Hitachi 26LD6200 User manual

26LD6200
32LD6200
GB
D
F
I
E
Instructions for use
Bedienungsanleitung
Notice d'utilisation
Istruzioni per l'uso
Manual de Instrucciones

- 1 -
Contents
Teletext .................................................. 20
To Operate Teletext ............................ 20
To Select A Page Of Teletext ............... 21
To Select Index Page ......................... 21
To Select Teletext With A TV P
rogramme .......................................... 21
To Select Do ble Height Text ............. 21
To Reveal Concealed Information ... 21
To Stop A tomatic Page Change ....... 21
To Select A S bcode Page ................. 21
To Exit Teletext .................................... 21
To Display The Time .......................... 21
Fastext ................................................ 22
Connect Peripheral Equipment ........... 22
Via The E roconnector ...................... 22
Via Aerial Inp t .................................... 22
Decoder .............................................. 22
TV And Video Recorder ...................... 23
Playback NTSC .................................. 23
Copy Facility ....................................... 23
Search For And Store The Test
Signal Of The Video Recorder ........... 23
Camera And Camcorder .................... 23
Connect The Decoder To The Video
Recorder ............................................ 23
Connecting Headphones .................. 23
Aerial Connections ............................... 24
Tips ........................................................ 25
Care Of The Screen ........................... 25
Poor Pict re ........................................ 25
No Pict re ........................................... 25
So nd ................................................. 25
Remote Control .................................. 25
Specifications ....................................... 26
Remote Control uttons ......................... 2
TFT TV ...................................................... 3
Installation Of The TFT TV To The Wall 5
Preparation ............................................. 7
Feat res ............................................... 7
Panel Feat res .................................... 7
Safety Precautions ................................. 7
efore Switching On Your TV .............. 10
Power Connection ............................. 10
Connections To The Aerial Inp t
Socket ................................................. 10
How To Connect Other Devices ......... 10
Inserting Batteries In The Remote
Control Handset ................................. 10
Switching The TV ON/OFF .................... 10
To switch the TV on: ........................... 10
To switch the TV off: ............................ 10
Operating The TV .................................. 11
Initial APS (A tomatic Programming
System) .............................................. 11
Operating with the b ttons on the
TV set ................................................. 11
Operating With Remote Control ........ 11
pict re men ...................................... 12
When VGA Or DVI Is Connected
To TV: .................................................. 13
window men ..................................... 13
When VGA Or DVI Is Connected
To TV: .................................................. 14
a dio men ........................................ 14
options men ..................................... 15
settings men .................................... 16
aps men ........................................... 16
program table ..................................... 16
programming men ........................... 18
so rce select ..................................... 19
Other Features ...................................... 19
TV Stat s ............................................ 19
Freeze Pict re .................................... 20
So nd Indicator .................................. 20
M te Indicator ..................................... 20
AV Modes ............................................ 20
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:451

- 2 -
Remote Control Buttons
= Stand By
= C rsor Up
= C rsor Right
OK = Okay / Freeze
0 - 9 = Direct Program
= Image size
SWAP = Not sed on this model
P/CH + = Programme Up
+ = Vol me Up
= TV / Q it Men
SOURCE = So rce select
YELLOW
BLUE
= Hold
= Update
= Index Page
= Reveal
= Expand
= Mix
= Teletext
= Time / S bpage
RED
GREEN
= M te
I-II = Mono/Stereo - D al A-B
- = Vol me Down
- P/CH = Programme Down
=Previo s Programme
= Info (Program Table)
M = Men

= C rsor Down

= C rsor Left
79
2.
,,,
6285&(
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:452

- 3 -
TFT TV
FRONT VIEW
REAR VIEW
67$1'%< 79$9 0(18 3&+ 92/80(
2Q2II
VZLWFK
3RZHUFRUG
LQSXW
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:453

- 4 -
Headphone
A dio Inp t (Left, Right)
Video Inp t
S-VHS Inp t
STAND BY b tton
TV/AV b tton
MENU b tton
Program Up, Program Down b ttons
Vol me Up, Vol me Down b ttons
Power cord inp t
On/Off switch
Antenna
A dio Line O t L, R
Scart 1
Scart 2
A dio In (for VGA and DVI so rce)
DVI Inp t
VGA Inp t
} F ll Scart
69+6
69+6
/
/
5
5
67$1' %< 79 $9 0(18 3 &+ 92/80 (
67$1'%<
781(5
'9,3&$8',2 3&,1387

79$9 0(18 3&+ 92/80(
99
$&a+]
32:(5
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:454

- 5 -
Installation Of The TFT TV To The Wall
1- To install the TFT TV on the wall, first of all, foot assembly sho ld be removed. (Fig re 1).
Unscrew the 4 screws (M4 x 6) that attach the foot assembly to the TFT panel and remove
the foot assembly from the TFT panel.
2- Place the 4 plastic pins to the circ lar screw holes at the rear of the TFT and screw them to
the TFT panel with 4 (M6 x 20) screws.
3- Install the wall hanger as in fig re 2 to the wall with 4 anchors (M7 x 30) and 4 screws (M4
x 30).
Decide the place on the wall where the TFT panel wo ld be placed. Level and mark with a
pencil the 4 mo nting points on the wall hanger. Drill pilot holes for the plastic anchors and
then fix the wall hanger with 4 screws (M4 x 30).
4- Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging
screws at the rear of the TFT panel.
),*85(
)227$66(0%/<
7)73$1(/
6&5(:6
0;
6&5(:+2/(6
)253/$67,&3,16
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:455

- 6 -
),*85(
:$//+$1*(5
3/$67,&$1&+25
0[
7)73$1(/
6&5(:
0[
:$//
6&5(:+2/(6)253/$67,&3,16
:$//+$1*(5
PP
PP
3/$67,&3,16
6&5(:6
0[
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:456

- 7 -
Preparation
For ventilation, leave a space of at least 10
cm free all aro nd the set. To prevent any
fa lt and nsafe sit ations, please do not
place any objects on top of the set.
Use this apparat s in tropical and/or moder-
ate climates.
Features
 It is a remote controlled colo r television.
 100 programmes from VHF, UHF bands or
cable channels can be preset.
 It can t ne cable channels.
 Controlling the TV is very easy by its men
driven system.
 It has 2 E roconnector sockets for external
devices (s ch as video, video games, a -
dio set, etc.)
 Stereo so nd system (German+Nicam).
 F ll f nction Teletext .
Fastext (10 Pages), TOP text.
 It is possible to connect headphone.
 Direct channel access.
 A.P.S. (A tomatic Programming System).
 All programmes can be named.
 Programme swapping between last
watched two programmes.
 Forward or backward a tomatic t ning.
 Sleep timer.
 A tomatic so nd m te when no transmis-
sion.
 Fill all (16:9), zoom, letterbox, s btitles, nor-
mal (4:3), 14:9, A to switch WSS (Wide
Screen Signaling).
 NTSC Playback.
 Front SVHS is available.
 Front AV in is available.
 It has VGA and DVI connector for external
devices s ch as comp ter.
 AVL (A tomatic Vol me Limiting)
 When no valid signal is detected, after 5
min tes the TV switches itself a tomatically
to stand-by mode.
 PLL (Channel Search)
 PC inp t (S pport Up to WXGA 1280 x 768)
 1 SVHS Inp t and 1 RCA AV Inp t are avail-
able.
 Headphone o tp t.
 Stereo PC A dio Inp t
 Pl g&Play for Windows 9X, ME, 2000, XP
 4H Comb Filter
 A dio Line O t
Panel Features
 High resol tion, 26-inch TFT LCD display.
 WXGA resol tion (1280 x 768)
 Contrast ratio (500:1 typical)
 Brightness (typical) 450 cd/m2.
 Response time (typical) 16 msec.
 Viewing angle (typical) 176° (horizontal) and
176° (vertical).
 Display colo r 16.7 Million.
Safety Precautions
IMPORTANT SAFETY
INFORMATION ON OPERATING
YOUR TV
Dos and Donts
DOs
This Television has been designed and man -
fact red to meet international safety standards,
b t like any electrical eq ipment, care m st be
taken if yo are to obtain the best res lts and
safety is to be ass red.
DO read the operating instr ctions before yo
attempt to se the eq ipment.
DO cons lt yo r dealer if yo are in any do bt
abo t installation, operation or safety of yo r
eq ipment.
DO be caref l with glass panels or doors on
eq ipment.
This TV is s pplied with a fitted mains pl g.
This pl g m st not be c t off as it may contain
a special radio interference filter, the removal
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:457

- 8 -
of which co ld lead to impaired performance.
If yo wish to extend the lead, obtain an appro-
priate safety approved extension lead or con-
s lt yo r dealer.
Observe the man fact rers instr ctions when
connecting extension leads to the TV. Check
the f se rating on the new pl g, this sho ld be
fitted with a 5 Amp f se which conforms to ei-
ther ASTA or BSI (BS1 362) approvals, these
are easily identifiable by either the or
symbols. If yo are in any do bt abo t the in-
stallation of an extension lead, please cons lt
a competent electrician.
DONTs
DONT contin e to operate the eq ipment if
yo are in any do bt abo t it working normally,
or if it is damaged in any way switch off, with-
draw the mains pl g and cons lt yo r dealer.
DONT place water filled vessels on top of T.V.
cabinets.
DONT remove any fixed cover as this may ex-
pose dangero s voltages.
DONT leave eq ipment switched on when it is
nattended nless it is specifically stated that
it is designed for nattended operation or has
a stand-by mode. Switch off sing the switch
on the eq ipment and make s re yo r family
know how to do this. Special arrangements
may need to be made for infirm or handi-
capped people.
DONT se eq ipment s ch as personal ste-
reos or radios so that yo are distracted from
the req irements of traffic safety. It is illegal to
watch television whilst driving.
DONT obstr ct the ventilation of the eq ipment,
for example with c rtains or soft f rnishings.
Overheating will ca se damage and shorten
the life of the eq ipment.
DONT se makeshift stands and NEVER fix
legs or stands to the TV with any screws other
than those provided - to ens re complete safety
always se the man fact rers approved stand
with the fixings provided.
DONT allow electrical eq ipment to be ex-
posed to rain or moist re.
ABOVE ALL
 NEVER let anyone, especially children
push anything into holes, slots or any
other opening in the case - this could re-
sult in a fatal electric shock.
 NEVER guess or take chances with elec-
trical equipment of any kind - it is better to
be safe than sorry
. Power Source
The receiver sho ld be operated only from a
220-240V AC, 50 Hz. o tlet. Ens re yo se-
lect the correct voltage setting for yo r conve-
nience.
2. Power Cord
The power s pply cord sho ld be placed so
that it is not likely to be walked on or pinched
by items placed pon them or against it. Pay
partic lar attention to cord where it enters
the pl g, power o tlet, and the point where it
exits from the receiver.
3. Moisture and Water
Do not se this eq ipment in a h mid and
damp place (avoid the bathroom, the sink in
the kitchen, and near the washing machine).
Do not expose this eq ipment to rain or wa-
ter, as this may be dangero s and do not
place objects filled with liq ids on top. Avoid
from dripping or splashing.
4. Cleaning
Before cleaning, npl g the receiver from
the main s pply, o tlet. Do not se liq id or
aerosol cleaners. Use soft and dry cloth.
5. Ventilation
The slots and openings on the receiver are
intended for ventilation and to ens re reli-
able operation. To prevent overheating,
these openings m st not be blocked or cov-
ered in anyway.
6. Lightning
In case of storm and lightning or when go-
ing on holiday, disconnect the power cord
from the wall o tlet.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:458

- 9 -
"The LCD panel is very high technology
product with about a million thin film tran-
sistors, giving you fine picture details. Oc-
casionally, a few non-active pixels may ap-
pear on the screen as a fixed point of blue,
green or red. Please note that this does
not affect the performance of your prod-
uct."
DO NOT LEAVE YOUR TV AT STAND- Y
OR OPERATING WHEN YOU LEAVE YOUR
HOUSE
7. Replacement Part
When replacement parts are req ired, be s re
the service technician has sed replacement
parts which are specified by the man fact rer
or have the same specifications as the origi-
nal one. Una thorised s bstit tions may re-
s lt in fire, electrical shock, or other hazards.
8. Servicing
Please refer all servicing to q alified per-
sonnel. Do not remove cover as this may re-
s lt in electric shock.
9. Naked Flame Sources
Do not place naked flame so rces on the
apparat s.
WARNING: When the device is not in use
for a long time, disconnect from power.
Instructions for waste disposal:
 Packaging and packaging aids are recy-
clable and should principally be recycled.
Packaging materials, such as foil bag, must
be kept away from children.
 Battery, including those which is heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an environmentally sound man-
ner. Find out about the legal regulations
which apply in your area.
 old cathode fluoresant lamp in L D PANEL
contains a small amount of mercury, please
follow local ordinates or regulations for dis-
posal.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:459

- 10 -
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to op-
erate on 220-240V AC, 50 Hz.
 After npacking, allow the TV set to reach the
ambient room temperat re before yo con-
nect the set to the mains.
Connections To The Aerial Input
Socket
9+)8+)
 :
5($52)7+(79
&$%/(79
 Connect the aerial or cable TV pl g to the
Aerial socket located at the back of the TV.
If yo are also connecting a VCR, pl g the
aerial cable into the aerial inp t socket on
the VCR and then connect the RF o tp t
cable from the RF o t socket on the VCR to
the TV aerial socket. See P24 for f rther de-
tails.
How To Connect Other Devices
IMPORTANT: Switch off the TV before con-
necting any external device.
Sockets for external connections are at the
back and side of the TV. For connection of
other devices via E roconnector refer to the
man als of the related devices.
Inserting Batteries In The Remote
Control Handset
 Place the batteries in the right directions as
seen below.
 Remove the battery cover located on the
back of the handset by gently p lling p-
wards from the indicated part.
 Insert two MN2400 AAA or eq ivalent type
batteries inside.
 Replace the battery cover.
NOTE: Remove batteries from remote con-
trol handset when it is not to be used for a
long period.Otherwise it can be damaged
due to any leakage of batteries.
Switching The TV ON/OFF
To switch the TV on:
Yo r TV will switch on in two steps:
1- Connect the power s pply cord to the sys-
tem. Press On/Off switch at the rear of the
TV. Then the TV switches itself to stand-by
mode and the led becomes red located on
the front of the TV.
2- To switch on the TV from stand-by mode
either:
Press a digit b tton on the remote control so
that a programme n mber is selected,
or,
Press  , "-P/CH" or "P/CH+" b tton at the
top of the TV or press -P/CH or P/CH+
b tton on the remote control, so that last
switched off mode is selected.
By either ways the TV will switch on and the
led becomes green.
To switch the TV off:
 Press the stand-by b tton on the remote
control, so the TV will switch to stand-by
mode and the GREEN LED will become
RED,
or,
Press the   b tton located on the top of
the TV, so the TV will switch off and the
GREEN LED will become RED.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4510

- 11 -
To power down the TV completely, press
On/Off switch,
or
npl g the power cord from the mains
socket.
Operating The TV
Yo can operate yo r TV both sing the re-
mote control handset and onset b ttons.
Initial APS (Automatic Programming
System)
The following men will be displayed on the
screen when yo t rn on yo r TV for the first
time. APS, searches and sorts all channels
and stores them a tomatically on yo r TV,
according to the transmission of
programme systems in yo r area.
LQLWLDODSV
8.
RN!WRHQDEOH
SOHDVHFKHFNWKHDQWHQQDFDEOH
79!WRFDQFHO
ULJKWOHIWWRFKDQJHODQJXDJH
ODQJXDJH
FRXQWU\
DXWRVHW
HQJOLVK
To cancel APS before starting, press TV
b tton. First of all choose language and
country by sing   /   and   /   b t-
tons. This, will effect the sort process in
APS. To start aps select autoset, by sing
 /   b ttons and press   /   or OK
b tton.
FKDQQHOVHDUFKLQJ
SOHDVHZDLWRU
SUHVVPHQXWRFDQFHO
After APS is finalized, the programme table
will be appeared on the screen. In the
programme table yo will see the
programme n mbers and names assigned
to the programmes.
If yo do not accept the locations and / or the
programme names of programmes, yo
can change them in APS s bmen in the
settings men . (See page 17 for Program
table explanation.)
Operating with the buttons on the
TV set
Vol me setting and programme selection
can be made by sing the b ttons at the
control panel on the top of the TV.
Volume Setting
Press "VOLUME -" b tton to decrease vol-
me or "VOLUME +" b tton to increase vol-
me, so a vol me level scale (slider) will be
displayed at the middle of the bottom on the
screen.
YROXPH
PHQXWRUHWXUQ ULJKWOHIWWRDGMXVW
Programme Selecting
Press "P/CH+" b tton to select the next
programme or "PCH-" b tton to select the
previo s programme.
"P/CH+ / PCH-" and "VOLUME + / VOLUME -
" b ttons on the TV are sed as navigation
b ttons in men .
Entering The Menu
Press "MENU" b tton at the control panel on
the top of the TV to enter the men .
"P/CH+ / PCH-" and "VOLUME + / VOLUME -
" b ttons at the control panel on the top of
the TV work as direction b ttons in the
men .
AV Mode
Press "TV / AV" b tton at the control panel
on the top of the TV to switch yo r TV to AV
mode (See AV Modes in page 20).
Operating With Remote Control
The remote control handset of yo r TV is de-
signed to control all the f nctions of the
model yo selected. The f nctions will be
described in accordance with the men sys-
tem of yo r TV.
F nctions of the men system are de-
scribed in Men System section.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4511

- 12 -
Volume Setting
Press " +" b tton to increase vol me.
Press "- " b tton to decrease vol me. A
vol me level scale (slider) will be displayed
at the middle of the bottom on the screen.
79
,,,
6285&(
YROXPH
PHQXWRUHWXUQ ULJKWOHIWWRDGMXVW
Programme Selecting
(Previo s or next programme)
 Press - P/CH b tton to select the previo s
programme.
 Press P/CH + b tton to select the next
programme.
Programme Selecting (direct access):
Press digit b ttons on the remote control
handset to select programmes between 0
and 9. TV will switch to the selected program
after a short delay.
 For a two digit program n mber enter the
second digit after pressing the first digit
within 2 seconds.
Menu System
Yo r TV has been designed with a men
system to provide an easy manip lation of a
m ltif nction system. Press the M (MENU)
b tton to enter the men . M b tton has
two f nctions. The first f nction of it is open
and close the men , the second f nction is
closing the s bmen and then opening its
parent men .
Press   /   b tton to select a men title
and then   /   b tton to select a men
item and   /   or OK b tton to enter the
men item. To exit a men press "M" b t-
ton.
picture menu
By pressing   /   b tton, select the first
icon. Pict re men appears on the screen.
GRZQIRUSLFWXUHVHWWLQJVIRUFXUUHQWZLQGRZ
EULJKWQHVV
FRQWUDVW
VKDUSQHVV
FRORU
SLFWXUH




brightness
By pressing   /   b tton, select bright-
ness. right/left to adjust brightness is
seen on the screen. Press   b tton to in-
crease brightness. Press   b tton to de-
crease brightness. Brightness level can be
adj sted between 0 and 100.
contrast
By pressing   /   b tton, select con-
trast. right/left to adjust contrast is seen
on the screen. Press   b tton to increase
contrast. Press   b tton to decrease con-
trast. Contrast level can be adj sted be-
tween 0 and 100.
sharpness
By pressing   /   b tton, select sharp-
ness. right/left to change sharpness is
seen on the screen. Press   b tton to in-
crease sharpness. Press   b tton to de-
crease sharpness. Sharpness level can be
adj sted between 0 and 8.
colour
By pressing   /   b tton, select colour.
right/left to adjust colour is seen on the
screen. Press   b tton to increase colo r.
Press   b tton to decrease colo r. Colo r
level can be adj sted between 0 and 100.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4512

- 13 -
tint
This item is displayed in pict re men when
TV is in AV mode and at NTSC signal. By
pressing   /   b tton, select tint. "right/
left to adjust tint" is seen on the screen.
Press   b tton to increase tint. Press  
b tton to decrease tint. Tint level can be ad-
j sted between 0 and 100.
GRZQIRUSLFWXUHVHWWLQJVIRUFXUUHQWZLQGRZ
EULJKWQHVV
FRQWUDVW
VKDUSQHVV
FRORU
WLQW
SLFWXUH





When TV is in AV mode; pict re men items
(brightness, contrast, sharpness and
colo r) may req ire re-adj stment.
When VGA Or DVI Is Connected To
TV:
GRZQIRUSLFWXUHVHWWLQJVIRUFXUUHQWZLQGRZ
EULJKWQHVV
FRQWUDVW
SKDVH
SLFWXUH



RSWLRQDO
brightness
By pressing   /   b tton, select bright-
ness. "right/left to adjust brightness" is
seen on the screen. Press   b tton to in-
crease brightness. Press   b tton to de-
crease brightness. Brightness level can be
adj sted between 0 and 100.
contrast
By pressing   /   b tton, select con-
trast. "right/left to adjust contrast" is seen
on the screen. Press   b tton to increase
contrast. Press   b tton to decrease con-
trast. Contrast level can be adj sted be-
tween 0 and 100.
phase
This item is not available in the pict re
men when DVI is connected to the TV.
By pressing   /   b tton, select phase.
"right/left to adjust phase" is seen on the
screen. Press   b tton to increase phase.
Press   b tton to decrease phase. Phase
level can be adj sted between 0 and 100.
window menu
By pressing   /   b tton, select the sec-
ond icon. Window men appears on the
screen.
GRZQIRUVL]HVHWWLQJ
LPDJHVL]H
ZLQGRZ
ILOODOO
image size
By pressing   /   b tton, select image
size. "right/left to change image size" is
seen on the screen. By pressing   /  
b tton, yo can change image size to fill all,
zoom, letterbox, subtitles, normal, 14:9 and
auto.
Yo can enter image size directly by press-
ing   b tton.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4513

- 14 -
When VGA Or DVI Is Connected To TV:
GRZQIRUVL]HVHWWLQJ
LPDJHVL]H
ZLQGRZ
ILOODOO
image size
By pressing   /   b tton, select image
size. "right/left to change image size" is
seen on the screen. By pressing   /  
b tton, yo can change image size to fill all,
fill 1:1 and fill aspect.
audio menu
By pressing   /   b tton, select the third
icon. A dio men appears on the screen.
GRZQIRUDXGLRDGMXVWPHQWV
YROXPH
KSYROXPH
EDODQFH
HTXDOL]HU
DXGLR



KSVRXQGPRGH PRQR
$9/
ZLGHVRXQG
G\QDPLFEDVV
RQ
RQ
RQ
volume
By pressing   /   b tton, select volume.
"right/left to adjust volume" is seen on the
screen. Press   b tton to increase vol-
me level. Press   b tton to decrease vol-
me level. Vol me level can be adj sted be-
tween 0 and 54.
headphone volume
By pressing   /   b tton, select hp vol-
ume. "right/left to adjust hp volume" is
seen on the screen. Press   b tton to in-
crease hp vol me level. Press   b tton to
decrease hp vol me level. Hp vol me
(headphone vol me) level can be adj sted
between 0 and 100.
hp sound mode
By pressing   /   b tton, select hp
sound mode. "right to adjust hp sound
mode" is seen on the screen. Press  
b tton change hp so nd mode.
Hp so nd mode is sed to identify so nd
mode of the headphone. hp so nd mode can
be set to mono, stereo, dual a or dual b ac-
cording to the transmission.
balance
By pressing   /   b tton, select balance.
"right/left to adjust balance" is seen on the
screen. Press   b tton to increase bal-
ance to the right. Press   b tton to de-
crease balance to the left. Balance level can
be adj sted between -50 and 50.
equalizer
By pressing   /   b tton, select equal-
izer. "right/left for equalizer settings" is
seen on the screen. Press   /   or OK
b tton to enter eq alizer men . In eq alizer
men the so nd mode can be changed to
user, flat, pop, rock, jazz and classic by
pressing   /   b tton. Eq alizer men
settings can be changed only when sound
mode is user. Select the desired freq ency
by   /   b tton and increase or decrease
the freq ency gain by pressing   /   b t-
ton.
M b tton to exit the eq alizer men .
+]
+]
N+]
N+]
N+]
VRXQGPRGH





XVHU
AVL
By pressing   /   b tton, select AVL.
"right/left for AVL on/off" is seen on the
screen. By pressing   /   b tton set to
AVL on to activate it or off to deactivate it.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4514

- 15 -
wide sound
It is sed to gain saloon effect to the so nd.
By pressing   /   b tton, select wide
sound. "right/left for wide sound off/stereo/
mono" is seen on the screen. By pressing
 /   b tton set to wide so nd on to acti-
vate it or off to deactivate it.
dynamic bass
Dynamic Bass is sed to increase bass ef-
fect of the TV set.
By pressing   /   b tton, select dynamic
bass. "right/left for dynamic bass on/off" is
seen on the screen. By pressing   /  
b tton set to dynamic bass on to activate it
or off to deactivate it.
options menu
By pressing   /   b tton, select the
fo rth icon. Options men appears on the
screen.
GRZQIRUYDULRXVV\VWHPRSWLRQV
ODQJXDJH
RVGWLPHRXW
PHQXEDFNJURXQG
VFDUWRXW
VOHHSWLPHU
VOHHSWLPHUHPDLQLQJ
RSWLRQV
VHF VHF VHF
WUDQVOXFHQW
PLQXWHV
PLQXWHV
6FDUW
HQJOLVK
FKLOGORFN RQ
RII
language
By pressing   /   b tton, select lan-
guage. "right/left to change language" is
seen on the screen. By pressing   /  
b tton, yo can select the lang age.
vcr
This item is displayed only when TV is in AV
mode. By pressing   /   b tton, select
vcr. "right/left to change vcr status" is
seen on the screen. By pressing   /  
b tton set vcr to on or off.
GRZQIRUYDULRXVV\VWHPRSWLRQV
ODQJXDJH
RVGWLPHRXW
PHQXEDFNJURXQG
VFDUWRXW
VOHHSWLPHU
VOHHSWLPHUHPDLQLQJ
RSWLRQV
VHF VHF VHF
WUDQVOXFHQW
PLQXWHV
PLQXWHV
6FDUW
HQJOLVK
YFU
RQ RII
FKLOGORFN RQ
RII
osd timeout
By pressing   /   b tton, select osd
timeout. "right/left to change osd timeout"
is seen on the screen. By pressing   /  
b tton, yo can change osd timeo t to 5
sec, 15 sec or 60 sec.
menu background
By pressing   /   b tton, select menu
background. "right to change menu back-
ground" is seen on the screen. Yo can
change men backgro nd to translucent or
opaque by pressing   b tton.
child lock
Yo can se this feat re to prevent children
t rning on TV or changing programs or ad-
j stments etc. witho t remote control.
By pressing   /   b tton, select child
lock. "right/left to change" is seen on the
screen. The child lock feat re can be set by
 or   b tton to either on or off. When
off is selected, there will be no difference in
the operation of yo r TV. When on is se-
lected, the TV can only be controlled by the
remote control handset.
scart 2 out
By pressing   /   b tton, select scart 2
out. "right/left to select scart 2 out" is seen
on the screen. Yo can set scart 2 o t to
Scart 1, Tuner or FAV by pressing   /  
b tton.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4515

- 16 -
sleep timer
By pressing   /   b tton, select sleep
timer. "adjust sleeptimer" is seen on the
screen. Yo can set the sleep time to Off,
15, 30, 60, 90 or 120 minutes by pressing
 /   b tton. The sleep timer is sed to
t rn the TV off after a pre-defined period.
sleep time remaining
Selected and remaining sleep time is dis-
played at this area. Sleep time remaining
item can not be selected by   /   b tton.
settings menu
By pressing   /   b tton, select the fifth
icon. Settings men appears on the screen.
GRZQIRUYDULRXVV\VWHPVHWWLQJV
WY WXQHU
VRXUFHVHOHFW
VHWWLQJV
tv tuner
By pressing   /   b tton, select tv tuner.
"<ok> to activate tuner menu" is seen on
the screen. By pressing   /   or OK
b tton enter the men . tv tuner men has
two s b-men named as aps and pro-
gramming.
GRZQWRFKDQJHDSVRSWLRQV
DSV
SURJUDPWDEOH
FRXQWU\
DXWRVHW
*HUPDQ\
RN!WRHQDEOH
GRZQWRSURJUDPPLQJRSWLRQV
SURJUDPPLQJ
SURJUDP
ILQHWXQH
FKDQQHO
VWDQGDUG
FKDQQHOW\SH
HGLWODEHOV
VWRUHSURJUDP
PDQXDOVHDUFK
WUNL\H 


& 6
%*
aps menu
By pressing   /   b tton in tv t ner men
select the second icon. aps men appears
on the screen.
GRZQWRFKDQJHDSVRSWLRQV
DSV
SURJUDPWDEOH
FRXQWU\
DXWRVHW
*HUPDQ\
RN!WRHQDEOH
program table
By pressing   /   b tton, select pro-
gram table. "right/left to enter program
table" is seen on the screen. By pressing
 /   or OK b tton, yo can enter the
following program table.
Programme table is also entered directly by
pressing   b tton.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4516

- 17 -
&11
5$,
6$7
5$,
79
=')
5$
&
6
&




















'HOHWH ,QVHUW 1DPH
SURJUDPWDEOH
By moving the c rsor in fo r directions yo
can reach 30 programmes in the same
page. By scrolling the pages p or down by
pressing the navigation b ttons yo can se-
lect all the programmes in TV mode (except
the AV mode).
In program table,   /   b ttons work like
"Direction Up" and "Direction Down". By c r-
sor action, programme selection is done a -
tomatically.
Programme N mber is between 01 and 99.
00 is not displayed on program table.
Programme Name has a name string with 5
characters. After a toset process the
Programme Names are set to "C02" or
"S07" (channel type and channel n mber)
or name of the t ned channel if defined.
At the bottom of the program table there is a
programme sort f nctions section. Each
f nction is activated by colo r b tton (seen
above). By pressing Delete yo can delete
programmes that yo have selected. Insert
section is for inserting programmes into an-
other programme spaces. Name allows
changing the programme name.
Delete:
For "Delete" process RED b tton is
pressed. The following warning men
comes to screen. Pressing M b tton can-
cels the activated "Delete" process. Press-
ing OK b tton erases the selected
programme from the programme list, and
the programmes below shift one p.
$UH\RXVXUH\RXZDQWWRGHOHWH"
&DQFHO 'HOHWH
0! 2.!
Insert:
Select the program which yo want to insert
by navigation b ttons. Press GREEN b tton.
By navigation b ttons move the selected
program to the decided programme space
and press GREEN b tton again.
Name:
To change the name of a decided
programme, that programme is selected
and pressed to the YELLOW b tton. The fol-
lowing men comes to screen.
=')
XSGRZQOHIWULJKWWRHGLWODEHO
VRXUFH!WRFOHDUODEHO
PHQX!WRUHWXUQ
The first letter of the selected name is high-
lighted. To change that letter   /   b tton
can be sed, and to select the other letters,
 /   b tton can be sed. If the c rsor is
at the last letter of the Programme Name,
pressing   b tton moves the c rsor at the
beginning. On the contrary, if the c rsor is at
the beginning of the Programme Name,
pressing   b tton moves the c rsor at the
end.
country
By pressing   /   b tton, select country.
"right/left to change country" is seen on
the screen. By pressing   /   b tton, yo
sho ld select the co ntry where yo are.
autoset
By pressing   /   b tton, select autoset.
"right/left to start aps function" is seen on
the screen. When   /   or OK b tton is
pressed, the following men comes to the
screen. If yo want to cancel a toset f nc-
tion, press M b tton. Yo ret rn to aps
men .
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4517

- 18 -
If yo press M b tton after a toset is
started, program table appears on the
screen.
$OOSUHVWRUHGSURJUDPV
ZLOOEHGHOHWHG
FDQFHO VWDUW
0! 2.!
If OK b tton is pressed, a toset f nction
starts and the following men comes to the
screen.
FKDQQHOVHDUFKLQJ
SOHDVHZDLWRU
SUHVVPHQXWRFDQFHO
After a toset is finalized, the program table
comes to the screen.
programming menu
By pressing   /   b tton in tv tuner
men select the first icon. Programming
men appears on the screen.
GRZQWRSURJUDPPLQJRSWLRQV
SURJUDPPLQJ
SURJUDP
ILQHWXQH
FKDQQHO
VWDQGDUG
FKDQQHOW\SH
HGLWODEHOV
VWRUHSURJUDP
PDQXDOVHDUFK
WUNL\H 


&
6
%*
program
By pressing   /   b tton, select pro-
gram. "right/left to select program" is seen
on the screen. By pressing   /   b tton,
yo can select the program n mber. Yo
can also enter a n mber via digit b ttons on
the remote control. There are 100 program
storage between 0 and 99.
fine tune
By pressing   /   b tton, select fine
tune. "right/left to adjust fine tuning" is
seen on the screen. By pressing   /  
b tton, yo can adj st the t ning. The adj st
val es are between -50 and +50.
channel
By pressing   /   b tton, select channel.
"right/left to change channel" is seen on
the screen. By pressing   /   b tton, yo
can change the channel n mber. Yo can
also enter a n mber via digit b ttons on the
remote control. The adj st val es change
according to the standard and channel type.
standard
By pressing   /   b tton, select stan-
dard. "right/left to change standard" is
seen on the screen. By pressing   /  
b tton, yo can change the standard to /G,
D/K, I or L/L'. (optional)
channel type
By pressing   /   b tton, select channel
type. "right/left to change channel type" is
seen on the screen. By pressing   /  
b tton, yo can change the channel type to C
or S.
edit labels
By pressing   /   b tton, select edit la-
bels. "right/left to edit labels" is seen on
the screen. By pressing   /   or OK
b tton, yo can enter the following men .
=')
XSGRZQOHIWULJKWWRHGLWODEHO
VRXUFH!WRFOHDUODEHO
PHQX!WRUHWXUQ
 /   or   /   b ttons are sed to edit
labels.
store program
By pressing   /   b tton, select store
program. "right/left to store program" is
seen on the screen. By pressing   /   or
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4518

- 19 -
OK b tton, yo can store the program and
following men appears on the screen.
SUR
J
UDPVWRUHG
manual search
By pressing   /   b tton, select manual
search. "right/left to search" is seen on the
screen. By pressing   or   b tton, yo
can start program searching and following
men appears on the screen.
FKDQQHOVHDUFKLQJ
SOHDVHZDLWRU
SUHVVPHQXWRFDQFHO
source select
By pressing   /   b tton, select source
select in settings men . "<ok> to activate
source selection menu" is seen on the
screen. By pressing   /   or OK b tton,
yo can enter the so rce select men .
WXQHU
6FDUW
6FDUW5*%
6FDUW
6FDUW5*%
3&
'9,
)$9
69LGHR
VRXUFHVHOHFW
ULJKWWRVHOHFWVRXUFH
In so rce select men , come on one of the
so rces by pressing   /   b tton and
select it by pressing   b tton. The so rce
types are tuner, Scart 1, Scart 1 RG , Scart
2, Scart 2 RG , PC, DVI, FAV and S-Video.
Other Features
TV Status
Programme Number, Programme Name
and Sound Indicator are displayed on the
pper right side of the screen. Source is
also displayed with them on the right bottom
side of the screen. They are displayed after
programme change d ring 3 seconds.
3
Programme N mber
35

Programme Name (5 characters)
These OSDs are displayed when a new
programme is entered by digit b tton, by
pressing P<P b tton or -P/CH or P/CH+
b tton or TV b tton.
79
,,,
6285&(
Previous Programme
 Press "P<P" (Previo s Programme) b tton
to select the last selected programme. This
b tton provides swapping between last two
selected programmes. For example, select
programme 8, then select programme 2.
Now, if yo press "P<P" b tton, programme
8 will be selected. If yo press the same
b tton again, programme 2 will be selected
and so on.
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 27.12.2004, 08:4519