Home Accents Holiday 21RT1792111 User manual

OMS THD SKU # 1006 184 671
Model # 21RT1792111
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 52in LED Shark with Gift Box. We strive
to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
52in LED Shark with Gift Box
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to the place of purchase with purchase receipt.1-877-527-0313
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor, ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-877-527-0313
Diagram of Parts
Parts List
Locater Name Qty.
A Hat 1
B Front Halves of Body 2
C Back Halves of Body 2
D Dorsal Fin 1
E Pectoral Fin 2
F Tail 1
G Front Gift Box 1
H Middle Gift Box 1
I Back Gift Box 1
Hardware List
Locater Name Qty.
J Ground Stake 4
K Plastic Tie 20
L Spare Fuse 4
M Spare Bulb 5
A
G
B D
E
F
C
J K
H I
M
L
E

A
SSEMBLY
1 Assembling the Front and Back Halves of Body
Insert the connecting rod on the bottom section of the Front and Back
Halves of Body (B,C) into the connecting holes on the upper sections
of the Front and Back Halves of Body (B,C) and fasten at the
connecting loops with Plastic Ties (K).
2 Assembling the Back Halves of Body to the Front Halves
Insert the connecting rods on the Back Halves of Body (C) into the
connecting holes on the Front Halves of Body (B) and fasten at the
connecting loops with Plastic Ties (K).
3 Assembling the Pectoral Fins and Tail to the Body
Insert the connecting rods on the Pectoral Fins (E) and the Tail (F) into
the matching connecting holes on the Back Halves of Body (C) and
fasten at the connecting loops with Plastic Ties (K).
4 Assembling the Hat and Dorsal Fin to the Body
Insert the connecting rods on the Hat (A) and the Dorsal Fin (D) into the
matching holes on the top of the Body (B,C) .
5 Assembling the Gift Boxes to the Body
Insert the connecting rods of the Back Gift Box (I) into the holes on the
left side of the Middle Gift Box (H). Insert the connecting rods on the
bottom of the Front and Middle Gift Box (G,H) into the connecting holes
on the top of the Back Half of Body (C).
6 Securing the Gift Boxes
Fasten the Gift Boxes at the connecting loops with Plastic Ties (K).
7 Assembling the Ground Stakes
Insert Ground Stakes (J) over the metal frame at the Pectoral Fins and
Tail (per diagram below) then into the ground firmly.
C
B
K
B
K
C
E
F
K
E
B
D
A
C
G H
I
C
K
J