaseT port
External device
Wired LAN
LAN cable
Computer
Protocol change
TCP/IP data Serial data
WIRELESS port
(Wireless adapter)
Wireless
LAN

11 QM00483-1
1.6 Other Functions
1. Network Function
7KHSURMHFWRUFDQDXWRPDWLFDOO\VHQGDQDOHUWPHVVDJHWRWKHVSHFL¿HGHPDLO
DGGUHVVHVZKHQWKHSURMHFWRUGHWHFWVDFHUWDLQFRQGLWLRQUHTXLULQJPDLQWHQDQFH
or detected an error. (89)
1.6.1 E-mail Alerts
The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
WKHQHWZRUN7KH6103PDQDJHPHQWVRIWZDUHZLOOEHUHTXLUHGRQWKHFRPSXWHU
to use this function. (92)
1.6.2 Projector Management using SNMP
The scheduling function enables to setup scheduled events including
SRZHURQSRZHURႇ,WHQDEOHVWREH³VHOIPDQDJHPHQW´SURMHFWRU
The schedule can be set in Projector Web Control or OPTION-SCHEDULE menu
in the projector. (94)
1.6.3 Event Scheduling
<RXFDQFRQ¿JXUHDQGFRQWUROWKHSURMHFWRUYLDWKHQHWZRUNXVLQJ56&
commands. (98)
1.6.4 Command Control via the Network

12 QM00483-1
2. Connection to the network
2. Connection to the network
The connection method of wireless LAN and wired LAN is as follows.
:LUHOHVV/$186%:/*
Item Description
Standard IEEE802.11a/b/g/n/ac
Channel*1 *+]aFK
*+] 36/40/44/48ch (W52)
149/153/157/161/165ch (W58)
Encryption*2 WPA2-PSK(AES/TKIP), WPA-PSK(AES/TKIP),
WEP(64/128bit)
%DQGZLGWK *+]0+]
*+] 0+]
*1: Available channels may vary according to area.
*2: WEP is only for INFRASTRUCTURE mode.
Wired LAN
Item Description
Standard %$6(7;%$6(7
Port RJ-45
7KHQHWZRUNIXQFWLRQLVQRWDYDLODEOHZKHQ67$1'%<02'(LVVHW
to NETWORK(WOL) or SAVING and the projector is in standby mode. Connect
WKHSURMHFWRUWRWKHQHWZRUNDIWHUVHWWLQJ67$1'%<02'(WR48,&.67$57RU
NORMAL. (SETUP menu in the Operating Guide)
• Depending on the type of wireless network device and computer you are
using, the projector may not be able to communicate properly with your
FRPSXWHUHYHQLIWKHFRPSXWHULVHTXLSSHGZLWKDEXLOWLQZLUHOHVV/$1
function. To eliminate communication problems, use a Wi-Fi®FHUWL¿HGZLUHOHVV
network device.
&RQQHFWWKHRSWLRQDOZLUHOHVVDGDSWHU86%:/*WRWKHWIRELESS port
of the projector when using the wireless LAN. (16 in the Operating Guide)
NOTE

13 QM00483-1
2. Connection to the network
2.1 Connection via wireless LAN
Wireless LAN has two types of connection, Simple Access Point and
Infrastructure.
* Simple Access Point is a mode which connects to computers directly.
This projector can assign IP addresses to up to 10 devices.
* Infrastructure is one of the wireless LAN communication methods with having
an access point to communicate. If communicating with existing network, consult
with your network administrator.
Fig. 2.2.a Without an access point communication (Simple Access Point)
Fig. 2.2.b With an access point communication (Infrastructure)

14 QM00483-1
2. Connection to the network
• If using a wireless network function, please make sure that NETWORK -
WIRELESS NETWORK setting is ON.
• Network settings can also be changed in Network Settings of Projector Web
Control㻚
• Wireless LAN initial settings for the projector are as follows.
Mode: Simple Access Point
IP address: 192.168.10.1
Subnet Mask: 255.255.255.0
SSID: SimpleAccessPoint
66,'%URDGFDVW21
Encryption: OFF
:LUHOHVV)UHT*+]
Channel: 11
• The same network address cannot be used for both wireless LAN and wired
LAN.
• Communication speed of the projector may be deteriorated in Simple Access
Point mode depending on the number of connected devices.
NOTE

15 QM00483-1
2.1.1 Connection in Simple Access Point Mode
Set the following when connecting the projector and the computer in Simple
Access Point mode.
Projector setting
1) Turn on the projector.
2) Press the MENU button on the remote control
or the control panel of the projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU >
NETWORK > NETWORK SETUP >
WIRELESS SETUP
3) Set the following items in WIRELESS SETUP.
• MODE: SIMPLE ACCESS POINT
• IP ADDRESS
• SSID
66,'%52$'&$67
• ENCRYPTION
Select APPLY, then press the ENTEREXWWRQWRUHÀHFWWKHVHWWLQJV
• As for the procedure of setting network and wireless connection for the
computer, refer to the manual of the computer or wireless LAN device.
• Up to 10 devices can be connected to the projector in Simple Access Point mode.
About network settings
䡡㻌7KHIRXUWKRFWHWRIWKHSURMHFWRUV,3DGGUHVVLV¿[HGWR.
䡡㻌6XEQHWPDVNRIWKHSURMHFWRULV¿[HGWR
Computer setting
1) The DHCP server function of the projector is always enabled. Enable the DHCP
setting of the computer.
2) Select SSID set for the projector by following the procedure of wireless
connection of the computer. Enter encryption key by following the computer’s
instruction if it is encrypted.
NOTE
2. Connection to the network

16 QM00483-1
2.1.2 Connection in Infrastructure Mode
Set the following when connecting the projector and the computer in Infrastructure
mode.
Projector setting
1) Turn on the projector.
2) Press the MENU button on the remote control or the control panel of the
projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU > NETWORK > NETWORK SETUP >
WIRELESS SETUP
3) Set the following items in WIRELESS SETUP.
• MODE: INFRASTRUCTURE
• DHCP
• IP ADDRESS
68%1(70$6.
• DEFAULT GATEWAY
• DNS SERVER
• SSID
• ENCRYPTION
As for setting an IP address, refer to About IP address. (19)
Select APPLY, then press the ENTEREXWWRQWRUHÀHFWWKHVHWWLQJV
2. Connection to the network

17 QM00483-1
•㻌Transmission speed may be slow depending on the settings of an access
point.
• If the projector and the computer exist in the same network (i.e., same
QHWZRUNDGGUHVV\RXFDQOHDYHWKHGHIDXOWJDWHZD\¿HOGEODQN
:KHQWKHSURMHFWRUDQGWKHFRPSXWHUH[LVWLQGLႇHUHQWQHWZRUNVWKHGHIDXOW
gateway must be set. Consult with the network administrator in detail.
• Set wireless LAN for the projector by following the instructions of your network
administrator when connecting to the existing network.
• Open System Authentication is used for WEP encryption, and Shared Key
Authentication is not supported. The authentication with an access point
succeeds and it is regarded that the connection is established normally even
when entering illegal encryption key due to Open System Authentication,but
data cannot actually be transmitted.
,3$''5(6668%1(70$6.DQG'()$8/7*$7(:$<VKRXOGEHVHWLQ
advance when DHCP is set to OFF.
• When DNS SERVER at DHCP OFF is set to other than "0.0.0.0", this
projector uses user setting at DHCP OFF as DNS server address even if DHCP
is set to ON and the projector can automatically obtain DNS SERVER setting
from DHCP server.
NOTE
The connection can be set up by selecting from SSID SCAN LIST without setting
SSID and ENCRYPTION in WIRELESS SETUP. The procedure of connecting by
SSID SCAN LIST is as follows.
1) Select SSID SCAN LIST in WIRELESS SETUP on NETWORK - NETWORK
SETUP.
The list of SSID in wireless network is displayed.
2) Select SSID in wireless network that you want to connect in SSID SCAN LIST.
The display to enter the encryption key appears if it is encrypted. Enter the
encryption key by using software keyboard.
3) The icon indicating connected ( ) is displayed in SSID SCAN LIST screen
when the connection is complete.
Connection in Infrastructure Mode (continued)
SSID SCAN LIST function
2. Connection to the network

18 QM00483-1
2. Connection to the network
2.2 Connection via wired LAN
The connection via wired LAN is available. Set wired LAN for the projector by
following the instructions of your network administrator when connecting to the
existing network.
1) Connect the projector to the computer via a hub
with a LAN cable (CAT-5e or higher).
2) Press the MENU button on the remote control or
the control panel of the projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU > NETWORK
> NETWORK SETUP > WIRED SETUP
3) Set the following items in WIRED SETUP.
䡡㻌㻌DHCP
䡡㻌IP ADDRESS
䡡㻌68%1(70$6.
䡡㻌DEFAULT GATEWAY
䡡㻌DNS SERVER
As for setting an IP address, refer to About IP address. (19)
Select APPLY, then press the ENTEREXWWRQWRUHÀHFWWKHVHWWLQJV
ʄConnection setup of wired LAN
hub

19 QM00483-1
• Although HDBaseT and LAN port can be used for wired LAN, they cannot be
used simultaneously. Connect LAN cable to the port set in WIRED NETWORK
on OPTION - SERVICE - CONTROL TERMINAL.
• The same network address cannot be used for both wireless LAN and wired LAN.
• If the projector and the computer exist in the same network (i.e., same network
DGGUHVV\RXFDQOHDYHWKHGHIDXOWJDWHZD\¿HOGEODQN
:KHQWKHSURMHFWRUDQGWKHFRPSXWHUH[LVWLQGLႇHUHQWQHWZRUNVWKHGHIDXOW
gateway must be set. Consult to the network administrator in detail.
• When DNS SERVER at DHCP OFF is set to other than "0.0.0.0", this
projector uses user setting at DHCP OFF as DNS server address even if DHCP
is set to ON and the projector can automatically obtain DNS SERVER setting
from DHCP server.
NOTE
2. Connection to the network
[About IP address]
Ŷ6HWWLQJPDQXDOO\
The Network address portion of the IP address setting on your computer must
be the same as the setting on the projector. Also, the entire IP address on the
computer must not overlap with that of the other devices on the same network,
including the projector.
The projector’s settings are as follows.
IP address: 192.168.1.254
Subnet mask: 255.255.255.0
(Network address: 192.168.1 in this case)
Therefore, specify the computer’s IP address as follows.
IP address: 192.168.1.xxx (xxx shows decimal number.)
Subnet mask: 255.255.255.0
(Network address: 192.168.1 in this case)
For example
6HOHFWIURPWRIRU³[[[´QRWGXSOLFDWLQJZLWKDQ\RWKHUHTXLSPHQWV
In this case, since the IP address of the projector is “192.168.1.254”, specify a
setting between 1 to 253 for the computer.
Ŷ6HWWLQJDXWRPDWLFDOO\
When a DHCP server exists in the connected network, it assigns an IP address
to the projector and the computer automatically. If DHCP server is not available,
VHW,3$''5(6668%1(70$6.'()$8/7*$7(:$<DQG'166(59(5

20 QM00483-1
2.3 Applications
The latest version of the application software can be downloaded from our
website.
For iOS/AndroidTM Network Presentation software, consult our website for the
details and downloads of Projector Quick Connection.
>6\VWHP5HTXLUHPHQWVIRU$SSOLFDWLRQV@
Application Hardware and Software
LiveViewer Refer to the manual of the
application for details.
Projector Quick Connection
Projector Image Tool (PJImg)
Projector Messenger Tool (PJMessenger)
2. Connection to the network