Holland Grill BHA136SU1 User manual

READ THIS BOOK FIRST
BARBECUE INDUSTRY
ASSOCIATION MEMBER
TM TM
www.hollandgrill.com
©The Holland Grill Co., Inc. V2009a
Instruction Manual
Model:
By Holland
BHA136SU1
L.P.Tank
not included.

SEARMATE OWNER`S MANUAL
MOUNTING INSTRUCTION ADDENDUM
WHEN INSTALLING THE SEARMATE GAS HOSE TO THE "T" FITTING THAT WILL ATTACH TO THE
GAS VALVE OF YOUR HOLLAND GRILL, IT IS VERY IMPORTANT TO POSITION THE HOSE SO IT
DOES NOT TOUCH THE BOTTOM OF THE GRILL. THE BOTTOM SURFACE OF THE GRILL IS VERY
HOT WHEN IN USE, AND COULD CAUSE YOUR GAS HOSE TO MELT AND DEVELOP A LEAK IF
THE HOSE IS RESTING ON THE BOTTOM SURFACE.
ALSO POSITION ALL HOSES SO THAT YOUR CABINET DOOR (IF SO EQUIPPED) CLOSES EASILY
AND COMPLETELY.
NOTE: ALWAYS CHECK ALL FITTING/HOSE CONNECTIONS FOR LEAKS USING A SOLUTION OF
SOAPY WATER AND A TOOTHBRUSH. IF YOU SMELL GAS, OR YOU SEE A LEAK AFTER
APPLYING THE SOAPY WATER SOLUTION, IMMEDIATELY TURN OFF ALL GAS AND TIGHTEN ALL
CONNECTIONS.
IF YOU FEEL UNCOMFORTABLE DOING THIS, TURN OFF ALL GAS SUPPLY AND CALL HOLLAND`S
SERVICE DEPARTMENT AT 800-880-9766. SERVICE DEPARTMENT HOURS ARE MON.-THUR 8AM
TO 5PM ET; FRIDAY 8AM TO 4PM ET: CLOSED SATURDAY AND SUNDAY.
grill bottom
SearMate gas hose
"T" fitting
Grill regulator/hose
Grill gas valve
Leave plenty of
room between
SearMate gas hose
and grill bottom
LEAK TEST: Use an old toothbrush
and a solution of soapy water to
check for leaks at the point where
any gas hose/fitting connects to a
gas supply. ubbles will appear if
there is a leak. IMMEDI TELY
SHUT OFF G S SUPPLY and
tighten fittings until they do not leak.
Do not overtighten.
C UTION