Home Accents Holiday TY-S46-C User manual

SKU # 1001 777 426
Model # TY-S46-C
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 2-Piece LED Lighted Spiral Trees (4ft & 6ft).
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
2-Piece LED Lighted Spiral Trees (4ft & 6ft)
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to the place of purchase with purchase receipt.
1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts for 4ft Spiral Tree
Hardware
Parts List for 4ft Spiral Tree
Locater Name Qty.
A Spiral Tree 1
B Driving Cap 1
C Plastic Cap 1
D Pole Section 2
E Base Tree Stand 1
Hardware List
Locater Name Qty.
F Spare Fuse 2
G Spare Bulb 2
F G
A B C
D E

ASSEMBLY for 4ft Spiral Tree
1 Assemble the Spiral Tree Pole Section and Base Tree
Stand for Indoor Use
Place the Base Tree Stand (E) on flat ground or surface. Connect the
Two Pole Sections (D) on top of the Base Tree Stand (E) connecting
pole with the tapered ends up. Place the Plastic Cap (C) on top of the
Top Pole Section with the flanged end down.
2 Assemble the Spiral Tree over the Pole Section and Base
Tree Stand
Place the Spiral Tree (A) over the assembled Pole Section and align the
hole on the plastic top over the Pole Section and Plastic Cap. Allow the
Spiral tree to "drop" down to the ground. Align the bottom of the Star Tree
Topper with the top of the Plastic Cap (C). Hook the bottom of the Spiral
Tree to 2 sides of the Base Tree Stand (E) with the hooks attached to the
wires. (see diagram below)
3 Assemble the Spiral Tree Pole Section and Base Tree Stand
for Outdoor Use
Position the Tree Stand (E) sideways so that the sharp Stake end is facing
down. Insert it into the Ground. Use the Driving Cap (B) , if needed, on top
of the Base Tree Stand pole by lightly striking it with a hammer to assist in
inserting the Stake end into the ground. (Remove Driving Cap (B) is used)
Connect the two Pole Section (D) on top of the Stand. Place the Plastic
Cap (C) on top of the Top Pole Section.
4 Assemble the Spiral Tree over the Pole Section and Securing
the Spiral Tree to the Ground
Place the Spiral Tree (A) over the assembled Pole Section and align the hole
on the plastic top over the Pole Section and Plastic Cap. Allow the Spiral tree
to "drop" down to the ground.Align the bottom of the Star Tree Topper with
the top of the Plastic Cap (C). Hook the bottom of the Spiral Tree to 2 sides
of the Base Tree Stand (E) with the hooks attached to the wires. (see
diagram below)
E
C
D
A
A
E
C
D
E
A
A

SKU # 1001 777 426
Model # TY-S46-C
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 2-Piece LED Lighted Spiral Trees (4ft & 6ft).
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
Set of 2 - LED Lighted Spiral Trees (4ft & 6ft)
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to the place of purchase with purchase receipt.
1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 7.2 Watts (0.06
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts for 6ft Spiral Tree
Hardware
Parts List for 6ft Spiral Tree
Locater Name Qty.
A Star Tree Topper 1
B Spiral Tree 1
C Driving Cap 1
D Plastic Cap 1
E Pole Section 3
F Stake Section 1
G Tree Stand Leg 4
H Tree Stand
Center Cone 1
Hardware List
Locater Name Qty.
I Ground Stake 4
J Spare Fuse 2
K Spare Bulb 2
I J K
A B C D
E F
G H

ASSEMBLY for 6ft Spiral Tree
1 Assembly the Tree Stand
Slide the four legs of the Tree Stand Legs (G) into the Tree Stand
Center Cone (H). Press together firmly until they lock in place.
2 Assembly the Pole Section to the Tree Stand
Insert one of the Pole Section (E) ,with the tapered end up, into the hole
at the top of the Tree Stand Center Cone ((H) connected to the Tree
Stand Legs (G). Attach the other two poles on top of one another and
on top of the first pole.
3 Assembly the Spiral Tree to the Pole Section
Place the Spiral Tree (B) over the Pole Section. Align the center of the
Spiral Tree plastic top to the Top of the Pole Section .Allow the Spiral
Tree to "drop" down to the ground around the Pole Section. The top
pole will stop the top of the Spiral Tree and hold it in place.
4 Assembly the Star Tree Topper to Pole Section.
Place the Plastic Cap (D) on top of the assembled Pole Section with the
Spiral Tree. Insert the bottom of the Star Tree Topper (A) into the top of
the Plastic Cap firmly.
5 Securing the Spiral Tree
Tie the four strings at the bottom of the Spiral Tree (B) to the tip of the
Tree Stand Legs (G) as shown in the diagram below.
6 Outdoor Use: Spiral Tree to the Ground
Replace the Tree Stand with Stake Section (F). Use the Driving Cap (C) ,
if needed, on top of the Base Tree Stand pole by lightly striking it with a
hammer to assist in inserting the Stake end into the ground (Remove
Driving Cap (C) is used); then follow steps 2 to 4 above. Tie the four
strings at the bottom of the Spiral Tree to the Ground Stakes (I). Pull
tightly and stake it to the Ground to secure.
G
H
E
D