2600 ANSI LUMENS lTRUE XGA lMULTIMEDIA PROJECTOR
PLC-XP40/L
XGA Portable Multimedia Projector
IMPRESSIVE 2600 ANSI LUMENS OF BRIGHTNESS
A 200W short-arc UHP lamp combined with Sanyo’s new
optical system delivers an impressive 2600 ANSI lumens of
brightness.
INTELLIGENT DIGITAL SHARPNESS CONTROL
This high-performance image processing technology analyzes
the incoming signal and controls the sharpness of picture data
only, while text and other elements that are already sharp are
left unprocessed.
3D AUTOMATIC UNIFORMITY CORRECTION CIRCUIT
SANYO’s new 3D Automatic Uniformity Correction Control
circuit helps to ensure natural looking gradation by increasing
the level of control -- more than 10 times that of conventional
methods -- over color problems caused by a lack of brightness
conformity.
3D DIGITAL PROGRESSIVE CIRCUIT
3D sampling for each pixel along with SANYO’s unique
movement detection algorithm program lead to increased
vertical and diagonal resolution on moving video images.
POWER LENS SHIFT
The power lens shift feature allows for greater placement
flexibility by raising or lowering the image without the need of
moving the projector.
HDTV COMPATIBLE
The SANYO PLC-XP40/L is High Definition Television
Compatible, accepting the 1080i, 1035i, 720p, 575p, 575i, 480p
and 480i HDTV resolution standards.
DIGITAL KEYSTONE CORRECTION
SANYO’s digital keystone correction feature compensates for
angled projector placement by digitally altering the pixels to
produce undistorted images.
WHISPER QUIET FAN
The PLC-XP40/L employs a new Whisper Quiet fan which
produces an amazingly low noise level of only 37 dBA.
PRESENTATION TECHNOLOGIES
21605 Plummer Street
Chatsworth, CA 91311
Ph: 818.998.7322 ext. 288
Fax 818.717.2719
www.sanyolcd.com
Specifications
Resolution XGA (1024 x 768)
Brightness (typical) 2600 ANSI Lumens
Uniformity 90%
LCD Panel System 1.3” TFT Poly x 3
Number of Pixels 2,359,296 (786,432 x 3)
Contrast Ratio 500:1 (full on/off)
Projection Image (diagonal) 31”-400”
Aspect Ratio 4:3
Throw Distance 4.6’-47’
Zoom/Focus Powered (1:1.3 zoom)
Up/Down Ratio 10:0 –1:1
Digital Keystone Correction +/-40°
Projection System Polarized Beam Splitter optical system
Projection Lens F1.8-2.1 / f1.9”-2.5”
Lens Throw Ratio 1.8-2.4:1
Projection Lamp 200W UHP
Scanning Frequency H 15-100kHz; V 50-100Hz (auto sense/select)
Dot Clock 160 MHz
Color System PAL/PAL-M/PAL-N/SECAM/NTSC/NNTSC4.43
Computer Compatibility SXGA, XGA, SVGA, VGA
Sound Output Two-piece stereo 2W rms
Voltage 100-240V AC; 50/60/Hz (auto sense/select)
BTU Rating 1024
dB Rating 37.0
Power Consumption 300W
Dimensions (WxHxD) 12.6” x6.6”x16.9”
Net Weight PLC-XP40: 17.4 lbs.; PLC-XP40L: 15.0 lbs.
User Maintenance Clean air filters, replace lamp assembly
Input Terminal Panel 1 1 D-Sub 15 •1 DVI •1 audio (stereo mini jack)
Input Terminal Panel 2 5 BNC (RGBHV) or 3BNC (Video/Y, Cb/Pb, Cr/Pr)
•1 audio (stereo mini jack)
Input Terminal Panel 3 3 RCA (Video/Y, Cb/Pb, Cr/Pr)
•2 RCA Audio (L & R) •1 S-Video
Additional Input Terminals 1 Wired remote control jack (stereo mini jack)
•1 USB •1 Control Port (Mini Din 8-pin)
Included Accessories Wired/Wireless I/R Remote Control w/Mouse Pad
and Laser Pointer •AC power cord •VGA Cable
•Wired remote cable •PS/2, Serial, MAC Control
Cables •MAC/VGA Adapter •Dust cover
•Lens cover •Owner’s manual
Optional Accessories Optional Lenses (see below)
Warranty Three years parts and labor; 90 days lamp;
Quick Repair Program under warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
Optional Lens Specifications
On-Axis
Short Fixed Short Zoom Long Zoom
Part No. LNS-W32 LNS-W31ALNS-T31A
Zoom No Power Power
Throw Ratio 0.8:1 1.3 –1.8:1 2.3 –4.2:1
F Stop 2.6 2.5 –3.1 2.0 –2.9
Length 9.25” 7.6” 8.5”
Weight 3.5 lbs. 3.7 lbs. 4.2 lbs.
Model PLC-XP40L does not include a lens
