
HOFA Ceiling Sail
Assembly Instructions
1. Place drilling template
Place the template at the corners of the HOFA
Ceiling Sail as shown above and mark the drilling
points.
Repeat the step for the opposite points of the cei-
ling sail.
2. Screw the hook into the sail
Now screw the screw hooks into the marked
drilling points so that the hooks in the sail all
point in the same direction.
3. Attach the template to the ceiling
Let a second person help you and attach the dril-
ling template to the ceiling with some adhesive
plasticine or tape.
Now mark the rst drilling points and set an au-
xiliary line at the lower edge.
4. Rotate template
To get the drilling points of the opposite half,
the template must be rotated and moved.
With the ceiling sail 180 the distance is 60 cm.
Reattach the template at the measured position
and mark the last drilling points.
Assembly steps