Hitachi 32HXT16U User manual

INSTRUCTION MANUAL
32’’ Colour TV
32HXT16U
Important - Please read these instructions fully before installing or operating and keep for future
reference.
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
114/7735

English - 1 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Contents
Safety Information ..................................................2
Preparation.........................................................2
Intended Use ......................................................2
Power source......................................................3
Positioning the TV............................................... 3
Power cord and plug...........................................3
Moisture and Water ............................................3
Ventilation...........................................................3
Heat sources and Flames...................................4
Headphone Volume............................................4
Wall Mounting (optional).....................................4
LCD Screen........................................................4
Cleaning..............................................................4
Batteries..............................................................4
Replacement Parts.............................................4
Taking out of service and storing........................ 4
Connection to a Television Distribution System
(Cable TV etc.) from Tuner................................. 4
Symbols in this Instruction Book......................... 5
Getting Started .......................................................6
Support...................................................................6
Environmental Information ..................................... 7
Accessories included.............................................. 7
Optional Accessories..............................................7
TV - Features .........................................................7
Viewing the TV ......................................................8
TV Control button & Operation............................... 8
Viewing remote control - TV...................................9
Using a Conditional Access Module......................11
Standby Notications.............................................11
Installing the Batteries to the Remote...................12
Connect Power ....................................................12
Antenna / Cable Connection.................................... 12
Switching On/Off...................................................12
To Switch the TV On.........................................12
To Switch the TV Off......................................... 12
First Time Installation............................................ 12
Aerial Installation ..............................................13
Media Playback via USB Input............................. 13
Media Browser Menu........................................13
Using MENU button in Media Browser Mode... 14
Changing Image Size: Picture Formats................ 14
Using the Channel List ......................................... 14
Sorting Channel List ......................................... 14
Quick Menu ..........................................................14
Menu Features and Functions.............................. 15
Menu Features and Functions.............................. 16
Menu Features and Functions.............................. 17
Electronic Programme Guide (EPG) .................... 18
Connectivity Functions .........................................18
Connecting to a Wired Network........................ 18
Connecting to a Wireless Network....................19
Conguring Network Settings ........................... 19
Conguring Wired Device Settings................... 19
Network Type....................................................19
Conguration Status .........................................20
IP Address ........................................................20
Conguring Wired Network Settings in Advanced
Mode.................................................................20
Conguring Wireless Device Settings (Optional) .... 20
Information........................................................20
Connecting to your Cell Phone via WiFi
(Optional)..........................................................21
Connectivity Troubleshooting ...............................21
Wireless Network Not Available........................ 21
Connection is Slow...........................................21
Distruption during playback or slow reactions .. 21
Using DLNA Network Service........................... 21
Step 1: Nero Media Home Installation.............. 21
Step 2: Connect to a Wired or Wireless Network.... 21
Step 3: Play Shared Files via Media Browser...21
Internet Portal.......................................................22
Teletext.................................................................23
Digital Teletext (for UK only)............................. 23
Software Upgrade.................................................23
Troubleshooting & Tips......................................... 23
Image persistence - ghosting............................23
No power ..........................................................23
Poor picture ......................................................23
No picture .........................................................23
No sound ..........................................................23
Remote control - does not operate.................. 23
Input sources - can not be selected.................. 24
Internet Connection Not Available / DLNA Mode
Not Operating ...................................................24
Invalid Domain .................................................24
DVB-T functionality information............................ 24
To Program Your SKY Remote For Your TV......... 24
PC Typical Display Modes ...................................25
Specications .............................................................26
Licence Notications.............................................26
Disposal information.............................................26
Supported File Formats for USB Media Browser . 27
Supported DVI Resolutions.................................. 28
Appendix: Nero MediaHome Installation.............. 29
Getting Started with Skype...................................32
Sign In & Sign Up Now.....................................33
Adding a contact...............................................34
Recent history...................................................34
Actions..............................................................35
Incoming call.....................................................36
Dialing Phones..................................................36
Settings.............................................................36
Guarantee.............................................................37

English - 2 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Safety Information
Don’t operate your TV in extreme ambient
conditions as this may cause damage to your TV..
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note : Follow the on screen instructions for operating the
related features.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude
toconstitute arisk ofelectric shockof persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Preparation
Place the device on a solid even surface. For
ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, do not place any objects on top of the set.
Use this device in moderate climates.
Operation temperature and operation humidity:
5ºC up to 45ºC, 85% rel. humidity max. (not blocking
ventilation openings).
Intended Use
This device is used to receive and display TV
programmmes.Thedifferentconnection optionsmake
an additional expansion of the reception and display
sourcespossible(variousexternal devices).Thisdevice
is only suitable for dry interior use. This appliance is
intended solely for private domestic use and may not
be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used
as intended, or unauthorized modications have been
made.TooperateyourTVinextremeambientconditions
may cause the damage of the device.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge,unless they have been
given supervision or instructions concerning use
of the appliance by a person responsible for their
safety. Children should be supervised to ensure
that they do not play with the appliance.
Children may not recognize dangers. The
swallowing of batteries can be fatal. Keep
batteries always out of reach of small children. If
a battery is swallowed, seek immediate medical
attention. Keep the packaging lms out of reach
of children, there is a risk of suffocation.
**************
IMPORTANT - Please read these instructions fully before installing or operating
Please read the following recommended safety
precautions carefully for your safety.
SOME DOS AND DON’TS ON THE SAFE USE OF
EQUIPMENT
Thisequipmenthasbeendesignedand manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken if you are
to obtain the best results and safety is to be assured.
**************
DO readtheoperatinginstructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly
made and in accordance with the manufacturer’s
instructions. Switch off and withdraw the mains plug
before making or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on
equipment.
DO route the mains lead so that it is not likely to be
walked on, crushed, chafed, or subjected to excessive
wear and tear or heat.
**************
DON’T remove any xed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to
dripping or splashing, or objects lled with liquids, such
as vases, to be placed on the equipment.

English - 3 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
DON’T place hot objects or naked ame sources
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to res.
DON’T use makeshift stands and NEVER x legs
with wood screws - to ensure complete safety always
t the manufacturer’s approved stand or legs with the
xings provided according to the instructions.
DON’T use equipment such as personal stereos or
radiossothat youaredistractedfrom therequirements
of trafc safety. It is illegal to watch television whilst
driving.
DON’T listen to headphones at high volume, as such
use can permanently damage your hearing.
DON’T leave equipment switched on when it is
unattended unless it is specically stated that it is
designed for unattended operation or has a stand-by
mode. Switch off using the switch on the equipment
and make sure that your family know how to do this.
Special arrangements may need to be made for inrm
or handicapped people.
DON’T continuetooperatethe equipment if youarein
any doubt about it working normally, or if it is damaged
in any way - switch off, withdraw the mains plug and
consult your dealer.
ABOVE ALL
--- NEVER let anyone especially children push
anything into holes, slots or any other opening
in the case - this could result in a fatal electrical
shock;
--- NEVER guess or take chances with electrical
equipment of any kind
--- it is better to be safe than sorry!
Power source
• The TV should be operated only from a 220-240 V
AC, 50 Hz outlet.
• Warning: Do not leave your TV in standby or
operating mode when you leave your house.
Positioning the TV
• For ventilation, please leave a clear space of at least
10cm all around the TV.
10 cm
10 cm
10 cm
• Do not block the ventilation openings.
• Do not place the TV on sloping or unstable surfaces,
the TV may tip over.
• To prevent damage to the TV, do not place any
objects on top of the TV.
• Only use the TV in moderate climates.
Power cord and plug
• Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle
the power cord by the plug. Do not unplug the
appliance by pulling from the power cord and never
touch the power cord with wet hands as this could
causeashortcircuitor electric shock. Never make a
knot in the cord or tie it with other cords. The power
cords should be placed in such a way that they are
not likely to be stepped on. A damaged power cord
can cause re or give you an electric shock. When
it is damaged and needs to be replaced, it should
be done by qualied personnel.
• This TV receiver is supplied with a moulded mains
plug. The mains plug must not be cut off, as it may
contain a special radio interference lter, the removal
of which could lead to impaired performance. If you
wish to extend the lead, obtain an appropriate safety
approved extension lead or consult your dealer.
• Observe the manufacturers instructions when
connecting extension leads to the set. Check the
fuse rating on the new plug; this should be tted with
a 5Amp fuse which conforms to eitherASTA or BSI
(BS1362) approvals, these are easily identiable by
eitherthe ASA or symbols.Ifyouareinanydoubt
about the installation of an extension lead, please
consult a competent electrician.
Moisture and Water
• Do not use thisTV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, and near the
washing machine).
• Do not expose this TV to rain or water, as this may
be dangerous.
• Do not place objects lled with liquids, such as
ower vases, on top of the TV. Avoid from dripping
or splashing.
• If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualied
personnel before operating it any further.
Ventilation
• The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.
• To prevent overheating, these openings must not be
blocked or covered in anyway.
Safety Information

English - 4 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Heat sources and Flames
• Donot exposetheTVtodirectsunlight
or other heat sources.
• The TV should not be placed near to
open ames and sources of intense
heat such as an electric heater.
• Ensure that no open ame sources, such as lighted
candles, are placed on top of the TV.
Headphone Volume
• Excessive sound pressure from earphones
and headphones can cause hearing loss,
please take care.
Wall Mounting (optional)
• To prevent injury, this TV must be securely attached to
thewall inaccordancewiththeinstallationinstructions
(if the option is available).
LCD Screen
• Occasionally, a few non-active pixels may appear
on the screen as a xed blue, green or red point.
Pleasenotethat this doesnotaffecttheperformance
of your product.
• Take care not to scratch the screen with ngernails
or other hard objects.
Cleaning
• Before cleaning, unplug the TV from the wall socket.
• Do not use liquid or aerosol cleaners. Only use a
soft, dry cloth.
Batteries
• Warning: Incorrectinstallation of
batteries may cause battery leakage
and corrosion, resulting in damage to
the remote control.
• Do not mix old and new batteries, or
batteries of different types.
• Do not dispose of batteries in a re.
• Do not dispose of batteries with normal household
waste, take to a local recycling centre.
CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to
recharge non rechargeable batteries and under
no circumstances throw them into re. Danger of
explosion. Do not use unequal batteries (old and
new, Alkaline and carbon, etc.) simultaneously. If
you will not use the device for a long time, remove
the batteries and store the device in a dry and dust
free place. Improper use of batteries may cause an
explosion or leakage. If the batteries have leaked, use
gloves and clean the appliance thoroughly with a dry
cloth! Batteries should not be exposed to heat, such
as sunshine, re or the like.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specied by the manufacturer or have the
same specications as the original one. Unauthorised
substitutions may result in re, electrical shock or
other hazards.
Taking out of service and storing
Unplug the TV from the mains and pack the TV in
an appropriate cardboard box. Remove the batteries
from the remote control and pack the remote control
with the TV set.
NOTE: The TV set should be stored in a dry and
dust-free room.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
throughotherapparatuswithaconnectiontoprotective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
re hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Safety Information

English - 5 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Symbols in this Instruction Book
The following symbols are used in the Instruction
Book as a marker for restrictions and precautions
and safety instructions. Note such information for
security reasons.
WARNING
If you do not pay attention to such a marked warning,
it can cause serious injury or death. Note these
warnings strictly, in order to ensure a safe operation.
CAUTION
Such a precaution is marked, you should take up or
note, to avoid injury or property damage. Note these
instructions strictly, in order to ensure a safe operation.
IMPORTANT
Warnings on the appliance and restrictions are
displayed like this. Read this information strictly
in order to operate the system correctly and avoid
damage.
NOTE: Information about the operation and
additional explanations are marked like this. To be
awareof suchinformationisrecommended to ensure
that the functions can be used optimally.
Theillustrationsandthe OSD in thisoperationmanual
are for explanation purposes and may vary slightly
from the actual operations.
Safety Information
CAUTION
Do not put your ngers in the middle between the TV
and stand, especially when you carry the TV, as they
may be injured.
Occasionally, a few non-active pixels may appear on
the screen as a xed blue, green or red point. Please
note that this does not affect the performance of your
product. Take care not to scratch the screen with
ngernails or other hard objects.

English - 6 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Support
Technical experts are available 7 days a week
Simple help and advice on setting up your digital•
equipment (image).
Guidance on connecting other devices to your•
television such as a DVD player, Sky, home
cinema
system or a games console.
Order spare parts, including that lost remote•
control.
Any other technical issues you may need•
assistance with.
Call us today: 0845 604 0105
Local call rates applies*
Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential
lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.
Getting Started

English - 7 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Environmental Information
Thistelevisionisdesignedtoconsumelessenergyto
help save the environment. You can not only help to
save the environment but you can also save money
by reducing your electricity bills thanks to the energy
efficiency features of this TV. To reduce energy
consumption, you should take the following steps:
You can use the Power Save Mode setting, located
in the Picture menu. If you set the Power Save Mode
as Eco, the TV will switch to energy-saving mode
and the luminance level of TV set will be decreased
to the optimum level. Note that some picture settings
will be unavailable to be changed when the TV is in
Power Save Mode.
If Picture Off is selected, “Screen will be off in 15
seconds.” message will be displayed on the screen.
Select PROCEED and press OK to continue. The
screen will be off in 15 seconds.
If Picture Off is selected, “Screen will be off in 15
seconds.” message will be displayed on the screen.
Select PROCEED and press OK to continue. The
screen will be off in 15 seconds. If you disable Power
Save Mode, Picture mode will be automatically set
to Dynamic.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
Disconnect power when going away for longer time.
It is highly recommended that you activate the
Power Save Mode setting to reduce your annual
power consumption. And also it is recommended to
disconnecttheTV from themainsplugtosaveenergy
more when you do not use.
Please help us to save environment by following
these steps.
Repair Information
Please refer all servicing to qualied personnel. Only
qualied personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV
for further information.
Accessories included
• Remote Control
• Batteries: 2 xAAA
• Instruction Book
• SideAV Connection Cable
• Nero Media Home CD
• Quick Start Guide
• Stand assembly, screws and instructions
Optional Accessories
Wi-Fi
If you would like to connect your TV to a Wi-Fi network, you
will need to purchase a dedicated wireless USB dongle.
WEBCAM
If want use the Skype facility on your TV’s internet
portal, you will need to purchase a dedicated webcam.
TV - Features
• Remote controlled colour TV.
• Fully integrated digital TV (DVB-T-C).
• HDMI connectors for digital video and audio.This
connection is also designed to accept high denition
signals.
• USB input.
• 10000 programmes.
• OSD menu system.
• Scart socket for external devices (such as video, video
games, audio set, etc.).
• Stereo sound system.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Automatic power down after up to six hours.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL(Automatic Volume Limiting).
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7, Windows 8.
• Game Mode (optional).
• Picture off function.
• Ethernet (LAN) for Internet connectivity and service.
• 802.11n WIFI Support (Optional).
• DLNA.

English - 8 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Viewing the TV TV Control button & Operation
1.Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection switch
The Control switch allows you to control the Volume/
Programme/ Source and Standby-On functions of the TV.
To changevolume:Increase the volumebypushing thebutton
up. Decrease the volume by pushing the button down.
To change channel: Press the middle of the button, the
channel information banner will appear on screen. Scroll
through the stored channels by pushing the button up or
down
To change source: Press the middle of the button twice, the
sourcelist willappear onscreen. Scroll throughthe available
sources by pushing the button up or down.
To turn the TV off: Press the middle of the button down and
hold it down for a few seconds, the TV will turn into standby
mode.
NOTE: You can move the switch, upward or downward
to change the volume. If you want to change the channel,
press the middle of the switch once (Position 3) and then
move upward or downward. If you press the middle of the
switch once more, the source OSD will be displayed. To
select desired source, move the switch upward or downward
and release. If you press the middle of the switch and hold
for a few seconds, the TV will switch to standby mode. The
Main menu OSD cannot be displayed via the control buttons
on the TV.

English - 9 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Viewing remote control - TV
NOTE: The Remote Control range is approximately 7m
/ 23ft.
Using My button 1 (*)
This button’s main function is to run Youtube link.
However, if you want to change this function, you
can press MY BUTTON 1 for ve seconds when on a
desired source, channel or link, until the “MY BUTTON
IS SET” message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function. Note that if
you perform rst time installation, MY BUTTON 1 will
return to its default function
Using My Button 2 (**)
Press MY BUTTON 2 for ve seconds when on a
desired source, channel or link, until the “MY BUTTON
IS SET” message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function.
1. Standby
2. Numeric buttons
3. TV-AV / Channel List / DVB-T
4. Volume up/down
5. Mute
6. Navigation buttons
7. Menu on/off
8. OK / Channel List
9. Return/Back
10. Internet portal
11. Media Browser
12. My button 1 (*)
13. Coloured Buttons
14. Mono-Stereo Dual I-II / Audio-Subtitle Language
15. Subtitle on-off / Subtitle (in Media Browser
mode)
16. Rewind (in Media Browser mode)
17. No Function
18. Play (in Media Browser mode)
19. Stop (in Media Browser mode)
20. Pause (in Media Browser mode)
21. Fast Forward (in Media Browser mode)
22. Image size
23. Teletext
24. My button 2 / Channel network type (**)
25. Electronic Programme Guide
26. Exit
27. Quick menu
28. Info
29. Programme Up-Down
30. Previous programme
31. AV / Source selection

English - 10 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Viewing the Connections
NOTE:When connectingadevice viatheSideAV input,youmust usethesupplied connectioncablesto enableconnection.
See the illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC
input with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source.
To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED inputs. | If an external device
is connected via the SCART socket, the TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4
H.264) or while in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting
kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall. | Insert or
remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of
the settings. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the
TV. The module should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be
damaged if the CAM is forcefully inserted.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV PC/YPbPr
Audio
Connection
(side) Side Audio/Video
Connection Cable
(Supplied) PC Audio Cable (Not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
SIDE AV Side AV
Connection
(side) AV Connection Cable
(supplied)
HEADPHONE Headphone
Connection
(side)
PC to YPbPr
YPbPr Video
Connection
(back) PC to YPbPr Connection Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module

English - 11 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Using a Conditional Access Module
IMPORTANT: Insertor removethe CImodule onlywhen
the TV is SWITCHED OFF.
In order to watch certain digital channels, a conditional
accessmodule(CAM)can be necessary.Thismodule
must be inserted in the CI slot of your TV.
1.ObtaintheConditionalAccessModule (CAM)and the
viewing card by subscribing to a pay channel company,
theninsertthosetotheTVusingthefollowingprocedure.
2. Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
3. The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
4. Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
5. When no module is inserted, “No Common
Interface module detected” message appears
on the screen.
Youcanrefertothemoduleinstructionmanualfordetails
of the settings.
CAM
module
Standby Notications
If the TV does not receive any input signal (e.g. From
an aerial or HDMI source) for 5 minutes, the TV will
go into standby. When you next switch-on the TV, the
following message will be displayed:
When the Auto Tv Off timeout is reached, the following
message will be displayed on the screen. Select YES
to shut down the TV. Select NO to cancel. The TV
will switch off as well, if you do not make a selection
on this screen.
If the TV has been left on and not been operated for
4 hours, the TV will go into standby. When you next
switch-on, the following message will be displayed:

English - 12 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Installing the Batteries to the Remote
1. Lift the cover on the back of the remote upward
gently.
2. InstalltwoAAAbatteries.Makesureto match the +
and-endsofthebatteriesin the battery compartment
(observe the correct polarity.
3. Replace the cover.
Connect Power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna / Cable Connection
Connect the “aerial” or “cable TV” plug to theAERIAL
INPUT (ANT) socket located on the back of the TV.
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
To switch on the TV from standby mode either:
Press the “ ” button, P+ / P- or a numeric button on
the remote control.
Press the side function switch until the TV comes on
from standby.
To Switch the TV Off
Press the “ “ button on the remote control or press
the side function switch until the TV switches into
standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note:When theTV isswitchedto standbymode, thestandby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the rst time, the “language
selection” menu appears. The message “Welcome
please select your language!” is displayed in all
language options listed alphabetically.
Press the “ ” or “ ” button to highlight the required
language, press OK button to select. “First Time
Installation” appears. Use “ ” or “ ” button to set the
required country, and press “ ”buttontoselectSearch
Type. Use “ ” or “ ” to set the desired search type.
Available search types are Digital and analog, digital
only and analog only. When set, press “ ” to select
Teletext Language. Use “ ” or “ ” button to set the
“Teletext Language” and select “Scan Encrypted” using
“” or “ ” button. You can set Scan Encrypted as
Yes if you want to scan coded stations.
Default PIN code can change depending on the
selected country.
If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes: 4725,
0000 or 1234.
Press OK button on the remote control to continue and
the following message will be displayed on the screen.

English - 13 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
You can activate Store mode option by using “ ” or “ ”
button. If Store Mode is selected, Store mode option will be
availableinothersettingsmenuandyourTV’sfeatureswill
be illustrated on the top of the screen. A conrmation
screen will be displayed after selecting the Store
Mode. Select YES to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
buttonontheremotecontroltocontinueandthefollowing
message will be displayed on the screen.
You must select a search type to search and store
broadcasts from the desired source.
Aerial Installation
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE: You can press MENU button to cancel.
After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN(*), please select
“Yes” and than press OK.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Note: As the Cable feature is not supported in the
UK, please ensure that you select Aerial during the
FirstTimeInstallation.IfyoumistakenlyselectCable,
please repeat the First Time Installation (which can
be selected from the tuning menu) and select Aerial.
Media Playback via USB Input
You can connect a USB hard disk drive or USB
memory stick to your TV by using the USB inputs of
the TV. This feature allows you to play les stored in
a USB drive. 2.5” and 3.5” inch (hdd with external
powersupply)external hard diskdrivesaresupported.
IMPORTANT! You should back up your les before
making any connections to the TV set in order to
avoid any possible data loss. Manufacturer will not
be responsible for any le damage or data loss. It is
possible that certain types of USB devices (e.g. MP3
Players) or USB hard disk drives/memory sticks may
not be compatible with this TV.
Quickly plugging and unplugging USB devices, is a
very hazardous operation. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and USB device itself. Do
not pull out USB module while playing a le.
Media Browser Menu
You can play photo, music, and movie les stored
on a USB disk by connecting it to your TV and using
the Media Browser screen. To do this, perform the
following: Connect a USB disk to one of the USB
inputs located on the side of the TV.
You can connect two USB devices to your TV. If both
USB devices include music, picture or video les, USB
selection OSD will be displayed on the screen. The
rst USB device connected to the TV will be named
as USB Drive1. Select a device by using “ ” or
“” button and press OK.

English - 14 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
PressMENU buttonandselectMediaBrowsertabby
usingLeft/RightandOK buttons. Main media browser
screen will be displayed. You can display the related
content by selecting the Video, Music or Picture tab.
Follow the button indications under each on screen
menu for media playback features.
YoucansetyourMediaBrowser preferences by using
the Settings dialog.
Using MENU button in Media Browser Mode
Pressing MENU button in Media Browser mode
displays the following menu screen:
You can access Picture, Sound and Settings menu
options using this screen. Press MENU again to exit
from this screen.
Changing Image Size: Picture Formats
Programmes can be watched in different picture formats,
depending on the transmission received. You can
changetheaspectratio(imagesize)oftheTVforviewing
thepictureindifferentzoommodes.Press“ ”button
repeatedlytochange the imagesize.You canshift the
screenup ordown byusing “ ” or “ ” buttons
while in, 14:9 Zoom, Cinema or Subtitle.
Using the Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press MENU button to view main menu.
SelectChannelList item byusingLeft orRight button.
PressOKto viewmenucontents. SelectEdit Channel
List to manage all stored channels. Use Up or Down
and OK buttons to select Edit Channel List. Press
Up or Down button to select the channel that will be
processed. Press Left or Right button to select a
function on Channel List menu. Use P+/P- buttons to
move page up or down. Press MENU button to exit.
Sorting Channel List
You can select broadcasts to be listed in the channel
list. To display specic types of broadcast, you
should useActive channel list setting. SelectActive
channel list from the Channel list menu by using “
” or “ ” button. Press OK button to continue.
You can select a network type option from the list
by using “ ” or “ ” and OK buttons.
Quick Menu
QuickSettingsmenuallowsyoutoaccesssomeoptions
quickly.This menuincludesPowerSave Mode,Picture
Mode, Equalizer Settings, Favourites and Sleep
Timer options. Press Q.MENU button on the remote
control to view quick menu. See the following chapters
for the details of the listed features.

English - 15 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Menu Features and Functions
Picture Menu Contents
Mode For your viewing requirements, you can set the related mode option. Picture mode can be
set to one of these options: Cinema,Game,Dynamic , Sport and Natural.
Contrast Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
Power Save Mode
To set the Power Save Mode as Eco, Picture Off and Disabled.
When the Mode is Dynamic, Power Save mode is automatically set as disabled.
Selecting the Picture mode as Natural, does not automatically enable Power Save mode as Eco.
Backlight
(optional)
This setting controls the backlight level and it can be set to Auto, Maximum, Minimum and
Eco Mode. Backlight function will be inactive if Power Save Mode is set to On. Backlight
cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game.
Noise Reduction If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reducethe noiseamount. NoiseReduction canbe setto oneof theseoptions: Low, Medium,
High or Off.
Advanced Settings
Dynamic Contrast You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set
to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.
HDMI True Black While watching from HDMI source, this feature will be visible in the Picture Settings menu.
You can use this feature to enhance blackness in the picture.
Film Mode Films arerecorded at adifferentnumber of framesper secondto normaltelevision programmes.
Turn this feature on when you are watching lms to see the fast motion scenes clearly.
Skin Tone Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
RGB Gain Press OK button to edit RGB gain. You can congure the colour temperature values using
the RGB Gain feature.
Reset Resets the picture settings to factory default settings.
Autoposition (in
PC mode) Automatically optimizes the display. Press OK to optimize.
H Position (in PC
mode) This item shifts the image horizontally to right hand side or left hand side of the screen.
V Position (in PC
mode) This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock (in PC
mode) Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase (in PC
mode)
Depending on the resolution and scan frequency that you input to the TV set, you may see
a hazy or noisy picture on the screen. In such a case you can use this item to get a clear
picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGAmode settings will be added to the Picture
Settings while in PC mode.

English - 16 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Menu Features and Functions
Sound Menu Contents
Volume Adjusts volume level.
Equalizer:In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu. Equalizer menu
settings can be changed manually only when the Equalizer Mode is in User.
Balance
This setting is used for emphasizing left or right speaker balance.
Headphone/Lineout
When you connect an external amplier to your TV using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the TV, set
this option as Headphone.
Please ensure before using headphones that this menu item is set to Headphones. If
it is set to Line Output, The output from the headphone socket will be set to maximum
which could damage your hearing.Also please ensure before using headphones that
the headphone volume is set to a low level, to prevent damage to your hearing.
Sound Mode You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel
supports that mode.
AVL Automatic Volume Limiting (AVL) function sets the sound to obtain xed output level between programmes (For instance, volume level of advertisements tend to be louder
than programmes).
Dynamic Bass Enables or disables the Dynamic Bass.
Surround Sound Surround sound mode can be changed as On or Off.
Digital Out Sets digital out audio type.
Install and Retune Menu Contents
Automatic Channel Scan
(Retune)
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.
Manual Channel Scan This feature can be used for direct broadcast entry.
Network Channel Scan Searches for the linked channels in the broadcast system.
Analogue Fine Tune You can use this setting for ne tuning analogue channels. This feature is not available
if no analogue channels are stored.
First Time Installation
Deletes all stored channels and settings, resets TV to factory settings and starts rst
time installation. You can follow the instructions in the Initial Installation section for
more information on this process.
Factory-default PIN number is 0000.
Clear Service List (*) This setting is visible only when the Country option is set to Denmark, Sweden,
Norway or Finland. Use this setting to clear channels stored.

English - 17 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Menu Features and Functions
Settings Menu Contents
Conditional Access
Controls conditional access modules when available.
Language Congures language settings.
Parental
Congures parental settings.
Default PIN code can change depending on the selected country.
If you are asked to enter a PIN code for viewing a menu option, use one of the following
codes: 4725, 0000 or 1234.
Timers Sets timers for selected programmes.
Date/Time Sets date and time.
Sources
Enables or disables selected source options.
Network Settings Displays network settings.
Other Settings: Displays other setting options of the TV set:
Menu Timeout Changes timeout duration for menu screens.
Scan Encrypted When this setting is on, search process will locate the encrypted channels as well. If it is
set as Off, encrypted channels will not be located in automatic search or manual search.
Blue Background Activates or deactivates blue background system when the signal is weak or absent.
Software Upgrade To ensure that your TV always has the most update information, you can use this setting. In
order for the proper operation, please ensure that the TV is set to standby mode.
Application Version Displays application version.
Hard of Hearing If the broadcaster enables any special signal concerning the audio, you can set this setting
as On to receive such signals.
Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only if
the broadcaster supports that additional narration track.
Auto TV Off You can set the timeout value of auto off feature.After the timeout value is reached and the
Tv is not operated for selected time , the TV will go off.
Standby Search
(optional)
If you change Standby Search to Off, this function will be unavailable. To use Standby search
please make sure that you select Standby Search as On. If the Standby Search is set to On,
when the TV is in standby mode, available broadcasts will be searched. If the TV locates any
new or missing broadcasts, a menu screen will be displayed, asking you whether or not to
execute these changes. Channel list will be updated and changed after this process. Please
activate Standby Search setting in order to enable your TV for automatically updating the
broadcast frequency of the broadcaster, broadcast denition and similar changes.
Store Mode If you are displaying the TV in a store, you can activate this mode. While Store Mode is
enabled, some items in the TV menu may not be available to be set.
DLNA Renderer DLNA renderer feature allows you to share les stored on your smartphone. If you have a DLNA renderer compatible smartphone and software installed, you can share/play photos with your
TV. See instructions of your sharing software for more information.
Power Up Mode This setting congures the power up mode preference. Always On: The TV always switches on when main on/off button is pressed. / Standby: The TV always powers up in Standby mode. /
Last State: The TV always switches on with the last selected channel/source.
Virtual Remote Enables or disables the virtual remote feature.

English - 18 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Electronic Programme Guide (EPG)
Some, but not all channels send information about
the current and next programmes. Press the “”
button to view the EPG menu.
Up/Down/Left/Right: Navigate EPG.
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views ltering options.
“İ”: Displays, in detail information on programme
selected.
SUBTTL: Press “ ”button to view Select Genre
menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK: Displays programme options.
Text (Search): Displays “Guide Search” menu.
SWAP (Now) : Shows the current programme.
Connectivity Functions
Connecting to a Wired Network
For connecting to a wired LAN network, you
should perform the following steps:
• Connect broadband ISP connection ethernet cable
to the ETHERNET INPUT of your modem.
• Ensure that Nero Media Home software is installed
to your PC.(for DLNAfunction). SeeAppendix G for
more information on the installation process.
• Afterwards, you should connect your PC to the one
of your modem’s LAN connectors (e.g. LAN 1) by
using a proper LAN cable.
• Use another LAN output of your modem (e.g. LAN
2) to enable the connection to your TV. You can add
your TV to your LAN by connecting the LAN port at
the rear of your TV to your modem’s LAN connector
as illustrated.
Lan(Ethernet cable)
Broadband ISP
Connection
Rear of TV
• To access and play shared les, you must Select
MediaBrowser.PressMenu buttonandselectMedia
Browser by using Left or Right button. Press OK to
continue. Select the desired le type and press OK.
You must always use the Media Browser screen to
access and play shared network les.
• PC/HDD/MediaPlayer or any other devices thatare
DLNA 1.5 compatible should be used with wired
connection for higher playback quality.
To congure wired settings please refer Network
Settings section in Settings menu.
• You might be able to connect your TV to your LAN
network depending on your network’s conguration.
In such a case, use an ethernet cable to connect
your TV directly to the network wall outlet.
The modem port
on the wall
Rear of TV

English - 19 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
other WiFi 11b appliances. The standard values of
thetransmissionspeed are thetheoreticalmaximum
values for the wireless standards. They are not the
actual speeds of data transmission.
• Thelocationwherethetransmission ismosteffective
differs depending on the usage environment.
• Wireless LAN adaptor should be connected directly
to the TV’s USB port. USB hubs are not supported.
• To configure wireless settings please refer wifi
section in Settings menu.
• Wireless LAN adaptor supports 802.11 a,b,g & n
type modems. It is highly recommended that you
should use IEEE 802.11n communication protocol
in order to avoid any possible problems while
watching videos.
• Use the other usb input, if you experience problems
with audio/video performance.
• You must change your modem’s SSID when there
are any other modems around with the same SSID.
You can encounter connection problems otherwise.
Use wired connection instead if you experience
problems with wireless connection.
Conguring Network Settings
Your TV’s Network Settings include Wired and Wireless
Connection options. However, if your TV does not have
USB Wi-Fi dongle (sold separately), you should use Wired
Connectiontype. If youtry to connectviaWireless Connection
when your TV does not have a USB Wi-Fi dongle, a warning
screen will appear and the TV will not get an IP address. Try
connecting the LAN cable after this and then the TV will be
able to get an IP address.
Conguring Wired Device Settings
If you are connecting the TV via ETHERNET INPUT,
select Network Type as Wired Device to congure.
Network Type
Network type can be selected as Wired or Wireless
device, in accordance with the active connection to the
TV set. Select this as Wired if you have connected to
the TV a LAN cable. Select as Wireless if you connect
via the wireless USB dongle (sold separately).
Connecting to a Wireless Network
IMPORTANT: A dedicated wireless USB dongle
(available from your dealer) is required for Wi-Fi
operation.
• To use your TV with your wireless network, you
need a dedicated wireless USB dongle. To make
your modem’ s SSID visible, you should change
your SSID settings via modem’s software. The TV
cannot connect to the networks with hidden SSID.
For connecting to a wireless LAN network, you
should perform the following steps:
1. Connect broadband ISP connection ethernet
cable to the ETHERNET INPUT of your modem.
2. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
3. Afterwards, you should connect wireless adaptor
to one of the USB inputs of the TV.
4. To configure wireless settings please refer
NetworkSettingssection in thefollowingsections.
Wireless Lan
Adaptor
USB Inputs (Side of the TV)
Broadband ISP
Connection
• A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands designed to
increase bandwidth. Optimized for smoother and
faster HD video streaming, file transfers, and
wireless gaming.
• Use LAN connection for quicker le sharing between
other devices like computers.
• The frequency and channel differ depending on
the area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the conguration of these
products, the radio wave conditions, the line trafc,
and the products that you use. The transmission
may also be cut off or get disconnected depending
on the radio wave conditions DECT phones, or any