Hoft & Wessel HW 90396 User manual
www.skeye.com
Quick Start Guide
skeye.pos mobile
HW 90396
Display with
Touch Screen
Views and Functions
Battery Eject
Button
Battery Lock Antenna
Connector
Battery
Desktop Cradle
Connector
Reset Button
Stylus Printer Cover
Release Lever
Shoulder Strap Attachment Slot
Magnetic Card
Swipe Slot
Buttons
Printer
Paper Cutter
Version 1.1
Power Input
Cover
(without function)
Chip Card Slot
Stylus
IrDa Port
Headset Jack
(Lineout))
Microphone
Contact:
Höft & Wessel AG
Skeye
Rotenburger Str. 20
30659 Hannover
Phone. +49 511 6102 0
Fax. +49 511 6102 411
Mail. [email protected]
Web. www.skeye.de
Serviceline. +49 1803 232829
(0.09 EUR per min. within Germany)
Scanner
Scan
Keys
Switching on the device
Use the yellow button to switch the device on or off.
Yellow On/Off
Button
Desktop Cradle
LEDs
red – green – yellow Connection to the
skeye.pos mobile
Hook to engage
the skeye.pos
mobile
Lever to unlock
the skeye.pos
mobile
Please note:
Make sure that you place the skeye.pos mobile on the desktop cradle
with a battery fitted and locked in place. Otherwise, the skeye.pos
mobile cannot be switched on.
• Position the skeye.pos mobile over the desktop cradle so that the
plug-type connection for the desktop cradle and the two
attachment slots for the clips are precisely aligned .
• Press the skeye.pos mobile in the middle of the device above and
below the display to engage it into the desktop cradle.
• To remove the device from the desktop cradle is has to be
unlocked using the respective lever.
Placing the skeye.pos mobile
Inserting a SIM Card
• Press the yellow button to switch off the skeye.pos mobile.
• Remove the battery.
Battery eject
button
Security
Module
• Slide the SIM card with the chip pointing
down into the card slot. Press to engage
the card.
• Press the battery eject button while
pulling the security module out of
the mobile terminal by applying light
pressure on the recessed grip.
• Located on one side of the security
module slot is a SIM card slot.
• Install the security module.
• Insert the battery and lock.
If your devices supports the "GRRS/GSM" option, you have to insert a
SIM card of your provider to be able to use this function.
Reset Button
Reset
The purpose of the reset function is to cancel the running/hanging
user program at any point.
Press the reset button carefully with very little effort. Use a long thin
object such as a straightened paper clip.
• Slide the battery lock to the left to this symbol:
• Place a charged battery with the rounded side facing downwards.
• Fold the battery downwards and press it into place.
• Slide the battery lock to the right to this symbol:
The battery is now locked and you can switch on the skeye.pos
mobile.
Inserting/Changing the Battery
Battery Lock
Battery
Battery Eject Button
Please note:
Prior to operation, the storage battery of the device (placed in desktop
cradle) has to be loaded.
In case of a long-term storage, the skeye.pos mobile changes to
"Complete Off" to preserve the floating battery.
If the skeye.pos mobile is in "Complete Off" mode, it cannot be
switched on using the yellow button. In this case, a Reset
has to be triggered on the device.
SIM Card
Slot
Other Hoft & Wessel Handheld manuals
