Holman WS5052B User manual

WS5052B
INSTRUCTION MANUAL
Weather
Alarm Clock
WS5052B Weather Alarm Clock.indd 1 24/07/13 8:22 PM

Table of Contents
Technical Data
Technical Data........................ . p1-p3
Glossary.................................. . p4-p5
Initial Operation............................p6
Programming
Manual Time Setup................. . p7-p8
Daily Alarm Setup.........................p9
Snooze / 12-24Hr / ºC-ºF / Max-Min . . p10
Temperature Alert Setup........... . p11
Weather Forecast............................... . p12
Barometer & Bar Data History...........p13
Wireless Connection......................... . p14
Tips......................................................p15
Weather Record Notes Pages....p16-p17
Warranty / QR Code................Back Page
WS5052B Weather Alarm Clock.indd 2 24/07/13 8:22 PM

WS5052B HOLMAN iWeather
Weather Alarm Clock
Thank you for purchasing this device,
please read the operating instructions
carefully to familarize yourself with the
features and modes of operation before
using the Weather Station.
Table of Contents
Technical Data
1
Weather Forecast............................... . p12
Barometer & Bar Data History...........p13
Wireless Connection......................... . p14
Tips......................................................p15
Weather Record Notes Pages....p16-p17
Warranty / QR Code................Back Page
WS5052B Weather Alarm Clock.indd 3 24/07/13 8:22 PM

Technical Data - Cont.
2
Technical Data - Cont.
Technical Details: Indoor Unit
• Six keys: MODE, +, - , HISTORY,CHANNEL,SNOOZE/LIGHT.
• Time display in 12/24 format
• Continuous perpetual calendar up to 2099
• Display of Date, Month and Day of week
• Day of week display available in 7 languages, i.e. German, English, Italian, French, Dutch Spanish,Danish.
• Dual alarm with snooze function (alarm will activate every ve minutes)
• Altitude-setting for calculation of air pressure.
• 5 weather forecasts: sunny, partly sunny, cloudy, rainy, stormy, weather symbol can be selected manually.
• Barometer and bar data of 12 hours history for air pressure.
• Indoor/outdoor temperature and humidity
• Thermometer measuring range inside: 0°C to +50°C , outside -20°C~60 °C
• Temperature display elective in °C or °F
• Temperature alert
• Low battery indication
• Orange background illumination LED.
• Battery: 2 x AA, LR06, 1.5V
WS5052B Weather Alarm Clock.indd 4 24/07/13 8:22 PM

Technical Data - Cont.
3
Technical Data - Cont.
Technical Details: Indoor Unit
• Six keys: MODE, +, - , HISTORY,CHANNEL,SNOOZE/LIGHT.
• Time display in 12/24 format
• Continuous perpetual calendar up to 2099
• Display of Date, Month and Day of week
• Day of week display available in 7 languages, i.e. German, English, Italian, French, Dutch Spanish,Danish.
• Dual alarm with snooze function (alarm will activate every ve minutes)
• Altitude-setting for calculation of air pressure.
• 5 weather forecasts: sunny, partly sunny, cloudy, rainy, stormy, weather symbol can be selected manually.
• Barometer and bar data of 12 hours history for air pressure.
• Indoor/outdoor temperature and humidity
• Thermometer measuring range inside: 0°C to +50°C , outside -20°C~60 °C
• Temperature display elective in °C or °F
• Temperature alert
• Low battery indication
• Orange background illumination LED.
• Battery: 2 x AA, LR06, 1.5V
Outdoor sensor:
• Frequency: 433 MHz
• Battery: 2 x AAA, LR03, 1.5V
• 3 channels
• Transmitting distance: 50M open area.
• Sit at least 1 meter of the ground.
WS5052B Weather Alarm Clock.indd 5 24/07/13 8:22 PM

1. Date
2. Month
3. Day of Week
4. Time
5. Radio controlled signal
(not applicable in Australia)
6. Alarm
7. Indoor low battery
8. Temperature trend
9. Indoor temperature
10. Indoor humidity
11. Indoor humidity trend
12. Air pressure trend
13. Freeze
14. Weather icons
15. Barometer reading
16. Pressure history & altitude
17. Outdoor humidity trend
18. Outdoor humidity
19. Summer / Winter time
(not applicable in Australia)
20. Outdoor temperature
21. Indoor low battery
22. Indoor temperature trend
23. Channel and RF symbol
24. Temperature alert
Glossary
4
A= MODE B=+ C= - D= HISTORY E=CHANNEL F=SNOOZE/LIGHT
WS5052B Weather Alarm Clock.indd 6 24/07/13 8:22 PM

18. Outdoor humidity
19. Summer / Winter time
(not applicable in Australia)
20. Outdoor temperature
21. Indoor low battery
22. Indoor temperature trend
23. Channel and RF symbol
24. Temperature alert
Glossary
5
A= MODE B=+ C= - D= HISTORY E=CHANNEL F=SNOOZE/LIGHT
WS5052B Weather Alarm Clock.indd 7 24/07/13 8:22 PM

6
Initial Operation - Outdoor Sensor & Indoor Sensor
Programming - Manual Time Setup
Outdoor Sensor
• Please install batteries in the Outdoor Sensor rst.
• Open the battery compartment located on the rear side of the device.
Place the batteries in the battery compartment. Observe the shown polarity.
• Please place in a sheltered position outside where it will not get wet or weathered.
Indoor Unit
• Open the battery compartment located on the rear side of the device.
Place the batteries in the battery compartment. Observe the shown polarity.
• The altitude will be ashing, use “+“ or “-“ to set the altitude of your position, then press
“HISTORY”, Weather symbol ashing, use “+“ or “-“ to choose the weather.
• The station is now connecting to the outdoor sensor. This process takes about 3 minutes.
Then the display shows the outdoor temperature and humidity, in case of failure of reception,
press “CHANNEL“ for more than 3 seconds to receive again.
• The ashing Radio controlled symbol will disappear when connected.
Manual Time Set-up
• Press and hold “MODE“ for 3 seconds.
• The display for the 12/24 is ashing. Use “+ “ and “-“ to select. Press “MODE “ to conrm.
• The display for the hour is ashing. Use “+ “ and “-“ select the hour. Press “MODE “ to conrm.
• The display for the minutes is ashing. Use “+ “ and “-“ to select the minutes. Press “MODE “ to conrm.
• The display for the year is ashing. Use “+“ and “-“ to select the year. Press “MODE “ to conrm.
WS5052B Weather Alarm Clock.indd 8 24/07/13 8:22 PM

7
Initial Operation - Outdoor Sensor & Indoor Sensor
Programming - Manual Time Setup
Outdoor Sensor
• Please install batteries in the Outdoor Sensor rst.
• Open the battery compartment located on the rear side of the device.
Place the batteries in the battery compartment. Observe the shown polarity.
• Please place in a sheltered position outside where it will not get wet or weathered.
Indoor Unit
• Open the battery compartment located on the rear side of the device.
Place the batteries in the battery compartment. Observe the shown polarity.
• The altitude will be ashing, use “+“ or “-“ to set the altitude of your position, then press
“HISTORY”, Weather symbol ashing, use “+“ or “-“ to choose the weather.
• The station is now connecting to the outdoor sensor. This process takes about 3 minutes.
Then the display shows the outdoor temperature and humidity, in case of failure of reception,
press “CHANNEL“ for more than 3 seconds to receive again.
• The ashing Radio controlled symbol will disappear when connected.
Manual Time Set-up
• Press and hold “MODE“ for 3 seconds.
• The display for the 12/24 is ashing. Use “+ “ and “-“ to select. Press “MODE “ to conrm.
• The display for the hour is ashing. Use “+ “ and “-“ select the hour. Press “MODE “ to conrm.
• The display for the minutes is ashing. Use “+ “ and “-“ to select the minutes. Press “MODE “ to conrm.
• The display for the year is ashing. Use “+“ and “-“ to select the year. Press “MODE “ to conrm.
WS5052B Weather Alarm Clock.indd 9 24/07/13 8:22 PM

8
Programming - Manual Time Setup - Cont.
Programming - Daily Alarm Setup
• The display for the month is ashing. Use “+“ and “-“ to select the month. Press “MODE “ to conrm.
• The display for the date is ashing. Use “+“ and “-“ to select the date. Press “MODE “ to conrm.
• The language selection for the display of the weekdays is ashing. Use “+“ and “-“ to select the
language. Press “MODE “ to conrm.
Information:
• The clock automatically changes from set-up mode to time display mode if no keys are pressed
for 20 seconds.
• Press “MODE” to switch from time display to A1 display.
• Press and hold the key “MODE” for 3 seconds, the ashing alarm time is shown.
• The hour display of the alarm time will ash. Use “+“ or “-“ to select hour. Press “MODE “ to conrm.
• Then follow with the minutes. Use “+“ or “-“ to select the minutes. Press “MODE “ to conrm.
• Then press “MODE” to switch from A1 display to A2 display. (The setting is the same as for A1)
• A1 is for Monday to Friday and A2 is for Saturday and Sunday.
Daily alarm on/off
• When showing A1 alarm time, press “-“ to activate the alarm 1 with alarm symbol showing.
• Press “MODE” again to cancel the alarm.
• When showing A2 alarm time, press “-“ to activate the alarm 2 with alarm symbol showing.
• Press “MODE” again cancel the alarm .
Information:
• The clock automatically changes from set-up mode to time mode if no keys are pressed for 20 seconds .
• Press any key to turn off alarm when beeping. (The alarm sounds for 2 minutes if no key is pressed to stop it)
WS5052B Weather Alarm Clock.indd 10 24/07/13 8:22 PM