Home Accents Holiday TY311+310-1411 User manual

USEAND CARE GUIDE
5ft LED Lighted Elegant Reindeer & Sleigh
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 5ft LED Lighted Elegant Reindeer & Sleigh. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 day limited guarantee due to defects in material and workmanship.
Return the product with purchase receipt to the location of purchase for refund within 90 days
of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDs, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to store. Assembly of this product may
require more than one person.
PACKAGE CONTENTS
SKU # 1001788263
YOW SKU # 724 792
Model # TY311+310-1411
N O P
Q
Package Contents/Parts List
Part Description Quantity
A Ears 2
B Antlers 2
C Head 1
D Neck 1
E Front Legs 2
F Hind Legs 2
G Body 1
H Tail 1
Package Contents/Parts List
Part Description Quantity
I Interior Panel 1
J Runners 2
K-L Side Panels 4
M Bow 2
N Ground Stakes 8
O Plastic Ties 20
P Fuse 2
Q Replacement Bulbs 7
C
B
A
D
E
F
G
H
I
J
K
L M
M

Assembly
Assembling the Reindeer and Sleigh
Step 1. Insert metal rods attached to the top of Front Legs（E）and Hind Legs (F) into the matching
holes on the underside of Body (G). (FIG 1)
Step 2. Fasten each Leg and the Body together with Plastic Ties (O) around the metal rings on the
frames then stand the Deer in an upright position. (FIG 1)
Step 3.Attached the Support Bars on the inside of one Leg to the nut attached to the inside of the
opposite Leg. (FIG.1)
Step 4. Insert the rods of Neck (D) into the matching holes on the front of Body and fasten with Plastic
Ties. (FIG 2)
Step 5. Insert the rods of the Head (C) into the matching holes on the Neck (D). Insert theAntlers (B)
and Ears (A) into the holes on top of the Head. (FIG 2)
Step 6. Insert the rod of Tail (H) into the matching hole in the rear of the Body (G). Attach the BOW (M)
on the Left Side of Deer's shoulder area. (FIG 1&2)
Step 7. Secure the Deer to the ground with the Ground Stakes (N). FIG.2
Step 8. Unfold each Side Panel (K & L) and Runner (J) of Sleigh. Insert the rods of the side of the
smaller Panel (K) into the matching holes on larger panel (L). Insert the rods on the bottom of the
Side Panels into the matching holes on top of the Runners. Secure with plastic Ties. (FIG 3&4)
Step 9.The Runners (J) come with metal bars to stabilize the Sleigh.Attach the bars to
the opposite side Runner and fasten them with Plastic Ties. (FIG.4)
Step 10. Unfold the Interior Panel (I). Insert the rods of the Interior Panel into the
matching hole at the each side of Side Panel (K & L). Secure with PlasticTies. (FIG.5)
Step 11. Attach the BOW (M) on the left side of Sleigh on Panel L. Secure the Sleigh to
the ground with the Ground Stakes (N). FIG.6
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source. Do not
unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 9.6 Watts (0.08Amps)
for Reindeer and rated at 7.2Watts (0.06 Amps) for Sleigh. Do not overload. Do not
connect to other lighting strings, decorative outfit or other electrical products. Before
you use or re-use this product inspect it carefully. Return to Store or discard if the
product has cuts, damage or frayed wire insulation on cords, cracks in the socket
enclosures, loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product is
placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.3
FIG.1 FIG.2
FIG.6
FIG.4
FIG.5